Highwood Spa Step Assembly Instructions

Hello! I've reviewed the Assembly Guide for the 2-Step 48" Hot Tub Spa Step. This document details the steps of assembling product, which involves using bolts and a hex key. I am ready to answer any questions you have about assembling this spa step.
What size bolts are used for assembly?

What tool is needed for assembly?

Should the bolts be fully tightened immediately?

For information on Care and Cleaning or to register your

highwood product, please visit www.highwood-usa.com. PAGE 1 OF 1

INCLUDED TOOLS

5/32" HEX KEY

IMPORTANT!

DO NOT fully tighten the bolts until all

bolts are started. Once all bolts are inserted,

go back & tighten all the bolts.

Retain these instructions for future reference

HARDWARE

highwood

NATURE'S CLOSEST RIVAL



The Spa Collection

2-Step 48" Hot Tub Spa Step

Assembly Guide

1) Place (4) Treads on Flat Surface with inserts facing up as shown.

STP-IA1

03.01.18

2) Attach Riser Assembly to Treads using (8) "A" bolts as shown.

x32

1/4"-20 X 1-1/4"

3) Repeat Step 2 with (3) remaining Riser Assemblies.

TREAD

RISER ASSEMBLY