Quadratec 12018 Installation guide

Brand
Quadratec
Model
12018
Type
Installation guide

This manual is also suitable for

Quadratec 12018 Luminix Tail Lamps are designed to provide enhanced visibility and style for your Jeep Wrangler JK. With their durable construction and innovative features, these tail lamps are built to withstand the rigors of off-road adventures while also making your vehicle stand out on the road.

Key features of the Quadratec 12018 Luminix Tail Lamps include:

  • Plug-and-play installation for easy setup
  • Durable construction for long-lasting performance
  • Bright LED lights for improved visibility
  • Sequential turn signals for added safety and style
  • Smoked lens for a sleek and modern look

Quadratec 12018 Luminix Tail Lamps are designed to provide enhanced visibility and style for your Jeep Wrangler JK. With their durable construction and innovative features, these tail lamps are built to withstand the rigors of off-road adventures while also making your vehicle stand out on the road.

Key features of the Quadratec 12018 Luminix Tail Lamps include:

  • Plug-and-play installation for easy setup
  • Durable construction for long-lasting performance
  • Bright LED lights for improved visibility
  • Sequential turn signals for added safety and style
  • Smoked lens for a sleek and modern look
12018I
PT — 6/29/18 Page 1 of 2 12018I
Putco Luminix Tail Lamps have a limited 2 year warranty. For more warranty information, please contact Customer
Service at 1-800-247-3974 Monday-Friday 8:00 a.m. - 5:00 p.m. (Central Standard Time).
2007-2018 Jeep Wrangler JK
Luminix Tail Lamp Installation
Congratulations on your purchase of a high quality PUTCO product. Should you need any application
or technical assistance, feel free to call us at: 1-800-247-3974
Monday-Friday 8:00 a.m. - 5:00 p.m. (Central Standard Time)
Contact your PUTCO dealer for other quality accessories.
Please read all instrucons before installaon and to check to see that all parts are included.
KIT CONTENTS:
Description Qty.
Driver Side Tail Lamp 1
Passenger Side Tail Lamp 1
Installation Instructions:
1. Uninstall driver’s side factory tail lamp by removing 2 Phillips head
screws as shown in Figure 1. Unplug wiring harness.
Figure 1: Remove 2 screws.
You can find a full installation video on our YouTube page!
Tools Needed:
− Phillips Head Screwdriver
− Flat Head Screwdriver or Chisel
− Zip-Ties
hps://www.youtube.com/watch?v=_exTgiEEOTA
12018I
PT — 6/29/18 Page 2 of 2 12018I
Putco Luminix Tail Lamps have a limited 2 year warranty. For more warranty information, please contact Customer
Service at 1-800-247-3974 Monday-Friday 8:00 a.m. - 5:00 p.m. (Central Standard Time).
2. Remove expanding foam in cavity behind tail lamp to expose hole in
floor board, shown in Figure 2. The foam can be removed with a
flat head screwdriver, chisel, or your hand.
3. Push tail lamp link cable through the exposed hole. Connect factory
wiring harness to Luminix tail lamp. Mount the load resistor to a
metal surface away from plastic pieces and wires. This resistor can
get very hot, so use caution if the vehicle has been running. Mount
Luminix tail lamp using factory screws, making sure that the
mounting tab on the tail lamp is inside the sheet metal of the Jeep
(see Figure 3).
4. Repeat Steps 1-3 on the passenger’s side.
5. Connect the tail lamp link cables. Route the cable between the rear
bumper support and bumper cover. Zip-tie it in place. Take care to
keep the cable away from the exhaust, moving components, and
pinch points.
Enjoy your new Luminix Jeep Tail Lamps!
For other quality Jeep products, visit www.Putco.com
Figure 2: Foam removed and
hole exposed.
Figure 3: Mounting tab and linking cable.
Tail Lamp Link cables
Mounting tabs
  • Page 1 1
  • Page 2 2

Quadratec 12018 Installation guide

Brand
Quadratec
Model
12018
Type
Installation guide
This manual is also suitable for

Quadratec 12018 Luminix Tail Lamps are designed to provide enhanced visibility and style for your Jeep Wrangler JK. With their durable construction and innovative features, these tail lamps are built to withstand the rigors of off-road adventures while also making your vehicle stand out on the road.

Key features of the Quadratec 12018 Luminix Tail Lamps include:

  • Plug-and-play installation for easy setup
  • Durable construction for long-lasting performance
  • Bright LED lights for improved visibility
  • Sequential turn signals for added safety and style
  • Smoked lens for a sleek and modern look
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents