2. ekwb
  3. EK-FC580 DCII I/O bracket

ekwb EK-FC580 DCII I/O bracket Installation guide

  • I have reviewed the user manual for the EK-FC580 DCII I/O bracket. This document provides instructions for replacing the original I/O bracket, emphasizing the need for expert installation to avoid damage. I'm ready to answer any questions you may have regarding the installation process or the product itself.
  • Who should install this product?
    What could happen if I install it incorrectly?
    What does the first step involve?
Installation and mounting manual for
EK-FC580 DCII I/O bracket
Installation and mounting manual for
EK-FC580 DCII I/O bracket
This product is intended for installation only by expert users. Please consult with a qualified technician for
installation. Improper installation may result in damage to your equipment. EK Water Blocks assumes no
liability whatsoever, expressed or implied, for the use of these products, nor their installation.
This product is intended for installation only by expert users. Please consult with a qualified technician for
installation. Improper installation may result in damage to your equipment. EK Water Blocks assumes no
liability whatsoever, expressed or implied, for the use of these products, nor their installation.
STEP 1: REPLACE THE ORIGINAL I/O BRACKET
STEP 1: REPLACE THE ORIGINAL I/O BRACKET
Remove the two screws and four hexagonal nuts securing the original three-slot I/O
bracket to the circuit board. Replace the original I/O bracket with enclosed EK FC580
DCII I/O bracket and install it using the original screws.
Remove the two screws and four hexagonal nuts securing the original three-slot I/O
bracket to the circuit board. Replace the original I/O bracket with enclosed EK FC580
DCII I/O bracket and install it using the original screws.
Installation and mounting manual for
EK-FC580 DCII I/O bracket
Installation and mounting manual for
EK-FC580 DCII I/O bracket
This product is intended for installation only by expert users. Please consult with a qualified technician for
installation. Improper installation may result in damage to your equipment. EK Water Blocks assumes no
liability whatsoever, expressed or implied, for the use of these products, nor their installation.
This product is intended for installation only by expert users. Please consult with a qualified technician for
installation. Improper installation may result in damage to your equipment. EK Water Blocks assumes no
liability whatsoever, expressed or implied, for the use of these products, nor their installation.
STEP 1: REPLACE THE ORIGINAL I/O BRACKET
STEP 1: REPLACE THE ORIGINAL I/O BRACKET
Remove the two screws and four hexagonal nuts securing the original three-slot I/O
bracket to the circuit board. Replace the original I/O bracket with enclosed EK FC580
DCII I/O bracket and install it using the original screws.
Remove the two screws and four hexagonal nuts securing the original three-slot I/O
bracket to the circuit board. Replace the original I/O bracket with enclosed EK FC580
DCII I/O bracket and install it using the original screws.
Installation and mounting manual for
EK-FC580 DCII I/O bracket
Installation and mounting manual for
EK-FC580 DCII I/O bracket
This product is intended for installation only by expert users. Please consult with a qualified technician for
installation. Improper installation may result in damage to your equipment. EK Water Blocks assumes no
liability whatsoever, expressed or implied, for the use of these products, nor their installation.
This product is intended for installation only by expert users. Please consult with a qualified technician for
installation. Improper installation may result in damage to your equipment. EK Water Blocks assumes no
liability whatsoever, expressed or implied, for the use of these products, nor their installation.
STEP 1: REPLACE THE ORIGINAL I/O BRACKET
STEP 1: REPLACE THE ORIGINAL I/O BRACKET
Remove the two screws and four hexagonal nuts securing the original three-slot I/O
bracket to the circuit board. Replace the original I/O bracket with enclosed EK FC580
DCII I/O bracket and install it using the original screws.
Remove the two screws and four hexagonal nuts securing the original three-slot I/O
bracket to the circuit board. Replace the original I/O bracket with enclosed EK FC580
DCII I/O bracket and install it using the original screws.
ASUS factory I/O plate
ASUS factory I/O plate
EK-FC580 DCII
I/O plate
ASUS factory I/O plate
ASUS factory I/O plate
EK-FC580 DCII
I/O plate
ASUS factory I/O plate
ASUS factory I/O plate
EK-FC580 DCII
I/O plate
/