HP PhotoSmart MZ60 User manual

Type
User manual

This manual is also suitable for

6.5” x 9” FRONT COVER
HP Photosmart
Mz60 series
Digital Camera
User Guide
Legal and notice information
© Copyright 2007 Hewlett-Packard
Development Company, L.P.
The information contained herein is
subject to change without notice. The
only warranties for HP products and
services are set forth in the express
warranty statements accompanying
such products and services. Nothing
herein should be construed as
constituting an additional warranty.
HP shall not be liable for technical or
editorial errors or omissions contained
herein.
Windows® is a U.S. registered
trademark of Microsoft Corporation.
SD Logo is a trademark of its
proprietor.
Contents
1 Getting started
Camera top and back ................................................................................................................3
Camera front, side, and bottom..................................................................................................4
Before taking pictures.................................................................................................................4
Install the batteries...............................................................................................................4
Turn on the camera..............................................................................................................4
Choose the language...........................................................................................................5
Set the region.......................................................................................................................5
Set the date and time...........................................................................................................5
Install and format an optional memory card.........................................................................6
Install the software................................................................................................................6
Using your camera......................................................................................................................7
2 Taking pictures and recording video clips
Taking pictures...........................................................................................................................8
Recording video clips.................................................................................................................9
Instant Review............................................................................................................................9
Auto focus and exposure............................................................................................................9
Focusing on the subject......................................................................................................10
Optimizing focus.................................................................................................................10
Using Focus Lock...............................................................................................................11
Optimizing exposure...........................................................................................................11
Using zoom...............................................................................................................................11
Optical zoom.......................................................................................................................12
Digital zoom........................................................................................................................12
3 Setting options for taking pictures and recording video clips
Setting the flash........................................................................................................................13
Flash Setting—Red-Eye.....................................................................................................13
Using the Picture Capture and Video Record menus...............................................................14
Using the Self-Timer setting...............................................................................................15
Using the Burst setting.......................................................................................................15
4 Reviewing images and video clips
Deleting images........................................................................................................................18
Viewing thumbnails...................................................................................................................18
Magnifying images....................................................................................................................18
Using the Playback Menu.........................................................................................................18
Removing red eyes.............................................................................................................19
Tagging images as Favorites.............................................................................................19
Viewing slideshows............................................................................................................20
5 Using the Design Gallery Menu
Modifying colors........................................................................................................................21
Adding borders.........................................................................................................................21
Cropping images......................................................................................................................22
1
6 Transferring and printing images
Transferring images with HP Photosmart Software..................................................................23
Transferring images without HP Photosmart Software.............................................................24
Connecting to the computer...............................................................................................24
Using a memory card reader..............................................................................................25
Printing images directly to a printer..........................................................................................25
7 Using HP Photosmart Express
Using the Photosmart Express Menu.......................................................................................27
Marking images for printing......................................................................................................27
Buying prints online..................................................................................................................29
Sharing images.........................................................................................................................29
Setting up online destinations in the camera......................................................................29
Sending images to online destinations...............................................................................30
8 Using the Camera Setup Menu..............................................................................................31
9 Troubleshooting
Resetting the camera...............................................................................................................32
Problems and solutions............................................................................................................32
Camera error messages...........................................................................................................37
10 Product support
Helpful websites.......................................................................................................................38
Getting assistance....................................................................................................................38
A Managing batteries
Top points about batteries........................................................................................................39
Extending battery life................................................................................................................39
Safety precautions for using batteries......................................................................................39
Power indicators.......................................................................................................................40
Battery performance.................................................................................................................40
Recharging NiMH batteries......................................................................................................41
B Specifications
Memory capacity.......................................................................................................................43
Image quality............................................................................................................................43
Index..............................................................................................................................................44
2
1 Getting started
Use this section to get familiar with camera controls, set up your digital camera for use,
and begin taking pictures.
Camera top and back
8
9
11 10
7
12
321
4 5 6
1 Power light.
2
button.
3 Shutter button.
4
Delete button—Accesses the Delete function while in Instant Review (see Instant
Review” on page 9) and Playback (see Deleting images” on page 18).
5
Flash button— Accesses the flash settings while in Picture Capture (see Setting
the flash” on page 13).
6
selector—Switches between Picture Capture, Video Record, and
Playback (see Taking pictures” on page 8, Recording video clips” on page 9,
and Reviewing images and video clips” on page 17).
7
Zoom lever—Accesses / Zoom (see Using zoom” on page 11), Thumbnails
(see
Viewing thumbnails” on page 18), and Magnify (see Magnifying images”
on page 18) functions.
8
and buttons—Scroll through menus and images.
9 USB connector.
10
button—Displays camera menus, selects options, and confirms actions.
11
Back button—Returns you to the previous menu or view. Press and hold to back out of
all menus.
12 Image Display.
Getting started 3
Camera front, side, and bottom
2
3
5
4
1
1 Flash.
2 Self-Timer light (see Using the Self-Timer setting” on page 15).
3 Microphone.
4 Tripod mount.
5 Battery/Memory Card door.
Before taking pictures
Complete the following procedures before taking pictures or recording video clips.
Install the batteries
1. Open the Battery/Memory Card door by sliding
the latch as indicated on the Battery/Memory
Card door.
2. Insert the two AA batteries.
3. Close the Battery/Memory Card door.
NOTE: If using rechargeable NiMH batteries,
fully charge the batteries before using them the
first time (see
Recharging NiMH batteries”
on page 41). Turn off the camera before
removing the batteries.
Turn on the camera
To turn on the camera, press the button.
Chapter 1
4 Getting started
Choose the language
Use to choose the language you want, then
press
.
To change the language later, use the
Camera
Setup Menu (see
Using the Camera Setup Menu”
on page 31).
Set the region
Along with the language setting, the region setting
determines the default date format.
Use
to choose the region you want, then press
.
Set the date and time
Accurately setting the date and time will help you locate images once you have transferred
them to your computer, and will ensure that images are accurately marked if you use the
date and time imprint feature. See Date & Time Imprint under
Using the Picture Capture
and Video Record menus” on page 14.
1.
Use
to adjust the highlighted value.
2. Use
to move to the other selections and
repeat Step 1 until the date and time are set
correctly.
3.
Press
when the date, time, and format
settings are correct, then press
again to
confirm.
To change the date and time later, use the
Camera
Setup Menu (see
Using the Camera Setup Menu” on page 31).
Before taking pictures 5
Install and format an optional memory card
This camera supports standard, high speed, and high capacity Secure Digital (SD and
SDHC) memory cards, 32MB to 8GB.
1. Turn off the camera and open the
Battery/Memory Card door.
2. Insert the memory card in the
smaller slot as shown. Make sure
the memory card snaps into
place.
3. Close the Battery/Memory Card
door and turn on the camera.
NOTE: When you turn on your
camera with a memory card
installed, the camera indicates
the number of images you can
store on the memory card at the
current
Image Quality
setting. This camera supports
storing a maximum of 2000
images on a memory card.
Always format new memory cards before first use. Formatting removes all images from
the memory card, so make sure to transfer existing images before formatting (see
Transferring and printing images” on page 23).
1. With the camera turned on, slide
to .
2.
Press
.
3.
Use
to select Format Card, then press .
4.
Use
to select Yes, then press to format the card.
NOTE: Once you install a memory card, all new images and video clips are stored
on the card, rather than in internal memory. To use internal memory and view images
stored there, turn off the camera then remove the memory card. To transfer images
from internal memory to an optional memory card, see Move Images to Card
under
Using the Playback Menu” on page 18.
For information about supported memory cards, see Storage” on page 42.
Install the software
The HP Photosmart Software provides features for transferring images and video clips
to your computer, as well as features for modifying stored images (remove red eyes,
rotate, crop, resize, and more).
To install the HP Photosmart Software, your computer must meet the system
requirements as stated on the camera packaging.
If you have trouble installing or using the HP Photosmart Software, see the Hewlett-
Packard Technical Support website for more information:
www.hp.com/support. Known
issues are often fixed with new releases of firmware. To optimize your digital photography
experience, periodically check this website for updates to your camera's firmware,
software, and drivers.
Chapter 1
6 Getting started
To learn about Windows Vista support for your camera, see www.hp.com/go/
windowsvista (English only).
Windows:
1. Close all programs and temporarily disable any virus protection software.
2. Insert the HP Photosmart Software CD into the CD drive and follow the on-screen
instructions. If the installation screen does not appear, click Start, click Run, type D:
\Setup.exe, where D is the letter of your CD drive, then click OK.
3. When the software has finished installing, re-enable virus protection software.
Macintosh:
1. Insert the HP Photosmart Software CD into the CD drive.
2. Double-click the CD icon on the computer desktop.
3. Double-click the installer icon, then follow the on-screen instructions.
Once installation is complete and you have restarted your computer, System
Preferences automatically opens to the HP Photosmart Camera settings. You may
change settings so the HP Photosmart Software starts automatically when you connect
your camera to your Macintosh (click the help button on the HP Photosmart Camera
settings dialog for more information).
Using your camera
Now that you’ve completed setup, you can take and review pictures and video clips.
For information on taking pictures and recording
video clips
See Taking pictures” on page 8 and
Recording video clips” on page 9
For information on setting picture capture and
video record settings
See Setting options for taking pictures and
recording video clips” on page 13
For information on reviewing images and video
clips on the camera
See Reviewing images and video clips”
on page 17
For information on enhancing your images See Using the Design Gallery Menu”
on page 21
For information on transferring images from
your camera to a computer
See Transferring images with HP Photosmart
Software” on page 23
For information on printing images See Printing images directly to a printer”
on page 25
TIP: To switch between Picture Capture, Video Record, and
Playback, slide to the desired option.
Using your camera 7
2 Taking pictures and recording
video clips
You can take pictures when you are in Picture Capture and you can record video
when you are in
Video Record. Slide to to take pictures or to to record
video clips. The Image Display resembles the following:
1
Picture Capture indicator.
Video Record indicator.
2 12
0:15
When taking pictures, pictures remaining count.
When recording video clips, time remaining, in minutes and seconds (or
in hours, minutes, and seconds if you have a large capacity memory
card).
3 Battery level indicator (see Power indicators” on page 40).
4 Memory card indicator.
5 Focus brackets (see Auto focus and exposure” on page 9).
Taking pictures
You can take a picture when the camera is set to Picture Capture.
1. Slide
to .
2. Frame the subject for your picture in the Image Display.
3. Press the Shutter button halfway down to measure and
lock the focus and exposure. The focus brackets in the
Image Display turn solid green when focus is locked
(see
Auto focus and exposure” on page 9).
4. Press the Shutter button all the way down to take the
picture.
8 Taking pictures and recording video clips
Recording video clips
You can record a video clip when the camera is set to Video Record.
1. Slide
to .
2. Frame the subject in the Image Display.
3. Press the Shutter button halfway down to measure focus
and exposure. The focus brackets in the Image Display
turn solid green when focus is locked (see
Auto focus
and exposure” on page 9).
4. Press the Shutter button all the way down and release to
begin recording video.
5. To stop recording video, press and release the Shutter
button again.
Instant Review
After you have taken a picture or recorded a video clip, the camera displays it briefly in
Instant Review. If you want to delete the image or video clip, press
, select This
Image from the
Delete menu, then press .
NOTE: To hear audio associated with video clips, transfer them to your computer
(see
Transferring and printing images” on page 23).
Auto focus and exposure
When you press the Shutter button halfway down, the camera automatically measures
and locks the focus (for pictures and video clips) and exposure (for pictures only). When
you auto focus:
Indicator Description
Green focus brackets Focus found.
Red focus brackets Focus not found (see Optimizing focus” on page 10).
(shaking hand icon)
(Pictures only) Long exposure required (see Optimizing
exposure” on page 11).
TIP: If you follow the suggestions for focus and exposure and your image does not
appear to be in proper focus or exposure when viewed in
Playback, see the topics
on blurry, dark, light, or grainy images in
Troubleshooting” on page 32.
Recording video clips 9
Focusing on the subject
When you press the Shutter button halfway down,
the camera searches for focus within the focus
brackets. When it finds focus, the focus brackets turn
green.
If the focus brackets do not frame your subject, use
Focus Lock (see
Using Focus Lock”
on page 11).
Optimizing focus
When the camera cannot auto focus, the focus brackets turn red. This indicates the
picture may be out of focus because the subject is out of the focus range or the scene
has low contrast.
If you are recording a video or taking a picture with a shooting mode (see
Using the
Picture Capture and Video Record menus” on page 14) other than Close-up or
Super Close-up, and the camera cannot focus, it will still take the picture. Try
releasing the Shutter button, reframing, and then pressing the Shutter button halfway
down again. If the focus brackets are still red, try the following.
For pictures and video clips: If the scene has low contrast, use Focus Lock (see
Using Focus Lock” on page 11) and aim at a point on the subject that has more colors
or crisp edges.
For pictures only:
Select a shooting mode more appropriate for the scene you are capturing (see
Shooting Mode under
Using the Picture Capture and Video Record menus”
on page 14).
If the subject is too close (less than 300 mm or 11.81 in), move farther away from the
subject or use
Close-up or Super Close-up (see Close-up and Super Close-
up under
Using the Picture Capture and Video Record menus” on page 14).
If the camera is set to
Close-up or Super Close-up and cannot focus, the
camera will not take the picture. Try one of the following:
Move within the
Close-up range (200-800 mm or 7.87-31.5 in) or Super
Close-up range (20-200 mm or 0.79–7.87 in) or set the camera to
Auto
(see Auto under
Using the Picture Capture and Video Record menus”
on page 14).
In low contrast scenes, use Focus Lock (see
Using Focus Lock”
on page 11).
Chapter 2
10 Taking pictures and recording video clips
Using Focus Lock
Use Focus Lock to focus on a subject that is not in the center of the picture, to capture
action shots more quickly by pre-focusing in the area where the action will occur, or to
focus in low light or low contrast situations.
1. Frame the subject for your picture within the focus
brackets. In low light or low contrast situations,
frame a brighter or higher contrast object.
2. Press the Shutter button halfway down.
3. Hold the Shutter button halfway down and re-
frame.
4. Press the Shutter button all the way down to take
the picture.
Optimizing exposure
When you are taking a picture and press the Shutter button halfway down, the camera
also measures the light level to set the proper exposure.
If the camera determines the scene will require a very long exposure, a shaking hand
icon (
) appears. The camera will take the picture, but it may be blurry because it is
difficult to hold the camera still for the length of time required. Try one of the following:
Set the flash to
Auto Flash or Flash On (see Setting the flash” on page 13).
Set the camera on a tripod or stable surface.
If the subject is out of the flash range or you do not have a tripod, set the shooting
mode to
Steady Photo (see Steady Photo under Using the Picture Capture
and Video Record menus” on page 14).
Turn on more light.
NOTE: When you are recording a video, the camera continuously updates exposure.
Using zoom
Your camera has both optical and digital zoom. Optical zoom physically extends the lens
to make the subject of your picture appear closer. After you have extended the lens fully
using optical zoom, the camera employs digital zoom. Digital zoom uses no moving lens
parts.
TIP: The more you zoom in on the subject of your picture, the more small movements
of the camera are magnified (this is called camera shake). If
appears when you
press the Shutter button halfway down, the picture may be blurry. To reduce potential
blur, see the suggestions in
Optimizing exposure” on page 11).
Using zoom 11
Optical zoom
Optical zoom moves the lens between wide angle (1x) and telephoto (6x).
While in
Picture Capture or Video Record, use the
buttons on the Zoom lever to control zoom. Press
to zoom in
and
to zoom out.
NOTE: You can set the optical zoom to the position you want
just before recording video clips. However, you cannot use
optical zoom while the video clip is recording.
Digital zoom
In digital zoom, the Image Display shows a yellow frame around the scene and the image
quality setting (MP value). As you zoom in, the scene expands to show what the camera
will capture, and the MP value decreases to indicate the resolution at which the scene
will be captured.
When capturing images using digital zoom, make sure that the MP value on the Image
Display is appropriate for the size at which you want to print the captured image. For MP
values and their recommended print sizes, see Image Quality under
Using the Picture
Capture and Video Record menus” on page 14.
To use digital zoom:
1. While in
Picture Capture, press on the Zoom lever to optically zoom to the
maximum level, then release the lever.
2. Press and hold
until the image you want to capture fills the yellow frame. If you
zoom in too far, press
.
3. To return to optical zoom, press
.
NOTE: Digital zoom is not available when recording video clips.
Chapter 2
12 Taking pictures and recording video clips
3 Setting options for taking
pictures and recording video
clips
Your camera's default settings work well for most shooting situations. For some
situations, however, the features described in this chapter can improve the pictures you
take and the video clips you record. In addition to setting features that optimize the camera
for lighting and motion, you can also set the camera to take a series of pictures rapidly
or take images 10 seconds after you press the Shutter button, giving you time to place
yourself in the image.
Setting the flash
To select a flash setting, press while in Picture Capture, use to highlight the
desired flash mode, then press
. To exit without changing the flash setting,
press
.
Auto Flash (Default)—The camera uses the flash if necessary.
Red-Eye—The camera uses the flash with red-eye reduction, if necessary, to minimize
the possibility of human eyes appearing red in the final image. For information about
red-eye, see
Flash Setting—Red-Eyeon page 13.
Flash On—The camera always uses flash. If the light is behind your subject, use this
setting to increase the light on the front of your subject.
Flash Off—The camera does not use flash. Use this setting to capture poorly lit subjects
beyond the flash range or to capture scenes with the existing light.
The flash setting remains in effect until it is changed again, or you turn off the camera.
NOTE: The flash is set to Flash Off in Landscape, Sunset, and
Theatre shooting modes, with the Burst setting, and while recording video
clips. The flash is set to
Red-Eye in Night Portrait shooting mode.
Flash Setting—Red-Eye
The red-eye phenomenon is caused when light from the flash reflects off the subjects'
eyes, which can make human eyes appear red in the captured image. Using
Red-
Eye causes the camera to flash quickly up to three times to shrink the subject's pupils
(reducing the effect of the red-eye phenomenon) before using the main flash and
capturing the image. Since it takes longer to take a picture using this setting, make sure
your subjects wait for the additional flashes.
Setting options for taking pictures and recording video clips 13
Using the Picture Capture and Video Record menus
The Picture Capture and Video Record menus allow you to adjust camera
settings that affect the characteristics of the pictures and video clips you capture. The
Picture Capture Menu displays only those features available for taking pictures while
the
Video Record Menu displays only features available for recording video clips.
1.
Slide
to or , then press .
2.
Use
to highlight an option, then press to display the option’s menu.
3.
Use
to highlight a setting, then press to change the setting or press to
exit without changing the setting.
4. To exit the menu, hold down
until the menu disappears.
For on-camera information about an option, use
to highlight Help... in the option's
menu, then press
.
Shooting Mode ( only)—For selecting a predefined setting optimized for particular
types of scenes or shooting situations. The setting remains in effect until it is changed
again, or until you turn off the camera.
Auto Mode (Default)—For taking good shots quickly, when you do not have
time to select a special shooting mode.
Close-up—For taking close-up pictures of subjects between 200 and 800 mm
(7.87 to 31.5 in) away.
Super Close-up—For taking very close-up pictures of subjects between 20 and
200 mm (0.79 to 7.87 in) away.
Steady Photo—For minimizing picture blur when the subject is moving or you
cannot hold the camera still long enough in moderate to dim light conditions (see
Optimizing exposure” on page 11).
Theatre—For capturing images at school programs, concerts, or indoor sporting
events without using flash.
Landscape—For scenes with deep perspective, such as mountain scenes.
Portrait—For pictures that have one or more people as their primary subject.
Action—For capturing sporting events, moving cars, or any scene where you
want to stop the action.
Night PortraitFor capturing images of people at night. This mode uses the
flash and a long exposure. As a result, you must set the camera on a tripod or stable
surface.
Sunset—For capturing outdoor scenes at sunset.
Self-Timer—For capturing images or recording video after a 10-second delay (see
Using the Self-Timer setting” on page 15).
Image Quality ( only)—Sets resolution and compression for images. The greater the
number, the higher the resolution. The setting remains in effect until it is changed, even
when you turn off the camera.
8MP Best—For enlarging or printing images greater than 41 x 51 cm (16 x 20 in).
Normal (8MP) (Default)—For printing images up to 41 x 51 cm (16 x 20 in).
5MP—For printing images up to 28 x 36 cm (11 by 14 in).
2MP—For printing images up to 13 x 18 cm (5 by 7 in).
VGA—For sending images via e-mail or posting them to the Internet.
Burst ( only)—For taking up to three shots quickly in succession (see Using the
Burst setting” on page 15). The setting remains in effect until it is changed again, or
until you turn off the camera.
Chapter 3
14 Setting options for taking pictures and recording video clips
Date & Time Imprint ( only)—Imprints date in lower left corner of image. The setting
remains in effect until it is changed, even when you turn off the camera.
Off (Default)—No date or time imprinted on the image.
Date Only—Date permanently imprinted.
Date & Time—Date and time permanently imprinted.
Camera Setup...—Displays the Camera Setup Menu for setting camera behavior
(see Using the Camera Setup Menu” on page 31).
Camera Help...—Displays a list of help topics for commonly used features.
NOTE: Some menu options are not available in certain shooting modes.
Using the Self-Timer setting
The Self-Timer allows you to take an image or video clip 10 seconds after pressing
the Shutter button.
1.
While in the
Picture Capture or Video Record menu, use to highlight
Self-Timer, press , highlight On, press , then hold down until the menu
disappears.
2. Set the camera on a tripod or stable surface.
3. Frame the subject in the Image Display.
4. Press the Shutter button halfway down to lock focus and exposure. When the focus
brackets turn green, press the Shutter button all the way down. The camera begins
the 10-second countdown, then takes the picture or begins recording the video clip.
5. If you are recording a video clip, press the Shutter button to stop recording.
TIP: If you want to include yourself in the picture, place the camera on a tripod or
stable surface, then press the Shutter button all the way down. The camera locks
focus and exposure just before the end of the countdown, allowing you time to place
yourself in the scene.
The Self-Timer setting resets to Off after the image is taken.
Using the Burst setting
Burst allows you to take up to three pictures as quickly as possible when you press
and hold the Shutter button all the way down.
1.
While in the
Picture Capture Menu, use to highlight Burst , press
, highlight On, press , then hold down until the menu disappears.
2. Frame the subject, then press the Shutter button halfway down to lock the focus and
exposure. Then press the Shutter button all the way down and hold it. The camera
takes up to three pictures as quickly as possible until you release the Shutter button
or the camera runs out of memory.
The Image Display remains off during the burst capture. After the burst images have been
taken, each image appears one at a time in Instant Review (see
Instant Review”
on page 9). You can delete the entire burst sequence in Instant Review. To delete
individual images, see
Deleting images” on page 18.
(continued)
Using the Picture Capture and Video Record menus 15
The Burst setting remains in effect until it is changed again, or until you turn off the
camera.
Chapter 3
16 Setting options for taking pictures and recording video clips
4 Reviewing images and video
clips
You can review and manipulate images and video clips in Playback as described
here. For information about enhancing images, see
Using the Design Gallery Menu”
on page 21.
1. Slide
to .
2. Use
to scroll through your images and video clips.
Press
to view video clips; press to pause a clip. When paused, use to scroll
through the individual frames; press
to resume playing the video.
During
Playback, the Image Display also indicates additional information about each
image or video clip.
1 Playback indicator.
2 Battery indicator (see Power indicators” on page 40).
3 Memory card indicator.
4 1 of 30 Number of this image or video clip out of the total number of stored
images and video clips.
5 Image tagged as Favorite (see Tagging images as Favorites”
on page 19).
6 Image marked for printing via an online printing service (see Buying
prints online” on page 29).
7
1
Number of electronic Photosmart Share destinations (see Using
HP Photosmart Express” on page 27).
8
3
Number of copies to print (see Transferring and printing images”
on page 23).
Reviewing images and video clips 17
Deleting images
To delete a displayed image during Playback:
1.
Press
.
2.
Use
to select an option, then press .
This Image—Deletes the image or video clip.
All Except Favorites—Deletes all images except those tagged as Favorites.
This menu option only appears if you have images tagged as Favorites (see
Tagging images as Favorites” on page 19).
All Images (in Memory/on Card)—Deletes all stored images and video clips.
Format (Memory/Card)—Deletes all stored files, then formats the internal
memory or memory card.
Viewing thumbnails
1.
While in
Playback, press (same as Zoom Out on the Zoom lever).
2.
Use
and to scroll through the
thumbnails.
3.
Press
to view the highlighted image on the
Image Display.
Magnifying images
This feature is for viewing purposes only; it does not permanently alter the image.
1.
While in
Playback, press (same as Zoom In on the Zoom lever). The currently
displayed image is magnified 2x.
2.
Use
and to pan around the magnified
image.
3.
Use
and to change the magnification.
4.
Press
to return to Playback.
Using the Playback Menu
1.
While in
Playback, press .
2.
Use
to highlight an option.
Chapter 4
18 Reviewing images and video clips
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48

HP PhotoSmart MZ60 User manual

Type
User manual
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI