Sharp R930 User manual

Category
Webcams
Type
User manual
6.5” x 9” FRONT COVER
HP Photosmart
R930 series
Digital Camera
User Guide
Legal and notice information
© Copyright 2007 Hewlett-Packard
Development Company, L.P.
The information contained herein is
subject to change without notice. The
only warranties for HP products and
services are set forth in the express
warranty statements accompanying
such products and services. Nothing
herein should be construed as
constituting an additional warranty. HP
shall not be liable for technical or
editorial errors or omissions contained
herein.
Windows® is a U.S. registered
trademark of Microsoft Corporation.
SD Logo is a trademark of its
proprietor.
Contents
1 Getting started
Camera top, side, and back .......................................................................................................4
Camera front and bottom............................................................................................................5
Before taking pictures.................................................................................................................5
Install the battery..................................................................................................................5
Charge the battery................................................................................................................6
Turn on the camera..............................................................................................................6
Choose the language...........................................................................................................6
Set the region.......................................................................................................................6
Set the date and time...........................................................................................................7
Install and format an optional memory card.........................................................................7
Install the software................................................................................................................8
Using your camera......................................................................................................................8
Using the Touch Screen interface........................................................................................8
Related information....................................................................................................................9
2 Taking pictures and recording video clips
Taking pictures.........................................................................................................................12
Recording video clips...............................................................................................................12
Instant Review..........................................................................................................................12
Auto focus and exposure..........................................................................................................12
Optimizing focus.................................................................................................................13
Using Focus Lock...............................................................................................................13
Optimizing exposure...........................................................................................................14
Using zoom...............................................................................................................................14
Optical zoom.......................................................................................................................14
Digital zoom........................................................................................................................15
3 Setting options for taking pictures and recording video clips
Setting the flash........................................................................................................................16
Red eye..............................................................................................................................16
Using the shooting modes........................................................................................................17
Using Panorama mode.......................................................................................................17
Using the Picture Capture and Video Record menus...............................................................18
Using the Self-Timer settings..............................................................................................21
Using the Burst setting.......................................................................................................21
Steady Photo......................................................................................................................21
Adaptive Lighting................................................................................................................22
Exposure Compensation....................................................................................................22
White Balance.....................................................................................................................22
ISO speed...........................................................................................................................22
1
4 Reviewing images and video clips
Using Playback.........................................................................................................................24
Reviewing videos................................................................................................................25
Deleting images..................................................................................................................25
Viewing thumbnails.............................................................................................................26
Magnifying images..............................................................................................................26
Using the Playback Menu.........................................................................................................26
Viewing slideshows............................................................................................................27
Tagging images .................................................................................................................27
Stitching panoramas...........................................................................................................29
5 Using the Design Gallery Menu
Removing red eyes...................................................................................................................30
Rotating images........................................................................................................................31
Applying artistic effects.............................................................................................................31
Enhancing photos.....................................................................................................................31
Modifying colors........................................................................................................................32
Adding borders.........................................................................................................................32
Cropping images......................................................................................................................33
6 Transferring and printing images
Transferring images with HP Photosmart Software..................................................................34
Transferring images without HP Photosmart Software.............................................................35
Connecting to the computer...............................................................................................35
Using a memory card reader..............................................................................................36
Printing directly to a printer.......................................................................................................36
7 Using HP Photosmart Express
Using the Photosmart Express Menu.......................................................................................38
Marking images for printing......................................................................................................39
Buying prints online..................................................................................................................39
Sharing images.........................................................................................................................40
Setting up online destinations in the camera......................................................................40
Sending images to online destinations...............................................................................41
8 Using the Camera Setup Menu
Setting Remembered Settings..................................................................................................43
Modifying Date and Time..........................................................................................................43
9 Troubleshooting
Resetting the camera...............................................................................................................44
Aligning the Touch Screen.......................................................................................................44
Caring for the Touch Screen....................................................................................................44
Problems and solutions............................................................................................................45
Camera error messages...........................................................................................................51
10 Product support
Helpful websites.......................................................................................................................52
Getting assistance....................................................................................................................52
A Managing batteries
Top points about batteries........................................................................................................54
Extending battery life................................................................................................................54
2
Safety precautions for using batteries......................................................................................54
Power indicators.......................................................................................................................55
Number of shots per battery charge.........................................................................................55
Recharging the Lithium Ion battery...........................................................................................55
Safety precautions for recharging batteries..............................................................................56
B Specifications
Memory capacity.......................................................................................................................58
Image quality............................................................................................................................58
Video quality.............................................................................................................................59
Index..............................................................................................................................................60
Contents
3
1 Getting started
Use this section to get familiar with the camera controls, set up your digital camera for
use, and begin taking pictures.
Camera top, side, and back
3 5
1 2
6
7
8
9
10
11
4
1 Speaker.
2
button
3 Power light.
4
selector—Switches between Picture Capture, Video Record, and
Playback (see Taking pictures” on page 12, Recording video clips” on page 12,
and Reviewing images and video clips” on page 24).
5 Shutter button.
6
Zoom lever—Accesses / Zoom (see Using zoom” on page 14), Thumbnails
(see
Viewing thumbnails” on page 26), and Magnify (see Magnifying images”
on page 26) functions.
7 USB connector.
8 Battery Charging light.
9
button—Turns the Touch Screen Image Display overlay on and off (see Using the
Touch Screen interface” on page 8).
10 Stylus (see Using the Touch Screen interface” on page 8).
11
Touch Screen Image Display— Frames images when in Picture Capture or Video
Record, reviews images when in
Playback, and provides a Touch Screen interface for
camera operations (see
Using the Touch Screen interface” on page 8).
4 Getting started
Camera front and bottom
1 32
5 4
1 Flash.
2 Self-Timer/Focus Assist light—See Using the Self-Timer settings” on page 21.
3 Microphone.
4 Battery/Memory Card door.
5 Tripod mount.
Before taking pictures
Complete the following procedures before taking pictures or recording video clips.
Install the battery
1. Open the Battery/Memory Card door
by sliding the door latch as indicated
on the Battery/Memory Card door.
2. Insert the battery in the larger slot,
pushing the battery in until the latch
catches.
3. Close the Battery/Memory Card
door.
To remove the battery, move the battery
latch until the battery springs free.
NOTE: Fully charge the battery
before using it the first time (see
Charge the battery” on page 6).
Turn off the camera before removing
the battery.
Camera front and bottom 5
Charge the battery
To charge the battery in the camera:
1. Plug the small end of the USB
cable into the camera and the
large end into the power
adapter, then plug the power
adapter into an electrical
outlet, as shown.
The camera's blinking Battery
Charging light indicates that
the battery is charging. The
battery is fully charged when
the Battery Charging light turns on solid (see
Recharging the Lithium Ion battery”
on page 55 for information on charging times).
2. When charging is complete, disconnect the camera from the power adapter.
NOTE: For other methods for recharging the battery, see Recharging the Lithium
Ion battery” on page 55.
Turn on the camera
To turn on the camera, press the button.
Choose the language
1. Using your finger or the stylus, touch the language you want.
2. Touch Next on the language confirmation screen
to confirm your choice and display the
Region screen.
To change the language later, use the
Camera
Setup Menu (see
Using the Camera Setup Menu”
on page 42).
Set the region
Along with the language setting, the region setting determines the default date format.
1. Touch the region you want.
2. Touch Next on the region confirmation screen to
confirm your choice and display the
Date
screen.
Chapter 1
6 Getting started
Set the date and time
Accurately setting the date and time will help you locate images once you have transferred
them to your computer, and will ensure that images are accurately marked if you use the
date and time imprint feature. See Date & Time Imprint under
Using the Picture Capture
and Video Record menus” on page 18.
1.
Touch
or to adjust the month, date, and
year.
2. Touch Next to confirm your settings and display
the
Time screen.
3.
Touch
or to adjust the time.
4. When all settings are correct, touch Done.
To change the date and time later, use the
Camera
Setup Menu (see
Using the Camera Setup Menu”
on page 42).
Install and format an optional memory card
This camera supports standard, high speed, and high capacity Secure Digital (SD and
SDHC) memory cards, 32MB to 8GB.
1. Turn off the camera and open the
Battery/Memory Card door.
2. Insert the optional memory card in the
smaller slot as shown. Make sure the
memory card snaps into place.
3. Close the Battery/Memory Card door
and turn on the camera.
NOTE: When you turn on your camera
with a memory card installed, the
camera indicates the number of picture
and video images you can store on the
memory card at the current
Image
Quality setting. This camera supports
storing a maximum of 1999 images on a
memory card.
Always format new memory cards before first use. Formatting removes all images from
the memory card, so make sure to transfer existing images before formatting (see
Transferring and printing images” on page 34).
1. With the camera turned on, slide
to .
2.
Touch
.
3. Touch
to display Format Card, then touch Format Card.
4. Touch Yes to format the card.
NOTE: Once you install a memory card, all new images and video clips are stored
on the card, rather than in internal memory. To use internal memory and view images
stored there, remove the memory card. To transfer images from internal memory to
an optional memory card, see Move Images to Card under
Using the Playback
Menu” on page 26.
Before taking pictures 7
For information about supported memory cards, see Storage under Specifications”
on page 57.
Install the software
The HP Photosmart Software provides features for transferring images and video clips
to your computer, as well as features for modifying stored images (remove red eyes,
rotate, crop, resize, and more).
To install the HP Photosmart Software, your computer must meet the system
requirements as stated on the camera packaging.
If you have trouble installing or using the HP Photosmart Software, see the Hewlett-
Packard Technical Support website for more information:
www.hp.com/support. Known
issues are often fixed with new releases of firmware. To optimize your digital photography
experience, periodically check this website for updates to your camera's firmware,
software, and drivers.
To learn about Windows Vista support for your camera, see
www.hp.com/go/
windowsvista (English only).
Windows:
1. Close all programs and temporarily disable any virus protection software.
2. Insert the HP Photosmart Software CD into the CD drive and follow the on-screen
instructions. If the installation screen does not appear, click Start, click Run, type D:
\Setup.exe, where D is the letter of your CD drive, then click OK.
3. When the software has finished installing, re-enable virus protection software.
Macintosh:
1. Insert the HP Photosmart Software CD into the CD drive.
2. Double-click the CD icon on the computer desktop.
3. Double-click the installer icon, then follow the on-screen instructions.
Once installation is complete and you have restarted your computer, System
Preferences automatically opens to the HP Photosmart Camera settings. You may
change settings so the HP Photosmart Software starts automatically when you connect
your camera to your Macintosh (click the help button on the HP Photosmart Camera
settings dialog for more information).
Using your camera
Use the information in this section to familiarize yourself with your camera's innovative
Touch Screen interface and get started taking and reviewing pictures and video clips.
Using the Touch Screen interface
This camera features a Touch Screen interface that allows you to access camera menus
and many camera features.
Chapter 1
8 Getting started
To use the Touch Screen:
Touch a rounded-corner touch button (as
shown) or menu item on the Touch
Screen. For example, touching
exits
the current screen or menu.
Whenever you are framing an image or
video clip, you can turn off the Touch
Screen overlay to view the display more
clearly. Press
to turn off the touch
buttons. Press
again to turn on the
touch buttons.
NOTE: Overlay items on the Touch Screen vary based on the task you are
performing.
Tips on using the Touch Screen:
You can use your finger or the stylus (shown above) to make Touch Screen
selections. If you do not want to smudge the Touch Screen, use the stylus (see
Caring for the Touch Screen” on page 44).
For best results, touch the center of the selection.
If touches have no affect or have unexpected results, try using the stylus. If, after
repeated use, stylus touches have no effect or have unexpected results, you may
need to align the Touch Screen (see
Aligning the Touch Screen” on page 44).
NOTE: This camera also features a virtual keyboard (via the Touch Screen interface)
which you can use to create image tags and e-mail addresses (see
Using the
keyboard” on page 28).
Related information
Once you have completed the camera setup tasks (see Before taking pictures”
on page 5), you can take and review pictures and video clips.
For information on taking pictures and recording
video clips
See Taking pictures” on page 12 and
Recording video clips” on page 12.
For information on setting picture capture and
video record options
See Setting options for taking pictures and
recording video clips” on page 16.
For information on reviewing and tagging
images and video clips on the camera
See Reviewing images and video clips”
on page 24.
For information on enhancing your images See Using the Design Gallery Menu”
on page 30.
For information on transferring images from
your camera to a computer
See Transferring images with HP Photosmart
Software” on page 34.
For information on printing images See Printing directly to a printer”
on page 36.
For information on setting up and sending
images to online destinations
See Sharing images” on page 40.
Related information 9
TIP: To switch between Picture Capture, Video Record, and
Playback, slide to the desired option.
Chapter 1
10 Getting started
2 Taking pictures and recording
video clips
You can take pictures when you are in Picture Capture and you can record video
when you are in
Video Record. Slide to to take pictures or to to record
video clips. The Image Display resembles the following:
1 Touch Screen buttons
Menu
When in Picture Capture, displays Picture Capture Menu.
When in Video Record, displays Video Record Menu.
( only) Displays the Shooting Mode menu. The icon that displays on
the button reflects the shooting mode you selected. For a list of shooting
modes and their icons, see
Using the shooting modes” on page 17.
( only) Displays the Flash Setting menu. The icon that displays on the
button reflects the flash setting you selected. For a list of flash settings and
their icons, see
Setting the flash” on page 16.
2 Status indicators
12 ( only) Pictures remaining count.
Picture Capture indicator.
Video Record indicator.
Memory card indicator.
Battery level indicator (see Power indicators” on page 55).
3 Focus brackets (see Auto focus and exposure” on page 12).
Whenever you set a camera feature to a setting other than the default, a button displays
with an icon indicating the setting. For example,
White Balance is Off by default and
no button displays. If you set
White Balance to Fluorescent, a button with the
icon
displays. When you touch that button, the White Balance menu displays,
allowing you to change the setting.
Taking pictures and recording video clips 11
For the icons you may see displayed on additional buttons, see the entries for camera
features in
Using the Picture Capture and Video Record menus” on page 18.
Taking pictures
You can take a picture when the camera is set to Picture Capture.
1. Slide
to .
2. Frame the subject for your picture in the Image Display.
3. Press the Shutter button halfway down to measure and
lock the focus and exposure. The focus brackets in the
Image Display turn solid green when focus is locked
(see
Auto focus and exposure” on page 12).
4. Press the Shutter button all the way down to take the
picture.
Recording video clips
You can record a video clip when the camera is set to Video Record.
1. Slide
to .
2. Frame the subject in the Image Display.
3. Press the Shutter button halfway down to measure focus
and exposure. The focus brackets in the Image Display
turn solid green when focus is locked (see
Auto focus
and exposure” on page 12).
4. Press the Shutter button all the way down and release to
begin recording video.
5. To stop recording video, press and release the Shutter button again.
Instant Review
After you have taken a picture or recorded a video clip, the camera displays it briefly in
Instant Review. If you want to delete the image or video clip, touch
, then touch This
Image in the
Delete menu. To exit Instant Review, touch .
Auto focus and exposure
When you press the Shutter button halfway down, the camera automatically measures
and locks the focus (for pictures and video clips) and exposure (for pictures only). When
you auto focus:
Indicator Description
Green focus brackets Focus found.
Red focus brackets Focus not found (see Optimizing focus” on page 13).
(shaking hand icon)
(Pictures only) Long exposure required (see Optimizing
exposure” on page 14).
Chapter 2
12 Taking pictures and recording video clips
TIP: If you follow the suggestions for focus and exposure and your image does not
appear to be in proper focus or exposure when viewed in
Playback, see the topics
on blurry, dark, light, or grainy images in
Troubleshooting” on page 44.
Optimizing focus
When the camera cannot auto focus, the focus brackets turn red. This indicates the
picture may be out of focus because the subject is out of the focus range or the scene
has low contrast.
If you are recording a video or taking a picture with a shooting mode (see
Using the
shooting modes” on page 17) other than Close-up and cannot focus, it will still take
the picture. Try releasing the Shutter button, reframing, and then pressing the Shutter
button halfway down again. If the focus brackets are still red:
For pictures and video clips: If the scene has low contrast, use Focus Lock (see
Using Focus Lock” on page 13) and aim at a point on the subject that has more colors
or crisp edges.
For pictures only:
Select a shooting mode more appropriate for the scene you are capturing (see
Using
the shooting modes” on page 17).
If the subject is too close (less than 100 mm or 3.94 in), move farther away from the
subject or use
Close-up (see Close-up under Using the shooting modes”
on page 17).
If the camera is set to
Close-up and cannot focus, the camera will not take the picture.
Try one of the following:
Move within the
Close-up range (100 mm to 1 m or 3.94 to 39.4 in) or set the
camera to
Auto (see Auto under Using the shooting modes” on page 17).
In low contrast scenes, use Focus Lock (see
Using Focus Lock” on page 13).
Using Focus Lock
Use Focus Lock to focus on a subject that is not in the center of the picture, to capture
action shots more quickly by pre-focusing in the area where the action will occur, or to
focus in low light or low contrast situations.
1. Frame the subject for your picture within the focus
brackets. In low light or low contrast situations,
frame a brighter or higher contrast object.
2. Press the Shutter button halfway down.
Auto focus and exposure 13
3. Hold the Shutter button halfway down and re-
frame.
4. Press the Shutter button all the way down to take
the picture.
Optimizing exposure
When you are taking a picture and press the Shutter button halfway down, the camera
also measures the light level to set the proper exposure.
If the camera determines the scene will require a very long exposure, a shaking hand
icon (
) appears. The camera will take the picture, but it may be blurry because it is
difficult to hold the camera still for the length of time required. Try one of the following:
Set the flash to
Auto Flash or Flash On (see Setting the flash” on page 16).
Set the camera on a tripod or stable surface.
If the subject is out of the flash range or you do not have a tripod, turn on
Steady
Photo (see Steady Photo under
Using the Picture Capture and Video Record
menus” on page 18).
Turn on more light.
NOTE: When you are recording a video, the camera continuously updates exposure.
Using zoom
Your camera has both optical and digital zoom. Optical zoom physically adjusts the lens
to make the subject of your picture appear closer. After you have zoomed the lens fully
using optical zoom, the camera employs digital zoom. Digital zoom uses no moving lens
parts.
TIP: The more you zoom in on the subject of your picture, the more small movements
of the camera are magnified (this is called camera shake). If
appears when you
press the Shutter button halfway down, the picture may be blurry. To reduce potential
blur, see the suggestions in
Optimizing exposure” on page 14.
Optical zoom
Optical zoom moves the lens between wide angle (1x) and telephoto (3x).
While in
Picture Capture or Video Record, use the
buttons on the Zoom lever to control zoom. Press
to zoom in
and
to zoom out.
Chapter 2
14 Taking pictures and recording video clips
Digital zoom
In digital zoom, the Image Display shows a yellow frame around the scene and the image
quality setting (MP value). As you zoom in, the scene enlarges within the yellow frame to
indicate the area of the scene the camera will capture, and the MP value decreases to
indicate the resolution at which the scene will be captured.
When capturing images using digital zoom, make sure that the MP value shown in the
Image Display is appropriate for the size at which you want to print the captured image.
For MP values and their recommended print sizes, see Image Quality under
Using the
Picture Capture and Video Record menus” on page 18.
To use digital zoom:
1. While in
Picture Capture, press on the Zoom lever to optically zoom to the
maximum level, then release the lever.
2. Press and hold
until the image you want to capture fills the yellow frame. If you
zoom in too far, press
.
3.
To return to optical zoom, press
until digital zooming stops. Release , then
press it again.
NOTE: Digital zoom is not available in / Panorama mode nor when recording
video clips.
Using zoom 15
3 Setting options for taking
pictures and recording video
clips
Your camera's default settings work well for most shooting situations. For some
situations, however, the features described in this chapter can improve the pictures you
take and the video clips you record. In addition to setting features that optimize the camera
for lighting and motion, you can also set the camera to create a panorama, to take a series
of pictures rapidly or take images 10 seconds after you press the Shutter button, giving
you time to place yourself in the image.
Setting the flash
To select a flash setting:
1. While in
Picture Capture, touch the icon corresponding to the current flash setting
(
by default).
2. Touch the flash setting you want, then touch OK. To exit the
Flash Setting menu
without changing the flash setting, touch
.
Auto Flash (Default)—The camera uses the flash, if necessary. The flash may cause a
phenomenon called red-eye (see Red eye” on page 16).
Flash On—The camera always uses flash. If the light is behind your subject, use this
setting to increase the light on the front of your subject. The flash may cause a
phenomenon called red-eye (see
Red eye” on page 16).
Flash Off—The camera does not use flash. Use this setting to capture poorly lit subjects
beyond the flash range or to capture scenes with the existing light.
The flash setting remains in effect until it is changed again, or you turn off the camera.
NOTE: The flash is set to Flash Off in Landscape, / Panorama,
Sunset, and Theatre shooting modes, with the Burst setting, and while
recording video clips. The flash is set to
Flash On in Night Portrait shooting
mode.
Red eye
The red-eye phenomenon is caused when light from the flash reflects off the subjects'
eyes, which can make human eyes appear red and animal's eyes appear to glow in the
captured image. You can remove the red eyes in human subjects after you have captured
the image, using either
Remove Red Eyes (see Removing red eyes”
on page 30) or the HP Photosmart Software that came with your camera. You can
remove the glowing eyes in animal subjects after you have captured the image using
Pet-Eye Fix (see
Enhancing photos” on page 31).
16 Setting options for taking pictures and recording video clips
Using the shooting modes
Shooting modes are predefined settings for everyday situations. They are optimized for
particular types of scenes or shooting situations.
To select a shooting mode:
1. While in
Picture Capture, touch the icon corresponding to the current shooting
mode (
by default).
2.
Touch
or to display the shooting mode you want, touch the shooting mode,
then touch OK. To exit the
Shooting Mode menu without changing the shooting
mode, touch
.
Auto Mode (Default)—For taking good shots quickly, when you do not have time to
select a special shooting mode.
Close-up—Use when taking close-up pictures of subjects between 100 mm and 1 m
(3.94 to 39.4 in) away.
Theatre—For capturing images at school programs, concerts, or indoor sporting events
without using flash.
or
Panorama—For grand landscapes or group pictures where you need to capture a wide
shot that one image cannot capture (see
Using Panorama mode” on page 17).
Landscape—For scenes with deep perspective, such as mountain scenes.
Portrait—For pictures that have one or more people as their primary subject.
Action—For capturing sporting events, moving cars, or any scene where you want to
stop the action.
Night Portrait—For capturing images of people at night. This mode uses the flash and
a long exposure. As a result, you must set the camera on a tripod or stable surface.
Beach—For capturing scenes at the beach.
Snow—For capturing scenes in snow.
Sunset—For capturing outdoor scenes at sunset.
NOTE: The shooting modes do not apply when you are recording video clips.
The shooting mode remains in effect until it is changed again, or until you turn off the
camera.
Using Panorama mode
The / Panorama mode allows you to take a sequence of 2 to 5 pictures that can be
stitched together to capture a scene too wide to fit into a single picture. To stitch your
panoramic sequence together, use
Stitch Panorama on the camera (see Stitching
panoramas” on page 29). If you installed the HP Photosmart Software (see Install the
Using the shooting modes 17
software” on page 8), you can also stitch panoramas automatically as you transfer them
to your computer.
1. While in
Picture Capture, touch the icon corresponding to the current shooting
mode (
by default). Touch or to display the / Panorama shooting
modes. Touch either
Panorama (left to right) or Panorama (right to left),
touch OK, then touch
to return to Picture Capture.
2. Press the Shutter button to take the first picture in the panoramic sequence.
3. Position the camera to take the second picture.
Use the transparent overlay of the first image
superimposed on one third of the Image Display
to align your second picture with the first.
4. Press the Shutter button to take the second
picture.
5. Continue adding up to three more pictures to the
panorama, or touch End Panorama to end the
panoramic sequence.
During Instant Review (see
Instant Review” on page 12), each image in the panoramic
sequence is displayed. When the last image is displayed, you can stitch the sequence
by touching Stitch Panorama, then touching Save when the stitched panorama appears.
You can also delete the panoramic sequence by touching
, then touching Entire
Panoramic Sequence.
Using the Picture Capture and Video Record menus
The Picture Capture and Video Record menus allow you to adjust camera
settings that affect the characteristics of the pictures and video clips you capture. The
Picture Capture Menu displays only those features available for taking pictures while
the
Video Record Menu displays only features available for recording video clips.
1. Slide
to or , then touch Menu.
2.
Touch
or if necessary to display the option you want, then touch the option to
display the option’s menu.
3.
Touch
or to display the setting you want, touch the setting, then touch OK. To
exit the menu without changing the setting, touch
.
4. To exit the menu, touch
repeatedly until you return to Picture Capture or
Video Record.
TIP: If a button for a feature displays on the Image Display, you can touch the button
to display the feature's menu and change the setting.
For help about menus and their options, touch .
Unless otherwise noted, the setting remains in effect until you turn off the camera. The
next time you turn on the camera, the settings reset to their defaults.
TIP: You can specify which settings reset to their defaults and which remain as you
specified when you turn off the camera (see
Setting Remembered Settings”
on page 43).
Chapter 3
18 Setting options for taking pictures and recording video clips
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56
  • Page 57 57
  • Page 58 58
  • Page 59 59
  • Page 60 60
  • Page 61 61
  • Page 62 62
  • Page 63 63
  • Page 64 64

Sharp R930 User manual

Category
Webcams
Type
User manual

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI