Martian mVoice Aviator User manual

Category
Watches
Type
User manual
pdfcrowd.com
user manual voice
MARTIAN VOICE SMARTWATCH USER GUIDE
Complete product user manual for Martian mVoice, Envoy, Alpha, Aviator, Electra, Passport,
Victory and G2G.
Save to PDF
GET STARTED
What's in the box
Mobile Device Compatibility
Setting The Time
Charging Your Watch
Turning On and Off
Check & Update Firmware
ShopmVoicemVipUse AlexaSupportBlog & Info
pdfcrowd.com
PAIR YOUR WATCH
Pairing Martian Watch to iOS
Pairing Martian Watch to Android
UNDERSTAND YOUR WATCH
Status Bar
Watch Menu
Music Mode
Volume
Light
Do Not Disturb (DND)
Camera Mode
Stopwatch
Find Phone
Setup Menu
Language
Date Format
LED Light
Leash
Gesture
A2DP
Firmware version
SETTING MARTIAN APP
Martian App for iPhone, iPad
Martian App for Android
USING MARTIAN WATCH
Using Voice Command
Calls
Text Messages
ADDITIONAL HELP
Master Reset
pdfcrowd.com
Factory Restore
Trouble Shooting
Safety, Regulatory and Legal
GET STARTED
Before you start using your MARTIAN VOICE COMMAND WATCH, make sure the following items
are in the box:
Martian Watch
Micro USB Cable
Quick Connect Guide
Your mobile device’s operating system has an impact on the features on your watch
functionality. Please take note of iOS and Android differences below.
Mobile Phones: The “talk and listen feature of your watch will work with selected iPhone and
Android mobile phones that have Bluetooth wireless technology and a Hands-Free Profile (HFP).
How do you know if your mobile phone works with your watch? First find out if it has Bluetooth
connectivity. To know for sure, borrow a friends Bluetooth headset and pair it with your mobile
phone. If you can place a call by saying a name in your Contact list, or answer a call, and your
phone has a HFP, then your watch will work with your mobile phone for dialing and answering
features. To find out if your phone has a HFP, check the manufacturers technical specifications.
Since your watch connects to your mobile device using Bluetooth technology, anything you can do
with your Bluetooth headset, you can do with your watch.
To use the Voice Command features on your watch, you must have a compatible Voice
Command feature on your mobile device.
Voice Command functions for Android are dependent upon your mobile device. If your mobile
device came with an integrated Voice Command app and works with a Bluetooth headset, it will
work with your watch.
On iPhone 7, iPhone 7 Plus, iPhone SE, iPhone 6, iPhone 6 Plus, iPhone 5, iPhone 5s, iPhone
4s, and iPad, watch works with Siri. On iPhone 4 and iPhone 3GS, MARTIAN works with the
integrated Voice Controls.
Text notification/display on the LED is supported with all mobile devices that have a MAP profile,
or by downloading the Martian Alerts App for Android. The MAP profile is available for all
compatible Apple products using iOS 9 or above.
Email and social media notifications, world clock, and weather display are available for Android
and iOS devices upon download of the Martian Alerts App to your mobile device.
pdfcrowd.com
The watch crown (knob on right side of watch) is out” to save battery during shipping. Rotate it to
set the time, then push it in until you hear a click.
Before you start using your watch, locate the micro USB cable included in the lower compartment
of the box. The charging cable can be plugged into your computer’s USB port or a power outlet via
a USB wall adapter (sold separately).
A solid red light will appear when the watch is charging.
A solid green light indicates the watch is fully charged.
Full charge is reached in approximately 2-3 hours when charging from the wall and approximately
3-4 hours when charging from your computer.
Note: Martian Watches are not compatible with quick charge adapters, it is recommended to use
adapters with output of 1A.
Warning: Due to the nature of the Lithium polymer rechargeable battery, a Martian Watches
lithium battery that is inactive for over one year may fall into a deep discharge state or could cause
the battery to permanently lose its ability to charge. For long-term storage, please be sure to
charge and discharge your Martian Watch at least once every six months to prevent a decrease in
battery performance; store your Martian Watch in a dry place with low humidity and at temperature
range of 10° C to 30° C, 50 to 90 F; avoid exposure to temperatures higher than 95 F (3 C).
Turning Your Watch On
Press and hold the Bottom Button for 2 seconds. When the watch comes on, you will see the word
MARTIAN in the display. If the watch does not turn on, it needs to be charged (see “Charging”).
Turning Your Watch Off
Press and hold the Bottom Button for 2 seconds. The red light will flash and the OLED will display
Goodbye.
As technology changes and adapts, so does your Martian Voice Command. The firmware on your
Martian watch is subject to new updates from time to time that may add new features, improve
functionality, and more. Visit the link below to confirm that your Martian Voice Command firmware
is up-to-date, and check back regularly to stay ahead of the pack.
Check Firmware
PAIR YOUR WATCH
pdfcrowd.com
Your watch has to be paired via Bluetooth with your mobile device before you can use it. It can only
be paired with one mobile device at a time.
Follow these steps to pair your watch to your iOS Mobile Device:
1. On your iOS Mobile Device:
a. Download the Martian mVoice App Go to the App Store; search for
Martian mVoice”. Do not download the ORANGE Martian Notifier App as it
will not work with your watch.
b. Turn on Bluetooth Go to Settings > Bluetooth on your mobile device. Turn
on Bluetooth by toggling the switch to the right. Bluetooth is on if the switch is green.
2. On your watch:
a. Turn on your watch Press and hold the bottom button for 2 seconds.
3. On your iOS Mobile Device:
a. Open the Martian mVoice app, follow the step-by-step guide to pair your Martian Watch.
b. At the pairing mode stage Press and hold the top button until “Pair Ready appears on the
display of your watch.Pair Ready must appear on the Watch until both Watch and mobile device
are paired. If the mode times out, repeat this step.
c. Accept “Bluetooth Pairing RequestA pop-up window will appear on your mobile device,
telling you that Martian Watch would like to pair with your mobile device; Tap “Pair to complete the
pairing process. If the codes do not match, tap Cancel and try again. If the pairing process is
successful, the watch will vibrate and read “Paired to [device name])”.
d. Accept “Martian Smart Request Starting with Version 1.46 of the Martian Alerts App and
Firmware Version 2.17 (see updating your watch Firmware below) an additional Bluetooth
connection is required in order to provide both Notifications and Voice to your watch. This
connection is called “Martian Smartand a final pop-up menu comes up after hitting Continue” on
your Martian mVoice app. Tap “Pair”. If successful, the watch will vibrate and read “Paired to
pdfcrowd.com
Smart.
Upon successful pairing, you will see the home page of the Martian mVoice App. At the top of the
screen you should see “Connected”. You have finalized the pairing process, and may proceed to
configure your watch.
Unpairing watch from your iOS Mobile Device
Once paired, if you wish to use your watch with a different device, you need to un-pair it from the
current mobile device and start a new pairing procedure with the next mobile device. To un-pair on
iOS, go to Settings > Bluetooth > Martian Watch > Tap the i icon > Forget This Device > Forget
Device. You must also remove the Martian Smart device from your mobile device.
After that, go to your Martian mVoice app > Settings > Reset your Watch.
TOP
Your watch has to be paired via Bluetooth with your mobile device before you can use it. It can only
be paired with one mobile device at a time.
Follow these steps to pair your watch to your Android Mobile Device:
1. On your Android Mobile Device:
a. Download the Martian mVoice App Go to the App Store; Search for
Martian mVoice App. Do not download the ORANGE Martian Notifier App
as it will not work with your watch.
b. Turn on Bluetooth Go to Settings > Connections > Bluetooth on your
mobile device. Turn on Bluetooth by tapping the switch to the right. Bluetooth is on if the switch is
green.
2. On your watch:
a. Turn on your watch Press and hold the bottom button for 2 seconds.
pdfcrowd.com
3. On your Android Mobile Device:
a. Open the Martian mVoice app, follow the step-by-step guide to pair your Martian Watch.
b. Accept “Bluetooth Pairing Request” – A pop-up window will appear on your mobile device,
telling you that Martian Watch would like to pair with your mobile device; Tap “OK to complete the
pairing process. If the codes do not match, tap Cancel and try again. If the pairing process is
successful, the watch will vibrate and read “Paired to [device name])”.
c. Connect to the Martian mVoice App – A pop-up window will appear requesting permission for
Martian to access Contacts and Call History; Tap “Yes”; and finally the last pop-up window appears
requesting permission for Martian to access your Messages; Tap “Yes”.
Upon successful pairing, you will see the home page of the Martian mVoice App. At the top of the
screen you should see “Connected”. You have finalized the pairing process, and may proceed to
configure your watch.
Unpairing watch from your Android Mobile Device
Once paired, if you wish to use your watch with a different device, you need to un-pair it from the
current mobile device and start a new pairing procedure with the next mobile device. To un-pair on
Android, go to Settings > Connections > Bluetooth. Tap the Options icon on the right of Martian
Watch and tap Unpair.
After that, go to your Martian mVoice app > Settings > Reset your Watch.
TOP
UNDERSTAND YOUR WATCH
The Status Bar provides operating information that includes battery level, volume level, Bluetooth
connected status, and date. You can also choose to include World Clock and Todays Weather by
turning these features on at the home page of the mVoice app.
Press the bottom button on the Watch once to view the Status Bar. Icons that may appear include:
pdfcrowd.com
The Menu allows you to change the settings of select features on the Watch.
To access and navigate the Watch Menu:
Press the bottom button twice quickly to view the Watch Menu.
Press the bottom button repeatedly to scroll through the available Menu items.
Press the top button to change a Menu setting.
Press the top button to scroll to the preferred setting.
To save that setting either tap the bottom button and move on to the next Menu item or do nothing
and the Watch Menu will automatically exit and save your changes after 3 seconds.
To exit the Watch Menu
Use the bottom button to scroll to Exit”, then tap the top button; or the Watch will automatically
exit after 3 seconds.
Music Mode for iOS Mobile Devices
Navigate to the Music Mode Menu item and press the top button on your Watch to activate Music
Mode and pause, play or skip to the next song. To deactivate Music Mode tap the bottom button.
Volume:
Options are High (3), Medium (2), Low (1) and Clear Voice (C).
The Clear Voice Volume Mode (C) is used for noisy or crowded situations to improve the call
quality heard at the other end. This volume mode will lower the volume of the call on the Watch and
improve the receivers call quality.
To change the Watch volume, enter the Watches Main Menu by double pressing the bottom button
on the Watch. Press the bottom button one more time to view the Watches current volume setting.
To change the volume level press the top button on the Watch until you reach the preferred volume
pdfcrowd.com
level. Once the volume is set tap the bottom button to go back to the Watches Main Menu or do
nothing and the Menu will exit automatically after 3 seconds.
The volume can be changed during an active call by tapping the bottom button repeatedly.
Options are High (3), Medium (2), Low (1) and Clear Voice (C). You will see the volume setting
your Watch is currently set on to change it, tap the top button repeatedly and it will scroll through
the volumes. You can then tap the bottom button to go back to the main menu items, or it will exit
automatically after 3 seconds. You can also change the volume during an active call by tapping the
bottom button repeatedly.
Light:
Navigate to the Light Menu item and press the top button to turn the light on the Watch. To turn the
light off press either button on the Watch.
DND Do Not Disturb
Navigate to the DND Menu item and tap the top button to activate the DND feature of the Watch.
This feature disables notifications from being sent to the Watch. Silent Alarms will still be sent to
the Watch. Turn this feature off to continue to receive notifications.
Camera Mode:
Navigate to the Camera Mode Menu item, and tap the top button to turn Camera Mode on. The
white LED light on the Watch will start flashing slowly until Camera Mode is deactivated. To
deactivate Camera Mode tap the bottom button. The white LED light on the Watch will stop
flashing. Camera Mode will automatically deactivate after two minutes in order to save battery life.
The Watch will vibrate and display “Deactivated”. To take additional photos or videos repeat this
process.
The Camera Mode feature enables the taking of photos or videos by pressing the top button on the
Watch. For a 2-second delay before the photo is taken, press and hold the top button until the
counter starts.
See Camera Modesection for additional details on usage.
Stopwatch:
Navigate to the Stopwatch Menu item, and tap the top button to activate Stopwatch. To start/stop
the stopwatch, press the top button. To reset the stopwatch, press and hold the top button for 2
pdfcrowd.com
seconds. To exit, press the bottom button.
The stopwatch will not retain any information, so each time you exit the feature, the stopwatch will
automatically reset.
Find Phone:
Navigate to the Find Phone Menu item and tap the top button to play a bar of music on your mobile
device if it is within Bluetooth range. The Martian Alerts App must be open on your mobile device
for this feature to work.
Setup Menu
Navigate to the Setup Menu item and tap the top button to enter the Setup Menu. The Setup Menu
contains the following options: language, date format, Leash, LED, Gesture, A2DP, and Firmware
version.
Language
Navigate to the Language option of the Setup Menu and tap the top button to set the preferred
language. Support languages include: English, Spanish, French, German, Japanese, Chinese and
Korean.
Date Format
Navigate to the Date Format option of the Setup Menu and tap the top button to select between the
mm/dd or dd/mm date formats.
LED Light On/Off:
Navigate to the LED option of the Setup Menu and tap the top button to turn the LED On (check
mark in box) or to turn the LED Off (no check mark in box). The LED on the Watch is a visual signal
of activities such as pairing, calls, text messages, camera mode, charged battery, low battery, etc.
occurring on the Watch.
Leash On/Off:
Navigate to the Leash option of the Setup Menu and tap the top button to turn the Leash On (check
mark in the box) or to turn the Leash Off (no check mark in box). When the Leash is turned On, the
Watch will vibrate when your mobile device is out-of-range and again when the mobile device re-
pdfcrowd.com
connects.
Gesture On/Off:
Navigate to the Gesture option of the Setup Menu and tap the top button to turn the Gesture On
(check mark in box) or to turn the Gesture Off (no check mark in box).
A2DP
Navigate to the A2DP option of the Setup Menu and tap the top button to turn A2DP On (check
mark in box) or to turn A2DP Off (no check mark in box). A2DP controls whether your music and
other sounds (e.g., from games) comes through your mobile device or Bluetooth® device, in this
case your watch. If A2DP is off, music and sounds will play through your mobile device; if it is on,
they will play through the Watch (please note that this will affect Watch battery life).
Turning A2DP On/Off requires that the Watch is re-paired to the mobile device. You must “Forget
the previous Martian Watch Bluetooth connections on the Watch prior to re-pairing. See the
appropriate section for details:
Pairing Martian Watch to iOS Mobile Devices
Pairing Martian Watch to Android Devices
Firmware version
Navigate to the Firmware version of the Setup Menu, it will display the current version that is
installed on the watch.
SETTING MARTIAN APP
Follow these steps to configure your watch to your iOS Mobile Device:
Features:
Connection status information between App and Watch.
Simple interface to customize which Notifications/Alerts you want sent to the Watch.
Customizable Vibration Patterns for each Message type with customizable Vibration Intensity
settings.
Set one-time or repeating alarms to be sent to the Watch.
Find Watch and Find Phone
Configure other Watch preferences and settings including display of World Clock, Weather
Forecast, Do Not Disturb (DND), LED, Light, Display, Leash, Gesture, Date and Time Format,
Time Zone, Scroll Speed, Alert Scroll Delay.
Help Section including access to User Manual, Frequently Asked Questions, Video tutorials and
pdfcrowd.com
Contact support.
The Martian mVoice App has five tabs: HOME, Alarms, Alexa, Notifications and Settings.
MY WATCH tab
Connected/Disconnected
This is an informational status message that indicates if the Watch is
connected to your device. The possible statuses are Connected,
Disconnected, and “Connecting.
World Time
This feature pushes accurate time for any world time zone to the
Watch OLED display. The time appears upon pressing the bottom
button on the Watch.
To enable this feature tap the switch next to World Clock to turn it ON.
By default, the local time zone will be selected. Tap on > to select the
desired Time Zone to display on the Watch. Turn OFF Use Local Time, and select the closest city
within the Time Zone desired. Tap < in the top left corner of the screen to save settings.
The Local Time option will automatically determine the closest city and send the appropriate time
to the Watch. When you land in a new city and the App is opened on your mobile device, the App
will retrieve the Local Time and display it on the Watch.
Current Weather
This feature pushes the Todays Weather to the watch OLED display including Hi and Lo
temperatures for the day and a general description of the weather. To view Todays Weather on
the Watch tap the bottom button. Todays Weather will display on the OLED display after the Time,
Status Bar, and Date.
Location Services/GPS must be set to ONfor these items to display on the Watch. To turn On
Location Services in your iPhone, go to Settings > Privacy > Location Services and switch the
Locations Services to ON (green). Then scroll down the list of Apps and tap the Martian
mVoice App icon. Tap While Using the App to turn on Location Services for the Martian
mVoice App only when the App is open on the mobile device. Ensure that there is a check mark
next to the While Using the App option.
Do Not Disturb:
pdfcrowd.com
This switch turns Do Not Disturb ON or OFF. If Do Not Disturb is ON, the Watch will only receive
Silent Alarms. No other Notifications or Messages will be received on the Watch.
Find Watch
Tap the Play button to play a tone on your Watch in order to locate it. The Watch and mobile device
must be connected, and within Bluetooth range.
Alarms tab
Silent Alarms
Silent Alarms can be used as a personal morning wake-up
without waking anyone else nearby or for reminders throughout the
day.
Tap on +” to create up to 5 Silent Alarms.
Add Silent Alarm
Tap on “+ sign in the top right of the screen to create a Silent Alarm.
Slide the hour, minute and AM/PM up and down to select the desired
time.
Repeats: Tap on > to select the frequency the Silent Alarm should
repeat (optional). Check the day of the week for the alarm to
repeat. Tap < at the top left of the screen when you have completed
setting the repeat preferences for the Silent Alarm.
Label: Tap on > to assign a Label to the Silent Alarm. Type the desired Label into the field, and
tap Done at the bottom left of the screen.
Dismiss From Phone only: Select whether to dismiss the Silent Alarm from the mobile device
only (Yes) or from either the mobile device or Watch (No). Requiring that a Silent Alarm can only be
dismissed from the mobile device is helpful for heavy sleepers.
Note: Alarms time out automatically after buzzing for 1 minute to conserve battery life.
Snooze Silent Alarm
Short-press the top button of the Watch to Snooze for 5 minutes. Snooze will show on the Watch
screen when the Silent Alarm has been Snoozed. Note: During Snooze, notifications will not be
sent to the Watch.
Dismiss Silent Alarm
pdfcrowd.com
Press and hold the top button on the Watch to dismiss the Silent
Alarm. Dismiss will show on the Watch screen when the Silent Alarm
has been dismissed. Note: If YES is selected for Dismiss From Phone
only, long-pressing the top button of the Watch will not dismiss the
Silent Alarm. In this case, the Silent Alarm must be dismissed from the
mobile device.
Tap on “Dismiss Alarmto dismiss a Silent Alarm that has been
marked as Dismiss From Phone only.
Edit Silent Alarm
Tap on Edit at the top left of the screen to make the desired changes
on a Silent alarm, and tap on Save and Done when completed.
Delete Silent Alarm
Tap on Edit at the top left of the screen, and tap on-and Delete to delete the alarm.
Alexa Tab
Tap on the Alexa tab to sign in with your Amazon account.
Once you have signed in, you can initiate Alexa with a long press of
the top button on your Martian Watch.
You will see a white LED light, feel a short vibration and “Listening…”
will appear on your Watch. When you are finished with your command,
the Watch will display “Thinking…”, and Speaking…” when Alexa
replies.
Siri will still be available, to activate Siri, short press the top button.
Note: You will not be able to use Alexa or Siri when you are on a phone
call. Similarly, while on Alexa or Siri, you will not be able to receive any incoming notifications on
your Watch.
pdfcrowd.com
Alerts Tab
The Alerts Filter Tab is pre-populated with both core notification types like Incoming Call, Missed
Call, Voicemail, Calendar, Email, SMS, Low Phone Battery, and also many commonly used Apps
such as Facebook, Twitter, Whatsapp, Instagram, Pinterest, Google+, Skype, etc. Apps appearing
in the Alerts Filter tab can be Enabled or Disabled, and can also be assigned custom Vibration
Patterns.
Adding Apps to the Alerts Tab
An App must be both installed on your iOS device AND configured to
Allow Notifications in the mobile devices Notification Settings to
receive Notifications from the App on the Watch.
To access the Notification Settings go to Settings > Notifications >
the desired App > turn onAllow Notifications”, “Show in Notification
Centerand Show on Lock Screen”.
The first time the App sends a Notification, the App will appear within
the Enabled section of the Martian mVoice App.
Turning ON/OFF Specific App Alerts to the Watch
Apps that are in the Enabled section will be pushed to the watch, and
the watch will vibrate accordingly to the customized vibration patterns.
If the desired app is not found in the Enabled section, no notifications will be sent to the Watch.
To allow a Disabled app to push notifications to the Watch, tap on > and toggle the switch ON.
The app will now appear in the Enabled section.
To stop an Enabled app from pushing notifications to the Watch, tap on > and toggle the switch
OFF. The app will now appear in the Disabled section.
App filtering will only remain in effect if the Martian mVoice App is running in the background of
your iPhone.
Customizing Vibration Patterns
Custom Vibration Patterns help to discern the difference between alerts on the Watch without
looking at the Watch. Each Vibration Pattern contains up to 4 vibration slots. Each slot can contain
a short vibration, long vibration, or a pause between vibrations. The Apps already configured in the
Alerts Tab have a default Vibration Pattern set. The default Vibration Pattern can be changed to
pdfcrowd.com
the preferred pattern for each App. Vibration Pattern preferences are saved on the Watch and will
remain in effect if the Martian mVoice App is running in the background of your iPhone.
To Set/Change Vibration Patterns
Find the App in the Alerts Tab and tap on > of the App to open the Vibration Pattern screen.
Toggle each column up/down to highlight the preferred vibration for each slot.
Tap the Play Vibration Pattern to test the pattern selected.
Tap the < button at the top left of the screen to save the Vibration Pattern and return to the Alerts
Tab.
Settings Tab
The Settings Tab contains various settings to customize the Watch to your preferences.
Register Watch:
Register your watch from within the App or go to our website
to register. By registering your Watch you will receive updates about
Firmware and App releases.
Watch Settings:
This page will allow you to customize the Watch to your preference.
Language
Tap Language and select the language desired for the Watch. Tap
< in the top left of the Language screen to save your Language
preference.
Date
The date can be displayed as mm/dd or dd/mm on the Watch. Tap Date and select your
preference. Tap < in the top left of the Date screen to save your preference.
Time
The time can be displayed as a 12-hour (12H) or 24-hour (24H) clock on the Watch. Tap Time and
select your preference. Tap < in the top left of the Time screen to save your preference.
Scroll Speed
Messages from your mobile device scroll across the OLED of the Watch.
pdfcrowd.com
Tap on Scroll Speed to choose a speed from 1 to 4; where 4 is the fastest Scroll Speed and 1 is
the slowest Scroll Speed. Tap < in the top left of the Scroll Speed screen to save your preference.
Alert Scroll Delay
When a message from your mobile device first appears on the Watch,
it pauses on the sender name before it starts scrolling the message.
Tap Alert Scroll Delay to choose the length of the pause on the
senders name, from 2 to 4 seconds. Tap < in the top left of the Alert
Scroll Delay screen to save your preference.
Vibration Intensity
Tap on Vibration Intensity to choose the desired intensity from 0 to 15;
where 15 is the strongest and 0 turns OFF the vibration. Tap < in the
top left of the Vibration Intensity screen to save your preference.
Activate LED
The LED on the Watch is a visual signal of activities such as pairing, calls, text messages, camera
mode, charged battery, low battery, etc. occurring on the Watch. Enable or disable the
red/green/blue LED light that flashes on your Watch by toggling the switch ON or OFF.
Activate Leash
When the Leash is turned ON, the Watch will vibrate when your mobile device is out-of-range and
again when the mobile device re-connects. Enable or disable the Leash by toggling the switch ON
or OFF.
Activate Gesture
When Gesture is turned ON, you can reject an incoming call by raising your wrist up and give it a
good twist and shake, just like stretching your arm. Enable or disable the Gesture by toggling the
switch ON or OFF.
Demo Sample Notifications:
After your Watch and phone are paired, tap one of these items to see how a text message or email
notification will appear on your Watch.Each of the features below requires a connection to the
Internet.
Help & Support:
User Manual
Access the complete User Manual from within the App.
pdfcrowd.com
Video Tutorials
Access video tutorials on setting up your Watch from within the App.
Frequently Asked Questions
Provides a quick reference guide to find answers to common
questions quickly and easily.
Email to Support
If you have an issue with the Watch, our Support team may ask you to
provide information from About Watch to help diagnose the problem
you are experiencing.
About Watch: Check your Watchs specs including the serial number
in this tab.
Check Firmware Version
Tap this option to determine if there is a new firmware version
available for the Watch. To download the latest Firmware for your
Watch visit our support page for more information.
App version
This is the current app version that you have. When contacting our
support team, please provide this information for troubleshoot.
Watch firmware version
This is the current firmware version that you have. When contacting our support team, please
provide this information for troubleshoot.
Serial Number
This is the serial number for your Martian Watch. The serial number can also be found on the
original packaging. When contacting our support team, please provide this information for
troubleshoot.
Note: Serial number is currently supported for the newer mVoice models (AE, PT and
pdfcrowd.com
PTL). Existing models (G2G/Passport/Victory) are not supported.
Follow these steps to configure your watch to your Android Mobile Device:
Features:
Connection status information between App and Watch.
Simple interface to customize which Notifications/Alerts you want sent to the Watch.
Customizable Vibration Patterns for each Message type with customizable Vibration Intensity
settings.
Set one-time or repeating alarms to be sent to the Watch.
Find Watch and Find Phone
Configure other Watch preferences and settings including display of World Clock, Weather
Forecast, Do Not Disturb (DND), LED, Light, Display, Leash, Gesture, Date and Time Format,
Time Zone, Scroll Speed, Alert Scroll Delay.
Help Section including access to User Manual, Frequently Asked Questions, and Contact
support.
The Martian Alerts App has four tabs: MY WATCH, ALEXA, ALERTS, ALARMS,
and SETTINGS
MY WATCH Tab
Connected/Disconnected
This is an informational status message that indicates if the Watch is
connected to your device. The possible statuses are Connected,
Disconnected, and Connecting.
World Time
This feature pushes accurate time for any world time zone to the
Watch OLED display. The time appears upon pressing the bottom
button on the Watch.
To enable this feature tap the switch next to World Clock to turn it ON.
By default, the local time zone will be selected. Tap on > to select the
desired Time Zone to display on the Watch. Turn OFF Use Local Time, and select the closest city
pdfcrowd.com
within the Time Zone desired. Tap < in the top left corner of the screen to save settings.
The Local Time option will automatically determine the closest city and send the appropriate time
to the Watch. When you land in a new city and the App is opened on your mobile device, the App
will retrieve the Local Time and display it on the Watch.
Current Weather
This feature pushes the Todays Weather to the watch OLED display including Hi and Lo
temperatures for the day and a general description of the weather. To view Todays Weather on
the Watch tap the bottom button. Todays Weather will display on the OLED display after the Time,
Status Bar, and Date.
Location Services/GPS must be set to ONfor these items to display on the Watch. To turn On
Location Services in your iPhone, go to Settings > Privacy > Location Services and switch the
Locations Services to ON (green). Then scroll down the list of Apps and tap the Martian
mVoice App icon. Tap While Using the App to turn on Location Services for the Martian
mVoice App only when the App is open on the mobile device. Ensure that there is a check mark
next to the While Using the App option.
Do Not Disturb
This switch turns Do Not Disturb ON or OFF. If Do Not Disturb is ON, the Watch will only receive
Silent Alarms. No other Notifications or Messages will be received on the Watch.
Find Watch
Tap the Play button to play a tone on your Watch in order to locate it. The Watch and mobile device
must be connected, and within Bluetooth range.
Alexa Tab
Tap on the Alexa tab to sign in with your Amazon account.
Once you have signed in, you can initiate Alexa with a long press of
the top button on your Martian Watch.
You will see a white LED light, feel a short vibration and “Listening…”
will appear on your Watch. When you are finished with your command,
the Watch will display “Thinking…”, and Speaking…” when Alexa
replies.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36

Martian mVoice Aviator User manual

Category
Watches
Type
User manual

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI