Minarik PCMXP05–115AC is an isolated input, pulse-width modulated, adjustable speed drive for DC brush motors. It has a maximum continuous armature current of 5 Amps DC and can operate motors in the 1/4 – 1/2 HP range with 130 VDC motors. The drive has an AC line voltage of 115 VAC, ±10%, 50/60 Hz, single phase and an armature voltage range of 0–130 VDC. It has a speed regulation of 1% base speed or better and an ambient temperature range of 10°C – 40°C. The drive can be mounted with its board in either a horizontal or vertical plane. It has six 0.19 in.
Minarik PCMXP05–115AC is an isolated input, pulse-width modulated, adjustable speed drive for DC brush motors. It has a maximum continuous armature current of 5 Amps DC and can operate motors in the 1/4 – 1/2 HP range with 130 VDC motors. The drive has an AC line voltage of 115 VAC, ±10%, 50/60 Hz, single phase and an armature voltage range of 0–130 VDC. It has a speed regulation of 1% base speed or better and an ambient temperature range of 10°C – 40°C. The drive can be mounted with its board in either a horizontal or vertical plane. It has six 0.19 in.
Minarik PCMXP05–115AC is an isolated input, pulse-width modulated, adjustable speed drive for DC brush motors. It has a maximum continuous armature current of 5 Amps DC and can operate motors in the 1/4 – 1/2 HP range with 130 VDC motors. The drive has an AC line voltage of 115 VAC, ±10%, 50/60 Hz, single phase and an armature voltage range of 0–130 VDC. It has a speed regulation of 1% base speed or better and an ambient temperature range of 10°C – 40°C. The drive can be mounted with its board in either a horizontal or vertical plane. It has six 0.19 in.
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI