Ensure you turn off the power before installing the Light Bulb
Scan this code
or search for
Cocoon Connect
1. Turn on Light Bulb
2. The Light Bulb will blink rapidly to show it’s in pairing mode
3. If your Light Bulb doesn’t blink rapidly, refer to your manual
EDDISON
SCREW E27
BAYONET
MOUNT B22
Before you begin, make sure you have:
1. A mobile device - Android (V4.1 or later) or iOS (V8 or later)
2. A light socket
3. A Wi-Fi connection (have the password handy)
4. Download the Cocoon Connect app
For detailed instructions and videos, visit www.cocoonproducts.com.au
First time users:
Register an account and follow the remaining prompts on screen
3. Install your light bulb 4. Confirm pairing mode
1. BEFORE YOU START 2. App Setup
If you have any issues with this step, ensure your Wi-Fi password is correct
If you are still having issues, please check your Instruction Manual
2. SELECT LIGHTING
(IN LIGHTING)
1. ADD NEW
DEVICE
Use, manage and control your Smart Light Bulb from the Cocoon
Connect app
5. Add the Light bulb
6. Connect Light bulb
to Wi–fi
7. LIGHT BULB added
successfully
8. control your light bulb
/
