2. MINOURA
  3. LW-OS
LW-OS

MINOURA LW-OS Instructions Manual

  • Hello! I am an AI chatbot trained to assist you with the MINOURA LW-OS Instructions Manual. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
  • What is the applicable diameter range of the MINOURA LW-OS clamp?
    How do I set the clamp for different target tube diameters?
    What is recommended for safely tightening the bolt into the pin?
    How do I ensure the clamp is securely closed?
    What precautions should I take when handling the upper arms of the clamp?
Quick Clamp LW-OS
instructions manual
Universal & Fully Adjustable
Light-alloy Clamping Device
M5
M5 thread
1 2
Depending on the target tube
diameter, set the plastic shim in
the clamp.
Without Shim
Thin Shim
Thick Shim
Disassemble the clamp, wind
the arm around the target tube
then close both arms.
LW-OS
= 1–3/8"
= 1–1/4"
= 1–1/16"
Thick / Thin /
MINOURA CO.,LTD.
1197-1 Godo, Anpachi, Gifu
503-2305 Japan
[email protected]
4 944924 332495
3
4
Tighten the bolt with an M5 hex
wrench for firmly closing the clamp.
When tightening the bolt into
the pin, screw it with your
in the beginning. Use the
properly screw the bolt into
the thread.
Do not use any tool from the
beginning.
Make sure the thread hole on
the pin is aligned to the bolt
hole, then put into the holes.
The upper arms are so thin
that handle them carefully
not to bend.
Make sure the pin is stably
held with both upper arms.
Made in Japan
/