Moen TS1322BL Specification

Type
Specification
CRITICAL DIMENSIONS
(DO NOT SCALE)
Single Function Body Spray
Models: TS1322 series
Rough-In: S1300
1" Extension Kit: 155656
(available separately)
DIA.
5-3/8"
(137mm)
3-1/4"
(83mm)
4-1/8"± 3/8"
1/2"
(13mm)
HOLE SIZE
4-5/8" DIA. MAX
(117mm) DIA. MAX
S p e c i f i c a t i o n s
FOR MORE INFORMATION CALL: 1-800-BUY-MOEN
www.moen.com
DESCRIPTION
Single function spray with various finishes identified by suffix
Immersion technology
OPERATION
Spray face tilts 20 degrees in any direction
FLOW
Designed to deliver 2.0 gpm max (7.6 L/min) at 80 psi
STANDARDS
Third party certified to ASME A112.18.1/ CSA B125.1, and all
applicable requirements referenced therein
WARRANTY
Lifetime limited warranty against leaks and finish defects to the
original consumer purchaser
5 year warranty if used in commercial installations
Rev. 6/11
  • Page 1 1

Moen TS1322BL Specification

Type
Specification

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI