CRITICAL DIMENSIONS
(DO NOT SCALE)
Single Function Body Spray
Models: TS1320 series
Rough-In: S1300
1" Extension Kit: 155656
(available separately)
5-3/8"
(137mm)
1/2"
(13mm)
3-1/4"
(83mm)
4-1/8"± 3/8"
HOLE SIZE
4-5/8" DIA. MAX
(117mm) DIA. MAX
S p e c i f i c a t i o n s
FOR MORE INFORMATION CALL: 1-800-BUY-MOEN
www.moen.com
DESCRIPTION
• Single function spray with various finishes identified by suffix
• Immersion technology
OPERATION
• Spray face tilts 20 degrees in any direction
FLOW
• Designed to deliver 2.0 gpm max (7.6 L/min) at 80 psi
STANDARDS
• Third party certified to ASME A112.18.1/ CSA B125.1, and all
applicable requirements referenced therein
WARRANTY
• Lifetime limited warranty against leaks and finish defects to the
original consumer purchaser
• 5 year warranty if used in commercial installations
Rev. 6/11
CRITICAL DIMENSIONS
(DO NOT SCALE)
Single Function Body Spray
Models: TS1322 series
Rough-In: S1300
1" Extension Kit: 155656
(available separately)
DIA.
5-3/8"
(137mm)
3-1/4"
(83mm)
4-1/8"± 3/8"
1/2"
(13mm)
HOLE SIZE
4-5/8" DIA. MAX
(117mm) DIA. MAX
S p e c i f i c a t i o n s
FOR MORE INFORMATION CALL: 1-800-BUY-MOEN
www.moen.com
DESCRIPTION
• Single function spray with various finishes identified by suffix
• Immersion technology
OPERATION
• Spray face tilts 20 degrees in any direction
FLOW
• Designed to deliver 2.0 gpm max (7.6 L/min) at 80 psi
STANDARDS
• Third party certified to ASME A112.18.1/ CSA B125.1, and all
applicable requirements referenced therein
WARRANTY
• Lifetime limited warranty against leaks and finish defects to the
original consumer purchaser
• 5 year warranty if used in commercial installations
Rev. 6/11
-
1
-
2
