Hydro Systems SYD6032TOBLWBIL Specification

Type
Specification
SYDNEY 6032
DESIGNER COLLECTION
PVC SyStemS InClude:
6 Fully directional adjustable ow
PVC jets
Anti-vortex safety suction
Color matched system trim
HydroOzone ozone sanitation system
Rigid PVC piping
Self draining pump and system
Soft Touch electronic on/off control
with 30-minute integral times
2.25 HP single speed pump
Cable waste and overow
OPtIOnS: (more information avai lab le on our we bsi te)
Additional Jets
- Directional or Swirling
Back Masseuse Systems
Chromatherapy-LED Lighting System
Custom Jet and Pump Location
Electronic Low Water Protection
Extra High Density
Grab Bars
- Standard or Universal
Hydro Coat
Hydro Express Quick Ship
Hydro Fusion
Hydro Indulge
HydrOzone UV System
In-line Heater
Integral Waste and Overow
- Round or Linear
Jumbo Jets
- Directional or Rotating
Lumbar Support
Micro Therapy Jets
Molded Armrests
Neck Masseuse Pillow
Standard eleCtrICal requIrementS:
Whirlpool System | One 20 Amp Dedicated Circuit
Thermal Air System | One 15 Amp Dedicated Circuit
Combo System | One 15 Amp Dedicated Circuit and One 20 Amp Dedicated Circuit
Indulge System | One 15 Amp Dedicated Circuit
Hydro Fusion (600 or 1500 Watts) | One 15 Amp Dedicated Circuit
Inline Heater (600 or 1500 Watts) | One 15 Amp Dedicated Circuit
*All electrical components come standard at 115 volts*
*All electrical circuits must be GFCI protected*
29132 Avenue Paine. Valencia, CA, 91355
661.775.0686 | hydrosystem.com
Page 1 of 2
Standard Grab Bar
Linear Integral Waste and Overow
Chromatherapy-LED Lighting System
SYDNEY 6032
DESIGNER COLLECTION
aCrylIC tub
*Tub must be set in mortar base*
Acrylic models nished in 1/8” thick layer of deep lustrous acrylic
Pre-wired pump on pump platform (standard pump location only)
Integral E-Z level platform facilitates installation
29132 Avenue Paine. Valencia, CA, 91355
661.775.0686 | hydrosystem.com
All specications and options subject to change without notice please
contact a Hydro Systems representative for more information.
Certain options or altering the pump/blower location may cause
the pump/blower to extend beyond the tub decking. For cutout
dimensions wait for unit to arrive. All specications subject to change
without notice.
CODES AND COMPLIANCES
Massachusetts code File no: P1-0614-491
Page 2 of 2
aS ShOwn:
Whirlpool option (top)
LH Tile Flange and Skirt (bottom)
FeatureS ShOwn:
Overflow location
Standard jet location
alSO aVa I l a b l e :
Soaking tub only
Thermal Air
Combo
SIze:
60.32.20
baCkSlOPe:
28 degrees
water CaPaCIty:
63 Gallons
weIght:
90 - 130 pounds depending on system
3-wall InStall dImenSIOnS:
(L)ength - 60”
(W)idth - 32”
Top of Ledger - 20-3/4”
InStallatIOn tIPS:
When adding integral linear drain
p-trap location is now below waste
Adding multiple systems/options may
require equipment to stick out from
tub deck or be installed remotely
HYDRO SYSTEMS, INC.
29132 Avenue Paine, Valencia, CA 91355
661.775.0686, fax 661.775.0668, www.hydrosystem.com
Note: The information contained on
this drawing is the sole property of
Hydro Systems, Inc. Any
reproduction in part or as a whole
without the written permission of
Hydro Systems, Inc. is prohibited.
Title:
Date:
Scale:
SYDNEY 6032-20
June 18, 2018
None
Rev:
Date:
Material: Acrylic and Fiberglass, ¼" nominal thickness
Pump/
Blower
60
16
3
4
9
40
21
22
2.75
17.5
28°
32
19.75
16
20
Pump/
Blower
1
V-3
Optional Equipment Dimensions
Whirlpool Pump: 12"(H) x 16"(L)
Thermal Air Blower: 5"(H) x 11"(L)
Hydro Fusion: 7"(H) x 15.5"(L)
Hydro Indulge: 11"(H) x 19"(L)
  • Page 1 1
  • Page 2 2

Hydro Systems SYD6032TOBLWBIL Specification

Type
Specification

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI