SYD6036TOBLWBIL

Hydro Systems SYD6036TOBLWBIL, SYD6036TOBLWPCL, SYD6036TOWLWPCR Specification

  • Hello! I am an AI chatbot trained to assist you with the Hydro Systems SYD6036TOBLWBIL Specification. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
  • What are included in the PVC system of this bathtub?
    What is the standard electrical requirement for the whirlpool system?
    What is the size of the bathtub?
    What is the water capacity of the acrylic tub?
    What is the weight of the bathtub?
SYDNEY 6036
DESIGNER COLLECTION
PVC SyStemS InClude:
6 Fully directional adjustable ow
PVC jets
Anti-vortex safety suction
Color matched system trim
HydroOzone ozone sanitation system
Rigid PVC piping
Self draining pump and system
Soft Touch electronic on/off control
with 30-minute integral times
2.25 HP single speed pump
Cable waste and overow
OPtIOnS: (more information avai lab le on our we bsi te)
Additional Jets
- Directional or Swirling
Back Masseuse Systems
Chromatherapy-LED Lighting System
Custom Jet and Pump Location
Electronic Low Water Protection
Extra High Density
Grab Bars
- Standard or Universal
Hydro Coat
Hydro Express Quick Ship
Hydro Fusion
Hydro Indulge
HydrOzone UV System
In-line Heater
Integral Waste and Overow
- Round or Linear
Jumbo Jets
- Directional or Rotating
Lumbar Support
Micro Therapy Jets
Molded Armrests
Neck Masseuse Pillow
Standard eleCtrICal requIrementS:
Whirlpool System | One 20 Amp Dedicated Circuit
Thermal Air System | One 15 Amp Dedicated Circuit
Combo System | One 15 Amp Dedicated Circuit and One 20 Amp Dedicated Circuit
Indulge System | One 15 Amp Dedicated Circuit
Hydro Fusion (600 or 1500 Watts) | One 15 Amp Dedicated Circuit
Inline Heater (600 or 1500 Watts) | One 15 Amp Dedicated Circuit
*All electrical components come standard at 115 volts*
*All electrical circuits must be GFCI protected*
29132 Avenue Paine. Valencia, CA, 91355
661.775.0686 | hydrosystem.com
Page 1 of 2
Standard Grab Bar
Linear Integral Waste and Overflow
Chromatherapy-LED Lighting System
SYDNEY 6036
DESIGNER COLLECTION
aCrylIC tub
*Tub must be set in mortar base*
Acrylic models nished in 1/8” thick layer of deep lustrous acrylic
Pre-wired pump on pump platform (standard pump location only)
Integral E-Z level platform facilitates installation
29132 Avenue Paine. Valencia, CA, 91355
661.775.0686 | hydrosystem.com
All specications and options subject to change without notice please
contact a Hydro Systems representative for more information.
Certain options or altering the pump/blower location may cause
the pump/blower to extend beyond the tub decking. For cutout
dimensions wait for unit to arrive. All specications subject to change
without notice.
CODES AND COMPLIANCES
Massachusetts code File no: P1-0614-491
Page 2 of 2
aS ShOwn:
Whirlpool option (top)
LH Tile Flange and Skirt (bottom)
FeatureS ShOwn:
Overflow location
Standard jet location
alSO aVa I l a b l e :
Soaking tub only
Thermal Air
Combo
SIze:
60.36.20
baCkSlOPe:
28 degrees
water CaPaCIty:
69 Gallons
weIght:
115 - 155 pounds depending on system
3-wall InStall dImenSIOnS:
(L)ength - 60”
(W)idth - 36”
Top of Ledger - 20-3/4”
InStallatIOn tIPS:
When adding integral linear drain
p-trap location now below waste
Adding multiple systems/options may
require equipment to stick out from
tub deck or be installed remotely
60
Optional Equipment Dimensions
36
18
4
9
40
1
• Whirlpool Pump: 12"(H) x 16"(L)
• Thermal Air Blower: 5"(H) x 11"(L)
• Hydro Fusion: 7"(H) x 15.5"(L)
• Hydro Indulge: 11"(H) x 19"(L)
17.5
19.75
Pump/
Blower
2.75 18
21
HYDRO SYSTEMS, INC.
29132 Avenue Paine, Valencia, CA 91355
661.775.0686, fax 661.775.0668, www.hydrosystem.com
Note: The information contained on
this drawing is the sole property of
Hydro Systems, Inc. Any
reproduction in part or as a whole
without the written permission of
Hydro Systems, Inc. is prohibited.
Title:
Date:
Scale:
SYDNEY 6036
June 22, 2018
None
Rev:
Date:
V-1
Material: Acrylic and Fiberglass, ¼" nominal thickness
28°
Pump/
Blower
24
22
3
/