Legrand WWRL50 Installation guide

Category
Motorcycle Accessories
Type
Installation guide
WWRL50xx Installation Instructions Addendum
Multi-Way Dimming Installation!
The WWRL50xx Wi-Fi Smart Tru-Universal dimmer can be installed in single pole
and in multi-way dimming applications. !
The WWRL50xx is designed to work with the existing HMR radiant multi-location
dimming remote. It can be installed on the hot (panel) side or load side of the three
way circuit. This sheet describes both methods. The WWRL50 has 5 wire leads
including ground. Please note that a neutral connection is required.
Method 1 - WWRL50xx mounted on the electrical panel side of circuit
Method 2 - WWRL50xx mounted on the load side of the circuit
Ground(green wire)
Hot
(black wire)
Load
(red wire)
Remote
(yellow wire)
White
(white wire)
Ground(green
wire)
Remote
(red screw)
Load
(gold
screw)
Load
(gold
screw)
Line
Load
WWRL50
HMR
Remote
Ground
Neutral
Load
Line/Hot
50’ MAX RECCOMENDED DISTANCE BETWEEN DIMMER AND HMR REMOTE
Ground(green wire)
Hot
(black wire)
Load
(red wire)
Remote
(yellow wire)
White
(white wire)
Ground(green
wire)
Remote
(red screw)
Load
(gold
screw)
Load
(gold
screw)
Line
Load
HMR
WWRL50
Remote
Line/Hot
Load
Ground
Neutral
50’ MAX RECCOMENDED DISTANCE BETWEEN DIMMER AND HMR REMOTE
  • Page 1 1

Legrand WWRL50 Installation guide

Category
Motorcycle Accessories
Type
Installation guide

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI