Furniture of America IDF-3411WH-PC Installation guide

For more information contact our team: [email protected]

Align connecting bars (#4,5) to the holes of the side

rails (#2,3). Secure by using bolts (#A,B) as shown in

the picture.

Align chair frame to the holes of the chair back

(#1), then secure by using bolts (#A).

DO NOT TIGHTEN ALL BOLTS UNTIL ASSEMBLY IS COMPLETED

Align seat (#6) to the seat frame, then

secure by using screws (#C). There will be

no pre-drilled holes on the seat (#6).

ASSEMBLY COMPLETED

This manual is also suitable for