Mircom LT-6162-CCH-5008-ANNUNKIT Installation guide

  • Hello! I am an AI chatbot trained to assist you with the Mircom LT-6162-CCH-5008-ANNUNKIT Installation guide. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
1 LT-6162 Rev 1
CCH-5008-ANNUNKIT Installation
Instructions
1. Contents of the Kit
Name Quantity Picture Description
CH-455 1
Backplate for 8 modules
Attach to backbox with 4 HD-212 nuts
BK-368 12
Medium “Z” Bracket 4 ½” used for mounting
display adders FDX-008(W)(KI), IPS-2424DS,
QAZT-5302DS and RAX-1048TZDS
Attach to backplate with 24 HD-050 nuts
BK-369 2
Small “Z” Bracket 3 ¾” used for mounting
RAX-LCD and RAXN-LCD annunciators if
more display frames are required
Attach to backplate with 4 HD-050 nuts
CH-503B 1
2-window deadfront used for RAX-LCD and
RAXN-LCD Annunciators
Attach to backbox with 2 HD-024 metal
screws and 2 HD-304 washers
CH-502B 3
2-window deadfront used for mounting display
adders FDX-008(W)(KI), IPS-2424DS, QAZT-
5302DS and RAX-1048TZDS
Comes with 4 x CH-536B deadfront covers
attached with 16 screws
Attach to backbox with 2 HD-024 metal
screws and 2 HD-304 washers
CH-443B 1
2-window deadfront used for the QMP-5101B,
QMP-5101N, QMT-5302 and QMT-5302N
Comes with 2 x CH-436B blank plates
attached with 4 nuts
Attach to backbox with 2 HD-024 metal
screws and 2 HD-304 washers
HD-024 10
Metal screw
For fastening CH-503B, CH-502B, CH-443B
deadfronts to backbox (8), and extra (2)
LT-6162 Rev 1 2
HD-304 10
Washer
For fastening CH-503B, CH-502B, CH-443B
deadfronts to backbox (8) and extra (2)
HD-212 5
Nut, #8-32
For fastening backplate to backbox (4) and
extra (1)
HD-050 54
Nut, #6-32
For fastening brackets to backplate (24),
modules to brackets (24), and extra (6)
HD-226 5
Spring nut
For closing deadfronts
MD-575 2
Cable extender, 26-pin ribbon
MD-687 6
34-pin ribbon cable, 12”
Name Quantity Picture Description
24.0”
12.0”
3 LT-6162 Rev 1
2. Attach the Backplate
3. Attach Brackets
CH-455 Backplate
4 x HD-212 nuts
Bracket
4 x HD-050
nuts
Install brackets pointing out
LT-6162 Rev 1 4
4. Mount Annunciators
5. Attach Deadfronts
4 x HD-050 nuts
RAXN-LCD
2 x BK-369
2 x HD-304 washers
2 x HD-024 screws
CH-443 deadfront
Slide HD-226 spring
nut on to side rail
aligned with the screw
on the deadfront
5 LT-6162 Rev 1
Example Setup
CH-443
CH-502
CH-502
CH-503
/