3
Check the setting of the Windows’ power supply.
When it is set to enter into the system standby (sleep) if no operation has been performed for a certain
period of time, TxLink3 stops its operation and printing also stops even if it is in the printing operation. To
prevent this, please confirm “System standby” setting.
4
Install the Mimaki driver.
To connect it with our printer, install the Mimaki driver. You can gain the Mimaki driver via two ways below:
- CD attached with printer
-Mimaki’s website
Installation of TxLink3
1
Before installation, remove the dongle if it is connected to the PC.
2
Insert the installation CD into the PC. When [Automatic] is displayed, select “Install the program”.
The installer starts.
3
Display CD menu. Select [Install TxLink3]
4
The [Installer Language] screen is displayed.
Select the language that you will display, and click [OK].
5
The Setup Wizard starts. Click [Next].
6
The License Agreement is displayed. Read it and click [I Agree].
7
Specify [Install to…]. Select a folder in the drive with enough capacity. After selecting, click [Next].
8
Specify the setup type.
If you have a dongle, select [Dongle Version (CodeMeter) and click
[Next].
9
Specify the start menu folder. Click [Install]. The installation starts.
10
The [User data] screen is displayed. Specify a folder to save the TxLink3
setting and temporary files. Specify a folder in the drive with enough
capacity from [Change folder…]. Then, click [OK].
11
The message prompting you to connect the dongle with the PC is
displayed.
Set the USB dongle into the PC, and click the [OK] button.
12
The installation completion screen is displayed. Click [Next].
13
The installation wizard is terminated. Click [Finish].
Starting TxLink3
First, connect the USB dongle, and then start TxLink3.
When you use Windows XP, Vista and 7:
Select [All programs] – [TxLink3] – [TxLink3] from the [Start] menu.
When you use Windows8 and 8.1:
Open the [All application] screen and select [TxLink3] - [TxLink3].
When you use Windows 10:
Select [All App] – [TxLink3] – [TxLink3] from the [Start] menu.
Settings of TxLink3
License Activation
For the initial start of TxLink3, various settings are required. License Activation use the Internet. If the PC in which
you installed TxLink3 is not connected to the Internet and there is other PC that is connected to the Internet, you can
perform license activation by using it.
1
At the initial start-up, [Mimaki Online License Activation] is
displayed.
Enter your company name, the e-mail address of the person in
charge (*),
select your country, enter your dealer name and
choose your printer name.
When you entered all, click [Activate].
(*)After activation, we send e-mail to this address.
[When you connect to the Internet]
1
The dialog on the left is displayed and
license activation is
completed.
[When you do not connect to the Internet]
1
The dialog on the left is displayed.
To perform license activation in the PC connected
to the
Internet, create the weblink file
Click [OK].
2
The [Save as…] dialog is displayed. The default name is “LicReq”. Save it in a proper location.
Though the TxLink3 setup screen is dislayed next, cancel all and terminate it.
3
Copy the file you saved in the Step 2 into the PC connected to the Internet.
4
Double-click the weblink file.
The web browser starts and it connects to the license
activation screen.
Check that the contents is correct and click [
Oder and
download License file Now
].
The licanse file (extension*..eslic14
) is downloaded.
(Depending on th
e browser, as the saving dialog is
displayed, specify a proper location.)
5
Copy the license file in the PC in which you installed TxLink3.
6
Double-click the license file, so license activation is finished.
Please start TxLink3.
Print Environment Settings
About “Print Environment”
Print environment: It puts output information (printer, output port, output resolution, ICC profile setting etc...) into one
file. If you set print environment, it enable to output in appropriate state
Additional method of “Print Environment”
Adding way for print environment is the following two ways.
- Download “print environment” file on Mimaki website and add it.
- Create your own print environment and add it.
Download “print environment” file on Mimaki website and add it
You can download print environment file on Mimaki official website. (It may not available depending on your models
or ink.)
Go to download page on each printer. The file extension is *.PrEnv.
1
The [No print environment has yet been defined.] screen is displayed.
Click the [Import] button.
2
[Open] window is displayed. Select downloaded printer environment file and click [Open].
3
[Print Environment] window is open and selected file will be added.
Select this file and press [Settings]. [Printer settings] window will be displayed.
Then go to [Port setting] written as follows.
Create your own print environment and add it
You can create the print environment file as you want.
[How to create]
1
The [No print environment has yet been defined.] screen is displayed.
Click the [Import] button.
2
The [Add Print Environment] screen is displayed.
Open [Driver] – [Mimaki], select your printer and setting, and click the [OK] button.
3
Next, the [Print settings] screen is displayed.
Go to Port setting written as follows.
Port setting.
Connect the PC with one printer, and turn on the power supply of the printer.
1
From the left list on the [Print settings] screen, select “Printer and
Port”.
Click the “New” button.
2
The [Edit Printer Settings] screen is displayed.
Click the [Add…] button.
3
The [Add Port] screen is displayed.
[Add Port] screen is displayed.
In case of connecting USB2.0 -> select ”Mimaki USB2 Port",
in case of connecting Ethernet cable -> Select “Mimaki TCP/IP” and click [Yes].
4
[When you select “Mimaki USB port” ]
Input name on [Name] to recognize printer. (In case of setting multiple
printers, you cannot put same name.)
After setting, click [OK] and close the window.
[When you select “Mimaki TCP/IP” ]
Click [Search Printer] button.
The printer which is connecting will be displayed
on the list and select it.
Click [OK] button.
5
Return to the [Edit Printer Settings] screen. Select “Mimaki” from the [Status Monitor] combo box.
Click the [OK] button.
6
The [New Printer] screen is displayed. Enter the name by which you can identify the connected printer, and
click OK.
7
Return to the [Print Settings] screen. The name that you entered in the [New Printer] screen is displayed in
[Printer Name].
Ink setting
It is necessary to set the slot order of ink which is installed on printer depending on model, using ink.
z For Tx series make sure to perform this setting. Also, the file provided from Mimaki needs to this
setting.
z Setting is also may be needed when using fluorescent color.
z DO NOT change the settings except above model, ink color.
From the left list on the [Print Settings] screen, select “Printing
Ink Assignment”.
[For Tx series]
z When you use Tx500 with six colors ink set:
Two same color inks are mounted simultaneously on the
printer, but you should select “(none)”
on the lager slot
number.
z In the conditions below, set as follows.
Red and orange are mounted simultaneously:
Red: “Red/ orange”
Orange: “Profile channel 8”
Blue and violet are mounted simultaneously:
Blue: “Blue/ violet”
Violet: “Profile channel 8”
z In case of there is no appropriate color to selection items
and when you want to put the color into ICC profile, select
“Profile channel 8” - “Profile channel 12”.
z In case of there is no appropriate color to selection items
and does not want to put the color in ICC profile, using as
replacement color, select “spot color1” - “spot color 6”.
[When using fluorescent color on TS300P]
z In case of using “Print environment file” 䠖 DO NOT CHANGE this setting.
z In case of creating “Print environment file” on your own.䠖
At initial setting, fluorescent color can be used for color replacement.
If you would like to create ICC profile which includes fluorescent color on TxLink3, change the setting as
follows.
Before change
(Use only for color
replacement)
䋻
䋻
After change
(Use for color replacement or
ICC profile)
Ink color
Spot color 1(S1)
䋻
Profile channel 8 (P8) Fluorescent yellow
Spot color 2(S2)
䋻
Profile channel 9(P9) Fluorescent pink
Retrieve print settings from printer : TS300PࠊࠊTx300PࠊTS500P only
It is necessary to retrieve print settings (output resolution, passes etc...) from the connecting printer.
1) From the left list on the [Print Settings] screen, select “Device
options.
2) Press [Retrieve print modes from printer] button.
3) [Device options] screen is displayed. Press [Retrieve] buttion.
*When you select Ethernet port, it takes several seconds
before you get print settings.
4) Message is displayed. Press [OK] button and close [Device
options] screen.
After setting them, click the [OK] button and close the [Print Settings] screen.
Spectrophotometer setting
1
Select [Tool]-[Option] menu from TxLink3 main screen.
2
[Application Defaults] screen is displayed.
Select “Spectrophotometer” from the left list on the screen.
3
Click [Change] button on “Measurement Specification”
area.
[Measurement Specification] screen is displayed.
Select “Textile & Painting (D65, 10 Degree)”
and press
[OK] button.
Click [OK] button on [Application Defaults] screen.
Notice
z It is strictly prohibited to write or copy a part or whole of TxLink3 documents without our approval.
z The contents of TxLink3 documents may be subject to change without notice.
z Due to improvement or change of this software, the description of this document could be partially different in specification, for which your
understanding is requested.
z It is strictly prohibited to copy this software to other disk (excluding the case for making backup) or to load on the memory for the purpose
other than executing it.
z With the exception of what is provided for in the warranty provisions of MIMAKI ENGINEERING CO., LTD., we do not assume any liability
against the damages (including but not limited to the loss of profit, indirect damage, special damage or other monetary damages) arisen out
of the use or fail-ure to use of this product. The same shall also apply to the case even if MIMAKI ENGINEERING CO., LTD. had been
notified of the possibility of arising damages in advance. As an example, we shall not be liable for any loss of the media (works) made using
this product or indirect damages caused by the product made using this media.
Privacy Policy
Please read the following web site for our Privacy Policy:
http://mimaki.com/privacy.html
07282016 SW:3.1.4
©2016 MIMAKI ENGINEERING CO., LTD All rights reserved.
D202875-13
Setup Guide ENGLISH
Thank you for purchasing our “TxLink3”.
The explanation on setup of TxLink3 is provided in this document.
Environment
Printer:
TxLink3 Lite JV300 Series, JV150 Series, CJV300 Series, CJV150 Series, TS300P-1800,
Tx300P-1800
TxLink3 Standard JV300 Series, JV150 Series, CJV300 Series, CJV150 Series, JV5 Series,
TS300P-1800, TS500-1800DS, TS500P-3200, TS5-1600AMF, Tx300P-1800,
Tx500-1800B, Tx500-1800DS, Tx400-1800B, Tx400-1800D,MM700-1800
TxLink3 Professional JV300 Series, JV150 Series, CJV300 Series, CJV150 Series, JV5 Series,
TS300P-1800, TS500-1800DS, TS500P-3200, TS5-1600AMF, Tx300P-1800,
Tx500-1800B, Tx500-1800DS, Tx400-1800B, Tx400-1800D,MM700-1800
Image Format: PostScript2/3, EPS, AI, PDF (X-3), JPEG, BMP, PNG and TIFF
System Requirements:
OS Windows XP(32bit), Windows Vista(32/64bit), Windows 7(32/64bit), Windows 8(32/64bit),
Windows 8.1(32/64bit), Windows 10(32/64bit)
CPU Intel Core i7(2.66GHz)
㻌
or more.
Chip set Intel chip set(*1)
Memory 1GB or more (2GB or more recommended)
HDD capacity 160GB or more.
Interface USB 2.0 (*2), Ethernet
Spectrophotometer Barbieri, ColorScout, X-Rite
(*1) If you do not use the one manufactured by Intel, an error may occurs during output.
(*2) At least two ports are required; one for connecting the USB dongle and one for one printer.
Installation of TxLink3
Before installing TxLink3
1
Check whether you have the following items in hand:
- Installation CD of TxLink3
- USB dongle
If there is a missing item, contact
a distributor in your district.
2
Check the Automatic Updates setting of Windows Update.
If you select “Automatic” on the [Automatic updates] of Windows Update, automatically update program may
be installed at the set times and the PC may be restarted. To prevent automatic restart of the PC, select
“Download updates for me, but let me choose when to install them.” On the [Automatic Updates] of the
[Control Panel].
䝉䝑䝖䜰䝑䝥䜺䜲䝗᪥ᮏㄒ
䛣䛾ᗘ䛿䚸ᘢ♫䛂TxLink3䛃䜢䛚㈙䛔ୖ䛢䛔䛯䛰䛝䚸ㄔ䛻䛒䜚䛜䛸䛖䛤䛦䛔䜎䛩䚹
TxLink3 䛾䝉䝑䝖䜰䝑䝥䛻㛵䛧䛶䛾ㄝ᫂䜢䛔䛯䛧䜎䛩䚹
ືືస⎔ቃ
ᑐ㇟䝥䝸䞁䝍䞊
TxLink3 Lite JV300 Series, JV150 Series, CJV300 Series, CJV150 Series, TS300P-1800,
Tx300P-1800
TxLink3 Standard JV300 Series, JV150 Series, CJV300 Series, CJV150 Series, JV5 Series,
TS300P-1800, TS500-1800DS, TS500P-3200, TS5-1600AMF, Tx300P-1800,
Tx500-1800B, Tx500-1800DS, Tx400-1800B, Tx400-1800D,MM700-1800
TxLink3 Professional JV300 Series, JV150 Series, CJV300 Series, CJV150 Series, JV5 Series,
TS300P-1800, TS500-1800DS, TS500P-3200, TS5-1600AMF, Tx300P-1800,
Tx500-1800B, Tx500-1800DS, Tx400-1800B, Tx400-1800D,MM700-1800
ᑐᛂ⏬ീ :㻌 PostScript2/3䚸EPS䚸AI䚸PDF䠄X-3䠅䚸JPEG䚸BMP䚸PNG䚸TIFF
䜲䞁䝇䝖䞊䝹ᚲせ䝅䝇䝔䝮せ௳
OS Windows XP(32bit), Windows Vista(32/64bit), Windows 7(32/64bit), Windows 8(32/64bit),
Windows 8.1(32/64bit), Windows 10(32/64bit)
CPU Intel Core i7(2.66GHz)
㻌௨ୖ
䝏䝑䝥䝉䝑䝖
Intel
⣧ṇ䝏䝑䝥䝉䝑䝖
(*1)
䝯䝰䝸䞊
1GB
䠄᥎ዡ
2GB
௨ୖ䠅
HDD 160GB
௨ୖ
䜲䞁䝍䞊䝣䜵䞊䝇
USB 2.0 (*2), Ethernet
ᑐᛂ Ⰽჾ
Barbieri, ColorScout, X-Rite
(*1) Intel 〇௨እ䛾䜒䛾䜢⏝䛧䛯ሙྜ䚸ฟຊ୰䛻䜶䝷䞊䛜Ⓨ⏕䛩䜛ྍ⬟ᛶ䛜䛒䜚䜎䛩䚹
(*2)USB 䝗䞁䜾䝹䛾᥋⥆䛻 1 䝫䞊䝖䚸䝥䝸䞁䝍䞊䠍ྎ䛻䛴䛝䠍䝫䞊䝖䛾ィ䠎䝫䞊䝖䛜᭱ప䛷ᚲせ䛷䛩䚹
TxLink3 ࡢࣥࢫࢺ࣮ࣝ
TxLink3 ࢆࣥࢫࢺ࣮ࣝࡍࡿ๓
1
䛚ᡭඖ䛻௨ୗ䛾䜒䛾䛜䛒䜛䛛䛤
☜ㄆ䛟䛰䛥䛔
䞉 TxLink3 䜲䞁䝇䝖䞊䝹 CD
䞉 USB 䝗䞁䜾䝹
௨ୖ䛾䜒䛾䛾୰䛷䚸㊊䛧䛶䛔䜛䜒䛾䛜䛒䜛ሙྜ䚸ᘢ♫䜒䛧䛟䛿㈍ᗑ䛻䛤㐃⤡䛟䛰䛥䛔䚹
2
Mimaki 䝗䝷䜲䝞䞊䜢䜲䞁䝇䝖䞊䝹䛧䛶䛟䛰䛥䛔䚹
ᘢ♫䛾䝥䝸䞁䝍䞊䛸᥋⥆䛩䜛䛯䜑䛻䚸Mimaki 䝗䝷䜲䝞䞊䜢䜲䞁䝇䝖䞊䝹䛧䛶䛟䛰䛥䛔䚹Mimaki 䝗䝷䜲䝞䞊䛿௨ୗ䜘䜚
ᥦ౪䛥䜜䛶䛔䜎䛩䚹
䞉 䝥䝸䞁䝍䞊䛻ᒓ䛧䛶䛔䜛 CD
䞉 䝭䝬䜻䜶䞁䝆䝙䜰䝸䞁䜾䛾 WEB 䝃䜲䝖
3
Windows Update 䛾䛾⮬ື᭦᪂䛾タᐃ䜢☜ㄆ䛧䛶䛟䛰䛥䛔
Windows Update 䛾䠷⮬ື᭦᪂䠹䛾タᐃ䜢”⮬ື”䛻タᐃ䛧䛶䛔䜛ሙྜ䚸⮬ືⓗ䛻タᐃ㛫䛻᭦᪂䝥䝻䜾䝷䝮䜢䜲䞁
䝇䝖䞊䝹䛧䚸PC 䜢㉳ື䛩䜛ሙྜ䛜䛒䜚䜎䛩䚹༳ๅ୰䛷䛒䛳䛶䜒㉳ື䛩䜛䛣䛸䛜䛒䜛䛯䜑䚸༳ๅ䛜୰᩿䛧䜎䛩䚹
PC 䛜⮬ືⓗ䛻㉳ື䛩䜛䛣䛸䜢㜵䛠䛯䜑䚸Windows㻌 Update 䛾⮬ື᭦᪂䛾タᐃ䜢䠷᭦᪂䜢⮬ືⓗ䛻䝎䜴䞁䝻䞊
䝗䛩䜛䛜䚸䜲䞁䝇䝖䞊䝹䛿ᡭື䛷ᐇ⾜䛩䜛䠹䛻䛧䛶䛟䛰䛥䛔䚹
タᐃ᪉ἲ䛿 OS 䛻䜘䜚␗䛺䜚䜎䛩䛾䛷 OS 䛾䝦䝹䝥䜢ཧ↷䛧䛶䛟䛰䛥䛔䚹
4
Windows 䛾㟁※䛾タᐃ䜢☜ㄆ䛧䛶䛟䛰䛥䛔
୍ᐃ㛫᧯స䛧䛺䛔㝿䛻䚸䝅䝇䝔䝮䝇䝍䞁䝞䜲䠄䝇䝸䞊䝥䠅䛻ධ䜛䜘䛖䛻タᐃ䛧䛶䛔䜛ሙྜ䚸༳ๅ୰䛷䛒䛳䛶䜒
TxLink3 䛾ືస䛜Ṇ䜎䜚䚸༳ๅ䛜୰᩿䛧䜎䛩䚹䛣䜜䜢㜵䛠䛯䜑䚸䝅䝇䝔䝮䝇䝍䞁䝞䜲䛻ධ䜙䛺䛔䜘䛖䛻タᐃ䛧䛶䛟䛰䛥
䛔䚹
タᐃ᪉ἲ䛿
OS
䛻䜘䜚␗䛺䜚䜎䛩䛾䛷
OS
䛾䝦䝹䝥䜢ཧ↷䛧䛶䛟䛰䛥䛔䚹
TxLink3 ࡢࣥࢫࢺ࣮ࣝ
1
䜲䞁䝇䝖䞊䝹䛩䜛๓䛻䚸䝗䞁䜾䝹䜢 PC 䛻᥋⥆䛧䛶䛔䜛ሙྜ䚸እ䛧䛶䛟䛰䛥䛔䚹
2
䜲䞁䝇䝖䞊䝹 CD 䜢 PC 䛻ᤄධ䛧䜎䛩䚹䠷⮬ື⏕䠹䛜⾲♧䛥䜜䛯ሙྜ䚸䇾䝥䝻䜾䝷䝮䛾䜲䞁䝇䝖䞊䝹ᐇ⾜䇿䜢㑅ᢥ䛧䜎
䛩䚹
3
CD 䛾䝯䝙䝳䞊⏬㠃䛜⾲♧䛥䜜䜎䛩䚹[TxLink3 䛾䜲䞁䝇䝖䞊䝹]䜢ᢲ䛧䜎䛩䚹
4
䜲䞁䝇䝖䞊䝷䞊䛜㉳ື䛧䜎䛩䚹
䠷Installer Language䠹⏬㠃䛜⾲♧䛥䜜䜎䛩䚹
䠷Japanese䠹䜢㑅ᢥ䛧䚸䠷OK䠹䜢ᢲ䛧䜎䛩䚹
5
䝉䝑䝖䜰䝑䝥䜴䜱䝄䞊䝗䛜㉳ື䛧䜎䛩䚹䠷ḟ䜈䠹䜢ᢲ䛧䜎䛩䚹
6
䝷䜲䝉䞁䝇ዎ⣙᭩䛜⾲♧䛥䜜䜎䛩䚹䛚ㄞ䜏䛾ୖ䠷ྠព䛩䜛䠹䜢ᢲ䛧䜎䛩䚹
7
䜲䞁䝇䝖䞊䝹ඛ䜢ᣦᐃ䛧䜎䛩䚹༑ศ䛻✵䛝ᐜ㔞䛾䛒䜛䝗䝷䜲䝤䛾䝣䜷䝹䝎䜢㑅ᢥ䛧䛶䛟䛰䛥䛔䚹㑅ᢥ䛧䛯䜙䠷ḟ䜈䠹䜢ᢲ
䛧䜎䛩䚹
8
䝉䝑䝖䜰䝑䝥䝍䜲䝥䜢ᣦᐃ䛧䜎䛩䚹
䠷〇ရ∧ (CodeMeter)䠹䜢㑅ᢥ䛧䚸䠷ḟ䜈䠹䜢ᢲ䛧䜎䛩䚹
9
䝇䝍䞊䝖䝯䝙䝳䞊䝣䜷䝹䝎䜢ᣦᐃ䛧䜎䛩䚹䠷䜲䞁䝇䝖䞊䝹䠹䜢ᢲ䛧䜎䛩䚹䜲䞁䝇䝖䞊䝹䛜㛤ጞ䛥䜜䜎䛩䚹
10
[䝴䞊䝄䝕䞊䝍]⏬㠃䛜⾲♧䛥䜜䜎䛩䚹
TxLink3 䛾タᐃ䛜ಖᏑ䛥䜜䜛䝣䜷䝹䝎䜢ᣦᐃ䛧䜎䛩䚹
ᣦᐃ䛧䛯䜙䠷OK䠹䜢ᢲ䛧䜎䛩䚹
11
䝗䞁䜾䝹䜢 PC 䛻᥋⥆䛩䜛䜘䛖ಁ䛩䝯䝑䝉䞊䝆䛜⾲♧䛥䜜䜎䛩䚹
PC 䛻 USB 䝗䞁䜾䝹䜢䝉䝑䝖䛧䚸䠷OK䠹䝪䝍䞁䜢ᢲ䛧䜎䛩
12
䜲䞁䝇䝖䞊䝹䛾⏬㠃䛻䛺䜚䜎䛩䚹䠷ḟ䜈䠹䜢ᢲ䛧䜎䛩䚹
13
䜲䞁䝇䝖䞊䝹䜴䜱䝄䞊䝗䛜⤊䛧䜎䛩䚹䠷䠹䜢ᢲ䛧䜎䛩䚹
TxLink3 ࡢࡢ㉳ື
ᚲ䛪 USB 䝗䞁䜾䝹䜢᥋⥆䛧䛶䛛䜙 TxLink3 䜢㉳ື䛧䛶䛟䛰䛥䛔䚹
Windows XP/Vista/7 䛾ሙྜ
䠷䝇䝍䞊䝖䠹䝯䝙䝳䞊䜘䜚䠷䛩䜉䛶䛾䝥䝻䜾䝷䝮䠹䠉䠷TxLink3䠹䠉䠷TxLink3䠹䜢㑅ᢥ䛧䜎䛩䚹
Windows 8/ 8.1 䛾ሙྜ
[䛩䜉䛶䛾䜰䝥䝸]⏬㠃䜘䜚 – [TxLink3]䠉䠷TxLink3䠹 䜢㑅ᢥ䛧䜎䛩䚹
Windows 10 䛾ሙྜ
䠷䝇䝍䞊䝖䠹䝯䝙䝳䞊䜘䜚䠷䛩䜉䛶䛾䜰䝥䝸䠹䠉䠷TxLink3䠹䠉䠷TxLink3䠹䜢㑅ᢥ䛧䜎䛩䚹
TxLink3 ࡢタᐃ
ࣛࢭࣥࢫㄆド
TxLink3 䛾ึᅇ㉳ື䛻䝷䜲䝉䞁䝇ㄆド䜢⾜䛔䜎䛩䚹䝷䜲䝉䞁䝇ㄆド䛿䜲䞁䝍䞊䝛䝑䝖䜢㏻䛧䛶⾜䛔䜎䛩䚹TxLink3 䜢䜲䞁䝇
䝖䞊䝹䛧䛯 PC 䛜䜲䞁䝍䞊䝛䝑䝖䛻᥋⥆䛧䛶䛔䛺䛟䛶䜒䚸䛻䜲䞁䝍䞊䝛䝑䝖䛻᥋⥆䛧䛯 PC 䛜䛒䜛ሙྜ䚸䛭䜜䜢䛳䛶䝷䜲䝉䞁
䝇ㄆド䛜⾜䛘䜎䛩䚹
1
ึᅇ㉳ື䚸[Mimaki 䜸䞁䝷䜲䞁䝷䜲䝉䞁䝇㉳ື]䛜⾲♧䛥䜜䜎䛩䚹
♫ྡ䚸ᢸᙜ⪅䛾 E-mail 䜰䝗䝺䝇(*)䚸ᅜྡ䚸TxLink3 䜢䛤㉎ධ䛔䛯䛰
䛔䛯㈍ᗑྡ䚸䛤⏝䛾䝥䝸䞁䝍䞊ྡ䜢ධຊ䛧䛶䛟䛰䛥䛔䚹
䛶ධຊ䛧䛯䜙䚸[᭷ຠ䛻䛩䜛]䜢ᢲ䛧䜎䛩䚹
(*)㻌 㻌 䝷䜲䝉䞁䝇ㄆドᚋ䚸䝯䞊䝹䛜㏦䜙䜜䛶䛝䜎䛩䚹
[䜲䜲䞁䝍䞊䝛䝑䝖䛻᥋⥆䛧䛶䛔䜛ሙྜ]
1
ᕥ䛾䝎䜲䜰䝻䜾䛜⾲♧䛥䜜䚸䝷䜲䝉䞁䝇䛾ㄆド䛜⤊䛧䜎䛩䚹
[
䜲䞁䝍䞊䝛䝑䝖䛻᥋⥆䛧䛶䛔䛺䛔ሙྜ]
1
ᕥ䛾䝎䜲䜰䝻䜾䛜⾲♧䛥䜜䜎䛩䚹
䜲䞁䝍䞊䝛䝑䝖䛻᥋⥆䛧䛶䛔䜛 PC 䛻䛶䚸
䝷䜲䝉䞁䝇ㄆド䜢⾜䛖䛯䜑䛻䚸䜴䜵䝤䝸䞁䜽䝣䜯䜲䝹䜢సᡂ䛧䜎䛩䚹
[OK]䜢ᢲ䛧䜎䛩䚹
2
[ྡ๓䜢䛴䛡䛶ಖᏑ]䝎䜲䜰䝻䜾䛜⾲♧䛥䜜䜎䛩䚹
ึᮇ䛾ྡ๓䛿䚸”LicReq”䛷䛩䚹㐺ᙜ䛺ሙᡤ䛻ಖᏑ䛧䜎䛩䚹
TxLink3 䛾䝉䝑䝖䜰䝑䝥⏬㠃䛜⥆䛡䛶⾲♧䛥䜜䜎䛩䛜䚸䛶䜻䝱䞁䝉䝹䛧䛶䚸⤊䛥䛫䜎䛩䚹
3
2 䛷ಖᏑ䛧䛯䝣䜯䜲䝹䜢䜲䞁䝍䞊䝛䝑䝖䛻᥋⥆䛧䛶䛔䜛 PC 䛻䝁䝢䞊䛧䜎䛩䚹
4
䝣䜯䜲䝹䜢䝎䝤䝹䜽䝸䝑䜽䛧䜎䛩䚹
䜴䜵䝤䝤䝷䜴䝄䛜㉳ື䛧䚸䝷䜲䝉䞁䝇ㄆド⏬㠃䜈᥋⥆䛧䜎䛩䚹
ෆᐜ䛜㛫㐪䛳䛶↓䛔䛣䛸䜢☜ㄆ䛧[䝷䜲䝉䞁䝇䝣䜯䜲䝹䜢䝎䜴䞁䝻䞊䝗䛩䜛]
䜢ᢲ䛧䜎䛩䚹
䝷䜲䝉䞁䝇䝣䜯䜲䝹(ᣑᙇᏊ*.eslic14)䛜䝎䜴䞁䝻䞊䝗䛥䜜䜎䛩䚹䠄䝤䝷䜴䝄
䛻䜘䛳䛶䛿䚸ಖᏑ䝎䜲䜰䝻䜾䛜⾲♧䛥䜜䜛䛾䛷䚸㐺ᙜ䛺ሙᡤ䜢ᣦᐃ䛧䛶䛟
䛰䛥䛔䠅
5
䝷䜲䝉䞁䝇䝣䜯䜲䝹䜢 TxLink3 䜲䞁䝇䝖䞊䝹 PC 䛻䝁䝢䞊䛧䜎䛩䚹
6
䝷䜲䝉䞁䝇䝣䜯䜲䝹䜢䝎䝤䝹䜽䝸䝑䜽䛧䜎䛩䚹
[䝥䝻䝉䝇䛜↓䛻⤊䛧䜎䛧䛯]䝎䜲䜰䝻䜾䛜⾲♧䛥䜜䜎䛩䚹
௨ୖ䛷䚸䝷䜲䝉䞁䝇ㄆド䛿⤊䛷䛩䚹
䛣䛾ᚋ䚸
TxLink3
䜢㉳ື䛧䜎䛩䚹
ࣉࣜࣥࢺ⎔ቃࡢタᐃ
ࣉࣜࣥࢺ⎔ቃࡣ
䝥䝸䞁䝖⎔ቃ䛸䛿䚸ฟຊሗ䠄䝥䝸䞁䝍䞊䚸ฟຊ䝫䞊䝖䚸ฟຊゎീᗘ䚸ICC 䝥䝻䝣䜯䜲䝹➼䛾タᐃ䠅䜢 1 䛴䛻䜎䛸䜑䛯䜒䛾
䛷䛩䚹䛣䜜䜢タᐃ䛩䜛䛣䛸䛷䚸㐺ษ䛺≧ែ䛷ฟຊ䛜ྍ⬟䛸䛺䜚䜎䛩䚹
ࣉࣜࣥࢺ⎔ቃࡢ㏣ຍ᪉ἲ
䝥䝸䞁䝖⎔ቃ䛾㏣ຍ᪉ἲ䛻䛿 2 ✀㢮䛒䜚䜎䛩䚹
- ᘢ♫ Web 䝃䜲䝖䜘䜚䝥䝸䞁䝖⎔ቃ䝣䜯䜲䝹䜢䝎䜴䞁䝻䞊䝗䛧䚸㏣ຍ䛩䜛
- 䛤⮬㌟䛷䝥䝸䞁䝖⎔ቃ䝣䜯䜲䝹䜢సᡂ䞉㏣ຍ䛩䜛䚹
ᘢᘢ♫බᘧࢧࢺࡼࡾࣉࣜࣥࢺ⎔ቃࣇࣝࢆࢲ࣮࢘ࣥࣟࢻࡍࡿ
ᘢ♫බᘧ䝃䜲䝖䜘䜚䝥䝸䞁䝖⎔ቃ䝣䜯䜲䝹䜢ᥦ౪䛧䛶䛚䜚䜎䛩䠄ᶵ✀䚸䜲䞁䜽䛻䜘䜚䛤ᥦ౪䛜↓䛔ሙྜ䜒䛤䛦䛔䜎䛩䠅
ྛ䝥䝸䞁䝍䞊䛾䝎䜴䞁䝻䞊䝗䝨䞊䝆䜘䜚᳨⣴䛧䛶䛟䛰䛥䛔䚹ᣑᙇᏊ䛿*.PrEnv 䛷䛩䚹
䠷㐺⏝᪉ἲ䠹
1
ึᅇ㉳ື䚸䠷䝥䝸䞁䝖⎔ቃ䛿䜎䛰ᐃ⩏䛥䜜䛶䛔䜎䛫䜣䠹⏬㠃䛜⾲♧䛥䜜䜎䛩䚹
䠷䜲䞁䝫䞊䝖䠹䝪䝍䞁䜢ᢲ䛧䜎䛩䚹
2
[㛤䛟]⏬㠃䛜⾲♧䛥䜜䜎䛩䚹䝎䜴䞁䝻䞊䝗䛧䛯䝥䝸䞁䝖⎔ቃ䝣䜯䜲䝹䜢㑅ᢥ䛧䚸[㛤䛟]䝪䝍䞁䜢ᢲ䛧䜎䛩䚹
3
[䝥䝸䞁䝖⎔ቃ]⏬㠃䛜㛤䛝䚸㑅ᢥ䛧䛯䝣䜯䜲䝹䛜㏣ຍ䛥䜜䜎䛩䚹
䛣䛾䝣䜯䜲䝹䜢㑅ᢥ䛧䚸[タᐃ]䝪䝍䞁䜢ᢲ䛧䜎䛩䚹[䝥䝸䞁䝖タᐃ]⏬㠃䛜⾲♧䛥䜜䜎䛩䚹
䛴䛵䛔䛶䚸ᚋ㏙䛩䜛[䝫䞊䝖䛾タᐃ]䜢⾜䛔䜎䛩䚹
ࡈ⮬㌟࡛ࣉࣜࣥࢺ⎔ቃࣇࣝࢆసᡂࡍࡿ
⏝䛧䛯䛔䝥䝸䞁䝖⎔ቃ䝣䜯䜲䝹䛜䛚ᡭඖ䛻䛺䛔ሙྜ䚸䛤⮬㌟䛷సᡂ䛷䛝䜎䛩䚹
䠷సᡂ᪉ἲ䠹
1
ึᅇ㉳ື䚸䠷䝥䝸䞁䝖⎔ቃ䛿䜎䛰ᐃ⩏䛥䜜䛶䛔䜎䛫䜣䠹⏬㠃䛜⾲♧䛥䜜䜎䛩䚹
䠷㏣ຍ䠹䝪䝍䞁䜢ᢲ䛧䜎䛩䚹
2
[䝥䝸䞁䝖⎔ቃ䜢㏣ຍ]⏬㠃䛜⾲♧䛥䜜䜎䛩䚹
[䝖䝷䜲䝞䞊]䛛䜙”Mimaki”䜢㛤䛝䚸䛚䛔䛾䝥䝸䞁䝍䞊/タᐃ䜢㑅ᢥ䛧䚸[OK]䝪䝍䞁䜢ᢲ䛧䜎䛩䚹
3
⥆䛔䛶[䝥䝸䞁䝖タᐃ]⏬㠃䛜⾲♧䛥䜜䜎䛩䚹
䛴䛵䛔䛶䚸ᚋ㏙䛩䜛[䝫䞊䝖䛾タᐃ]䜢⾜䛔䜎䛩䚹
࣏࣮ࢺࡢタᐃ
PC 䛻ᑐ䛧䛶䛧䛶 1 ྎ䝥䝸䞁䝍䞊䜢᥋⥆䛧䚸䝥䝸䞁䝍䞊䛾㟁※䜢ධ䜜䛯ᚋ䚸௨ୗ䛾タᐃ䜢⾜䛔䜎䛩䚹
1
[䝥䝸䞁䝖タᐃ]⏬㠃䛾ᕥ䛾䝸䝇䝖䜘䜚䇾䝥䝸䞁䝍䞊䛸䝫䞊䝖䇿䜢㑅ᢥ䛧
䜎䛩䚹
䠄᪂つ䠅䝪䝍䞁䜢ᢲ䛧䜎䛩䚹
2
䠷䝥䝸䞁䝍䞊タᐃ䛾⦅㞟䠹⏬㠃䛜⾲♧䛥䜜䜎䛩䚹
[㏣ຍ]䝪䝍䞁䜢ᢲ䛧䜎䛩䚹
3
䠷䝫䞊䝖䜢㏣ຍ䛩䜛䠹⏬㠃䛜⾲♧䛥䜜䜎䛩䚹USB2.0 䛷᥋⥆䛧䛶䛔䜛ሙྜ䚸”Mimaki USB2 䝫䞊䝖"䚸Ethernet 䜿䞊䝤䝹
䛷᥋⥆䛧䛶䛔䜛ሙྜ䇾Mimaki TCP/IP䇿䜢㑅ᢥ䛧[䛿䛔]䝪䝍䞁䜢ᢲ䛧䜎䛩䚹
4
[
䇾
䇾
Mimaki USB2 䝫䝫䞊䝖䇿䜢㑅ᢥ䛧䛯ሙྜ]
䠷ྡ๓䠹ḍ䛻䚸䝥䝸䞁䝍䞊䜢㆑ู䛷䛝䜛ྡ๓䜢ධຊ䛧䛶䛟䛰䛥䛔䠄」ᩘྎ䝥䝸䞁䝍䞊䜢タ
ᐃ䛩䜛ሙྜ䚸ྠ୍䛾ྡ๓䜢䛡䜛䛣䛸䛿䛷䛝䜎䛫䜣䠅
タᐃ䛧䛯䜙䠷䛿䛔䠹䝪䝍䞁䛷㛢䛨䜎䛩䚹
[
䇾
Mimaki TCP/IP䇿䜢㑅ᢥ䛧䛯ሙྜ]
䠷䝥䝸䞁䝍䞊䜢᥈䛩䠹䝪䝍䞁䜢ᢲ䛧䜎䛩䚹
䝸䝇䝖䛻⌧ᅾ᥋⥆䛥䜜䛶䛔䜛䝥䝸䞁䝍䞊䛜⾲♧䛥䜜䜛䛾䛷䚸䛭䜜䜢㑅
ᢥ䛧䜎䛩䚹
㑅ᢥ䛧䛯䜙䠷䛿䛔䠹䝪䝍䞁䛷㛢䛨䜎䛩䚹
5
䠷䝥䝸䞁䝍䞊タᐃ䛾⦅㞟䠹⏬㠃䛻ᡠ䜚䜎䛩䚹䠷䝇䝔䞊䝍䝇䝰䝙䝍䞊䝍䜲䝥䠹䝁䞁䝪䝪䝑䜽䝇䛛䜙䇾Mimaki䇿䜢㑅ᢥ䛧䜎䛩䚹
䠷OK䠹䝪䝍䞁䜢ᢲ䛧䜎䛩䚹
6
䠷᪂䛧䛔䝥䝸䞁䝍䞊䠹⏬㠃䛜⾲♧䛥䜜䜎䛩䚹᥋⥆䛧䛶䛔䜛䝥䝸䞁䝍䞊䛜㆑ู䛷䛝䜛ྡ⛠䜢ධ䜜䚸OK 䜢ᢲ䛧䜎䛩䚹
7
䠷䝥䝸䞁䝖タᐃ䠹⏬㠃䛻ᡠ䜚䜎䛩䚹䠷䝥䝸䞁䝍䞊ྡ䠹䛻䠷᪂䛧䛔䝥䝸䞁䝍䞊䠹⏬㠃䛷ධຊ䛧䛯ྡ⛠䛜⾲♧䛥䜜䜎䛩䚹
ࣥࢡࡢタᐃ
ᶵ✀䚸⏝䛩䜛䜲䞁䜽䜹䝷䞊䛻䜘䜚䚸䝥䝸䞁䝍䞊䛻ᦚ㍕䛥䜜䛶䛔䜛䜲䞁䜽䛾䝇䝻䝑䝖㡰䜢タᐃ䛩䜛ᚲせ䛜䛒䜚䜎䛩䚹
z Tx
䝅䝸䞊䝈䛷䛿ᚲ䛪䛣䛾タᐃ䜢⾜䛳䛶䛟䛰䛥䛔䚹ᘢ♫䛛䜙ᥦ౪䛧䛶䛔䜛䝥䝸䞁䝖⎔ቃ䝣䜯䜲䝹䛷䜒タᐃ䛜ᚲせ䛷
䛩䚹
z TS300P 䛷䛿⺯ගⰍ䜢⏝䛩䜛ሙྜ䛾䜏䚸タᐃ䛜ᚲせ䛺ሙྜ䛜䛒䜚䜎䛩䚹
z
ୖグ௨እ䛾ᶵ✀䚸䜲䞁䜽䜹䝷䞊䛷䛿䛣䛾タᐃ䜢ኚ᭦䛧䛺䛔䛷䛟䛰䛥䛔䚹
䠷䝥䝸䞁䝖タᐃ䠹⏬㠃䛾ᕥ䛾䝸䝇䝖䜘䜚䇾䝥䝸䞁䝔䜱䞁䜾䜲䞁䜽䜚ᙜ䛶䇿
䜢㑅ᢥ䛧䜎䛩䚹
[Tx
䝅䝸䞊䝈䛾ሙྜ]
䝥䝸䞁䝍䞊䛻ᦚ㍕䛥䜜䛶䛔䜛㡰䛻䚸䜲䞁䜽Ⰽ䜢タᐃ䛧䛶䛔䛝䜎䛩䚹
z Tx500 䜢 6 Ⰽ䛷⏝䛩䜛ሙྜ䠖
䝥䝸䞁䝍䞊䛻䛿ྠ䛨䜲䞁䜽䛜 2 䝇䝻䝑䝖ධ䜚䜎䛩䛜䚸䛣䛣䛷䛿䝇䝻
䝑䝖␒ྕ䛜䛝䛔᪉䛻䛿䇾(䛺䛧)䇿䜢㑅ᢥ䛧䛶䛟䛰䛥䛔䚹
z ௨ୗ䛾᮲௳䛾ሙྜ䚸ḟ䛾䜘䛖䛻タᐃ䛧䛶䛟䛰䛥䛔䚹
䝺䝑䝗䛸䜸䝺䞁䝆䛜ྠ䛻ᦚ㍕䛥䜜䛶䛔䜛䠖
䝺䝑䝗䠖”䝺䝑䝗/䜸䝺䞁䝆”
䜸䝺䞁䝆䠖”䝥䝻䝣䜯䜲䝹䝏䝱䝛䝹 8”
䝤䝹䞊䛸䝞䜲䜸䝺䝑䝗䛜ྠ䛻ᦚ㍕䛥䜜䛶䛔䜛䠖
䝥䝹䞊䠖”䝤䝹䞊/䝞䜲䜸䝺䝑䝗”
䝞䜲䜸䝺䝑䝗䠖
”
䝥䝻䝣䜯䜲䝹䝏䝱䝛䝹
8”
z 㑅ᢥ㡯┠䛻ヱᙜ䛩䜛Ⰽ䛜↓䛟䚸䛛䛴䚸ICC 䝥䝻䝣䜯䜲䝹䛻ྵ䜑䛯
䛔ሙྜ䚸䇿䝥䝻䝣䜯䜲䝹䝏䝱䝛䝹 8䇾~䇾䝥䝻䝣䜯䜲䝹䝏䝱䝛䝹 12䇿䜢
㑅ᢥ䛧䛶䛟䛰䛥䛔䚹
z 㑅ᢥ㡯┠䛻ヱᙜ䛩䜛Ⰽ䛜↓䛟䚸䛛䛴䚸ICC 䝥䝻䝣䜯䜲䝹䛻ྵ䜑
䛪䚸Ⰽ⨨䛷䛾䜏⏝䛧䛯䛔ሙྜ䚸䇾䝇䝫䝑䝖䜹䝷䞊1䇿~䇾䝇䝫䝑䝖
䜹䝷䞊
6
䇿䜢㑅ᢥ䛧䛶䛟䛰䛥䛔䚹
[TS300P
䛷
䛷⺯ගⰍ䜢⏝䛩䜛ሙྜ
]
z ᘢ♫䜘䜚ᥦ౪䛧䛶䛔䜛䝥䝸䞁䝖⎔ቃ䝣䜯䜲䝹䜢䛤⏝䛾ሙྜ䠖
䛣
䛣䛾タᐃ䜢ኚ᭦䛧䛺䛔䛷䛟䛰䛥䛔䚹
z 䛤⮬㌟䛷䝥䝸䞁䝖⎔ቃ䜢సᡂ䛧䛯ሙྜ䠖
ึᮇタᐃ䛷䛿⺯ගⰍ䛿䚸Ⰽ⨨䛷䛾䜏⏝䛩䜛タᐃ䛸䛺䛳䛶䛔䜎䛩䚹TxLink3䛷⺯ගⰍ䜢ྵ䜑䛯 ICC 䝥䝻䝣䜯
䜲䝹䜢సᡂ䛧䛯䛔ሙྜ䚸௨ୗ䛾䜘䛖䛻ኚ᭦䛧䜎䛩䚹
ኚ᭦๓䠄Ⰽ⨨䛷䛾䜏⏝䠅
䋻
ኚ᭦ᚋ䠄
ICC 䝥
䝥䝻䝣䜯䜲䝹䛷䜒⏝䠅
䜲䞁䜽
Ⰽ
Ⰽ
䝇䝫䝑䝖䜹䝷䞊
1(S1)
䋻 䝥䝻䝣䜯䜲䝹䝏䝱䝛䝹
8
䠄
P8
䠅 ⺯ග䜲䜶䝻䞊
䝇䝫䝑䝖䜹䝷䞊
2(S2)
䋻 䝥䝻䝣䜯䜲䝹䝏䝱䝛䝹
9(P9)
⺯ග䝢䞁䜽
ࣉࣜࣥࢱ࣮ࡽฟຊタᐃࢆྲྀᚓࡍࡿ㸸TS300PࠊTx300PࠊTS500P ࡢࡳ
᥋⥆䛧䛯䝥䝸䞁䝍䞊䛷⏝䛷䛝䜛༳ๅタᐃ(ゎീᗘ䚸䝟䝇ᩘ➼)䜢䝥䝸䞁䝍䞊䛛䜙ྲྀᚓ䛧䜎䛩䚹
䐟䠷䝥䝸䞁䝖タᐃ䠹⏬㠃䛾ᕥ䛾䝸䝇䝖䜘䜚䇾䝕䝞䜲䝇䜸䝥䝅䝵䞁䇿䜢㑅ᢥ䛧
䜎䛩䚹
䐠[䝥䝸䞁䝍䞊䛛䜙ฟຊタᐃ䜢ྲྀᚓ]䝪䝍䞁䜢ᢲ䛧䜎䛩䚹
䐡[䝕䝞䜲䝇䜸䝥䝅䝵䞁]⏬㠃䛜⾲♧䛥䜜䜎䛩䚹[ྲྀᚓ]䝪䝍䞁䜢ᢲ䛧䜎
䛩䚹
䈜ฟຊ䝫䞊䝖䛻 Ethernet 䜢ᣦᐃ䛧䛶䛔䜛ሙྜ䚸䝕䞊䝍䛾ྲྀᚓ䛻ᩘ⛊
䛛䛛䜛䛣䛸䛜䛒䜚䜎䛩䚹
䐢䝯䝑䝉䞊䝆䛜⾲♧䛥䜜䛯䜙[OK]䝪䝍䞁䜢ᢲ䛧䚸[䝕䝞䜲䝇䜸䝥䝅䝵䞁]
⏬㠃䜢㛢䛨䜎䛩䚹
ୖグ䜢⾜䛳䛯ᚋ䚸[OK]䝪䝍䞁䛷[䝥䝸䞁䝖タᐃ]⏬㠃䜢㛢䛨䜎䛩䚹
[䝥䝸䞁䝖⎔ቃ]䝎䜲䜰䝻䜾䛻䛶䚸䛣䛾䝣䜯䜲䝹䜢㑅ᢥ䛧䛶[OK]䝪䝍䞁䛷㛢䛨䜛䛸䚸TxLink3 䛾䝯䜲䞁⏬㠃䛜⾲♧䛥䜜䜎䛩䚹
䛤⮬㌟䛷䝥䝸䞁䝖⎔ቃ䜢సᡂ䛧䛯ሙྜ䚸䛣䛣䜎䛷䛾タᐃ䛷䚸༳ๅ䛷䛝䜛䜘䛖䛻䛺䜚䜎䛩䛜䚸᭱㐺䛺≧ែ䛷䛿䛒䜚䜎
䛫䜣䚹CD ෆ䛾䇾䜽䜲䝑䜽䝸䝣䜯䝺䞁䝇䜺䜲䝗䇿䛚䜘䜃䇾䜹䝷䞊䝬䝛䞊䝆䝯䞁䝖䜽䜲䝑䜽䜺䜲䝗䇿䜢䛤ぴ䛻䛺䜚䚸௨ୗ䛾タ
ᐃ䜢⾜䛳䛶䛟䛰䛥䛔䚹
䞉 ฟຊタᐃ(ゎീᗘ/䝟䝇ᩘ➼)䜢タᐃ䛩䜛(䜽䜲䝑䜽䝸䝣䜯䝺䞁䝇䜺䜲䝗ཧ↷)
䞉 ⃰ᗘㄗᕪሗ䛚䜘䜃䝥䝸䞁䝍䝥䝻䝣䜯䜲䝹䜢సᡂ䛩䜛䚹䠄䜹䝷䞊䝬䝛䞊䝆䝯䞁䝖䜽䜲䝑䜽䜺䜲䝗䠅
Ⰽჾࡢタᐃ
䜹䝷䞊䝥䝻䝣䜯䜲䝹䛾సᡂ䜔䚸䜹䝷䞊⨨䛷 Ⰽჾ䜢䛖䛣䛸䛜䛷䛝䜎䛩䚹
⏝䛩䜛๓䛻௨ୗ䛾タᐃ䜢⾜䛳䛶䛟䛰䛥䛔䚹
1
TxLink3 䛾䝯䜲䞁䜴䜱䞁䝗䜴䜢⾲♧䛧䚸䝯䝙䝳䞊䜘䜚[䝒䞊䝹]䠉[䜸䝥䝅䝵䞁]䜢㑅ᢥ䛧䜎䛩䚹
2
[䜰䝥䝸䜿䞊䝅䝵䞁䝕䝣䜷䝹䝖]⏬㠃䛜⾲♧䛥䜜䜎䛩䚹
⏬㠃ᕥ䛾䝸䝇䝖䜘䜚”ศගගᗘィ”䜢㑅ᢥ䛧䜎䛩䚹
3
[ Ⰽᵝ]ḍ䛾[ኚ᭦䛩䜛]䝪䝍䞁䜢ᢲ䛧䜎䛩䚹
[ ᐃᵝ]⏬㠃䛜⾲♧䛥䜜䜎䛩䛾䛷䚸
”
ᕸᆅ䠃䝨䜲䞁䝔䜱䞁䜾
(D65, 10㼻)”
䜢㑅ᢥ䛧[䛿䛔]䝪䝍䞁䜢ᢲ䛧䜎䛩䚹
[䜰䝥䝸䜿䞊䝅䝵䞁䝕䝣䜷䝹䝖]⏬㠃䛻ᡠ䜚䜎䛩䛾䛷[OK]䝪䝍䞁䜢
ᢲ䛧䚸㛢䛨䜎䛩䚹
ࡈὀព
z ᮏ᭩䛚䜘䜃 TxLink3 䝋䝣䝖䜴䜵䜰ᒓ䛾䝗䜻䝳䝯䞁䝖⩌䛾୍㒊䚸䜎䛯䛿㒊䜢↓᩿䛷グ㍕䚸」䛩䜛䛣䛸䛿ᅛ䛟䛚᩿䜚䛔䛯䛧䜎䛩䚹
z ᮏ᭩䛚䜘䜃 TxLink3 䝋䝣䝖䜴䜵䜰ᒓ䛾䝗䜻䝳䝯䞁䝖⩌䛾ෆᐜ䛻㛵䛧䜎䛧䛶䚸ᑗ᮶ண࿌↓䛧䛻ኚ᭦䛩䜛䛣䛸䛜䛒䜚䜎䛩䚹
z ᮏ䝋䝣䝖䜴䜵䜰䛾ᨵⰋኚ᭦➼䛻䜘䜚䚸ᵝ㠃䛻䛚䛔䛶ᮏ᭩䛾グ㍕㡯䛜୍㒊␗䛺䜛ሙྜ䛜䛒䜚䜎䛩䚹 䛤ᢎ䛟䛰䛥䛔䚹
z ᮏ䝋䝣䝖䜴䜵䜰䜢䛾䝕䜱䝇䜽䛻䝁䝢䞊䠄䝞䝑䜽䜰䝑䝥䜢┠ⓗ䛸䛩䜛ሙྜ䜢㝖䛟䠅䚸ᐇ⾜䛩䜛௨እ䛾┠ⓗ䛷䝯䝰䝸䛻䝻䞊䝗䛩䜛䛣䛸䜢ᅛ䛟⚗䛨䜎䛩䚹
z ᰴᘧ♫䝭䝬䜻䜶䞁䝆䝙䜰䝸䞁䜾䛾ಖドつᐃ䛻ᐃ䜑䜛䜒䛾䜢㝖䛝䚸ᮏ〇ရ䛾⏝䜎䛯䛿⏝⬟䛛䜙⏕䛪䜛䛔䛛䛺䜛ᦆᐖ䠄㐓ኻ┈䚸㛫᥋ᦆᐖ䚸
≉ูᦆᐖ䜎䛯䛿䛭䛾䛾㔠㖹ⓗᦆᐖ䜢ྵ䜏䚸䛣䜜䜙䛻㝈ᐃ䛧䛺䛔䠅䛻㛵䛧䛶୍ษ䛾㈐௵䜢㈇䜟䛺䛔䜒䛾䛸䛧䜎䛩䚹䜎䛯䚸ᰴᘧ♫䝭䝬䜻䜶䞁䝆䝙䜰
䝸䞁䜾䛻ᦆᐖ䛾ྍ⬟ᛶ䛻䛴䛔䛶▱䜙䛥䜜䛶䛔䛯ሙྜ䜒ྠᵝ䛸䛧䜎䛩䚹୍䛸䛧䛶䚸ᮏ〇ရ䜢⏝䛧䛶䛾䝯䝕䜱䜰䠄䝽䞊䜽䠅➼䛾ᦆኻ䚸䝯䝕䜱䜰䜢⏝䛧
䛶సᡂ䛥䜜䛯≀䛻䜘䛳䛶⏕䛨䛯㛫᥋ⓗ䛺ᦆኻ➼䛾㈐௵㈇ᢸ䜒䛧䛺䛔䜒䛾䛸䛧䜎䛩䚹
ࣉࣛࣂࢩ࣮࣏ࣜࢩ࣮
ᘢ♫䛾䝥䝷䜲䝞䝅䞊䝫䝸䝅䞊䛻䛴䛝䜎䛧䛶䛿䚸௨ୗ䛾䜴䜵䝤䝃䜲䝖䜢䛤☜ㄆ䛟䛰䛥䛔䚹
http://japan.mimaki.com/privacy.html
07282016 SW:3.1.4
©2016 MIMAKI ENGINEERING CO., LTD All rights reserved.
-
1
-
2
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
-
MIMAKI Tx300P-1800 Operating instructions
-
-
-
MIMAKI RasterLink6Plus User guide
-
-
-
-
-
MIMAKI CJV300 (Normal) Operating instructions
-
