III
Automatic adjustment of Linearizaion .........................................2-27
Ink limit for tertiary color (when Profile (V3) is selected) .............2-45
Automatic adjustment of Gray balance .......................................2-49
ICC profile creation ......................................................................2-52
Basic setting of calibration (when selecting profile (V3)) .............2-57
Device profile saving ...................................................................2-60
Function buttons .........................................................................2-61
Test Print button, Chart Print button ............................................2-61
Import button ...............................................................................2-67
Import Compatibility Table ................................................................. 2-68
Curve Edit button .........................................................................2-69
How to edit a curve ............................................................................ 2-70
Adjustment button .......................................................................2-71
Improve impure Yellow ...................................................................... 2-71
Black Replacement ........................................................................... 2-72
Interrupt button ............................................................................2-74
Resume .......................................................................................2-75
Read measurement file ...............................................................2-77
Chapter 3 Editing a device profile
Flow of the Device Profile editing .................................................3-2
Select [Edit] ...................................................................................3-3
Adding the profile to be edited to the list. ......................................3-4
Edit list ................................................................................................. 3-5
Editing a device profile ..................................................................3-6
Editing the Ink limit ......................................................................3-10
Editing the ICC profile .................................................................3-10
Editing the Media character setting .............................................3-10
Editing the Feed correction ............................................................... 3-10
Editing the Heater temperature ......................................................... 3-11
Editing the Dot size ........................................................................... 3-11
Editing the Feed setting ..................................................................... 3-11
Editing the Top Blower ...................................................................... 3-11
Editing the Feed Direction ................................................................. 3-12
Editing the Extended information ................................................3-12
Editing the Gray balance .............................................................3-12
Editing the Linearization ..............................................................3-13
Editing the Ink limit adjustment
(Calibration / Equalization Editing Screen) ..................................3-13
Editing the Auto linearization
(Calibration/Equalization Editing Screen) ....................................3-13
Editing the Auto gray balance
(Calibration/Equalization Editing Screen) ....................................3-14
Confirm delta E (Calibration/Equalization Editing Screen) ..........3-14
Replacement ...............................................................................3-15
Adding Replacement ...................................................................3-15
Ink consumption ..........................................................................3-17