4-567-666-12(1)
Home Audio System
Listening to Music over Your Wi-Fi Network
CMT-SX7/SX7B
Wi-Fi Startup Guide
Connecting the unit to your Wi-Fi network
Xperia
iPhone
WPS
Required items: Xperia™ or other Android smartphone, wireless router
Required items: iPhone/iPad/iPod touch, wireless router
Required item: Wireless router with WPS (AOSS) button
Use an Android smartphone such as
an Xperia in which SongPal (free app)
is installed to configure Wi-Fi settings
of the unit.
This method requires a Wi-Fi
connection of the smartphone and a
BLUETOOTH connection between the
smartphone and the unit. The Wi-Fi
setting information is sent from the
smartphone to the unit via
BLUETOOTH.
• Some wireless routers have multiple
SSIDs.
Connect the unit and your Android
smartphone to the same SSID.
Use an iPhone in which SongPal (free
app) is installed to configure Wi-Fi
settings of the unit.
This method requires a Wi-Fi
connection of the iPhone and a
BLUETOOTH connection between the
iPhone and the unit. The Wi-Fi setting
information is sent from the iPhone to
the unit via BLUETOOTH.
• Some wireless routers have multiple
SSIDs. Connect the unit and your
iPhone to the same SSID.
Configure Wi-Fi settings of the unit
with a push of each WPS (AOSS)
button on the wireless router and the
unit.
• To check if your wireless router is
compatible with WPS (Wi-Fi Protected
Setup™), refer to the operating
instructions of your router.
1
Preliminary steps:
Connect your smartphone to your Wi-Fi
network.
Record the SSID and password of your router
that your smartphone is connecting to in the
following spaces.
For details, refer to the operating instructions of
your router.
SSID:
Password:
Install SongPal on your smartphone.
Search for SongPal on Google
Play™
1
Preliminary steps:
Confirm that your iPhone is
connected to your Wi-Fi
network.
Install SongPal on your iPhone.
Search for SongPal on the
App Store
1
Press the / (power) button to turn on
the unit.
Flashing
The standby indicator lights up in yellow-green, and
then
starts flashing in the display window in about
2 minutes (in some cases, 4 or 5 minutes).
2
Press the / (power) button to turn on
the unit.
Flashing
The standby indicator lights up in yellow-green, and
then
starts flashing in the display window in about
2 minutes (in some cases, 4 or 5 minutes).
2
Press the / (power) button to turn on
the unit.
Flashing
The standby indicator lights up in yellow-green, and
then
starts flashing in the display window in about
2 minutes (in some cases, 4 or 5 minutes).
2
Set the unit to WPS mode.
Use the remote and check the display window for confirming the status of the unit during the
setting.
3
Within 2 minutes, press the WPS
button* of the router.
Depending on the wireless router, press and hold the
WPS button for a few seconds. For details, refer to the
operating instructions of your router.
* The WPS button may be called “AOSS button” depending
on the wireless router.
4
Check that the (BLUETOOTH)
indicator lights up in the display
window.
Lit
When a BLUETOOTH connection is established, the
device name is displayed and
(BLUETOOTH) lights
up in the display window.
4
Check that lights up in the display
window.
Lit
The indication changes as [WPS] [Connecting]
[Complete!]. The Wi-Fi connection is established when
lights up.
5
Configure Wi-Fi settings following the SongPal instructions.
4
Check that the (BLUETOOTH)
indicator lights up in the display
window.
Lit
When a BLUETOOTH connection is established, the
smartphone name is displayed and
(BLUETOOTH)
lights up in the display window.
5
Configure Wi-Fi settings following
the SongPal instructions.
If password entry is required on
the display, select the SSID and
enter the password recorded in
step 1 - .
The screen on the right is
displayed.
6
Wait until lights up in the display
window, then restart the unit.
Lit
After checking that
lights up, turn the
unit off and on again.
It may take more than 2 minutes until lights up
in the display window. Restart the unit afterwards.
The Wi-Fi connection is established when
lights
up again after restarting.
6
Wait until lights up in the display
window, then restart the unit.
Lit
After checking that
lights up, turn the
unit off and on again.
It may take more than 2 minutes until lights up
in the display window. Restart the unit afterwards.
The Wi-Fi connection is established when
lights
up again after restarting.
3
Make a BLUETOOTH connection between the unit and iPhone.
3
Make a BLUETOOTH connection between the unit and smartphone.
Non-NFC compatible smartphone
Within 5 minutes, search for the unit on
the smartphone.
Set the BLUETOOTH function of the
smartphone to on.
Tap and start up
SongPal, then tap
[Open the Bluetooth
setting screen].
Tap [CMT-SX7xx].
Set the unit to pairing mode.
Use the remote and check the display window for confirming the status of the unit during
the setting.
Press FUNCTION repeatedly to select
[BLUETOOTH].
Press MENU once.
Press / to select [Bluetooth Menu], then
press ENTER.
Press / to select [Pairing], then press
ENTER.
Press / to select [Ok], then press ENTER.
The [Pairing] indication flashes.
FUNCTION
MENU
//ENTER
BLUETOOTH Bluetooth Menu Pairing
If the Wi-Fi connection fails
You can use a PC browser to configure Wi-Fi settings of the unit. Connect the unit to your PC using a
commercially-available network (LAN) cable.
For details, refer to the Operating Instructions, “Listening to music via a Wi-Fi network”.
This document introduces how to play music after connecting this unit to your Wi-Fi network.
A Wi-Fi network enables you to easily enjoy music stored in wireless devices in your home, such as a PC or smartphone/iPhone. For other connection or listening methods, refer to the Operating Instructions or Help Guide (indicated on the right).
First
Prepare the unit and remote.
1 Connect the speakers
to the unit before
turning on the unit.
2 Set the antenna in the upright position.
3 Connect the
unit to a wall
outlet.
4 Insert 2 batteries
to the remote.
Make sure that a LAN cable is not
connected. A wired and wireless
connection cannot be used at the
same time.
Choose your device or software to play music, then go to “ Listening
to music with the unit” overleaf.
PC
(Media Go)
Set the music stored in a PC to share and listen to it by
using Media Go.
PC
(iTunes)
PC
(Windows Media Player)
Smartphone
(SongPal app)
Listen to music in your smartphone/iPhone/iPad/iPod
touch by operating SongPal.
Xperia
(Music app)
iPhone/iPad/iPod touch
Choose a Wi-Fi connection method depending on your device,
then go to “
Connecting the unit to your Wi-Fi network” below.
Xperia
Use an Android smartphone in which SongPal (free app) is
installed to configure the Wi-Fi settings of the unit.
iPhone
Use an iPhone/iPad/iPod touch in which SongPal (free app)
is installed to configure the Wi-Fi settings of the unit.
WPS
Use a wireless router with a WPS (AOSS) button to configure
the Wi-Fi settings of the unit with a push of the button.
PC
Configure the Wi-Fi settings using a browser of a PC. Refer to the
Operating Instructions of the separate document, “Listening to music
via a Wi-Fi network”.
Documents provided
Wi-Fi Startup Guide (this document)
Explains how to listen to music stored in your PC or other device
over your Wi-Fi network.
Operating Instructions (separate document)
Explains about setting the clock, listening to CD, radio, or music
stored in BLUETOOTH/USB/other devices, etc.
Help Guide (web document for a PC/smartphone)
Explains details about how to listen to music in your personal
computer (PC) or smartphone over your wireless/wired network.
http://rd1.sony.net/help/speaker/cmt-sx7/h_zz/
If [Share Wi-Fi settings?] is displayed, tap
[Allow].
The screen on the right is
displayed.
Tap and start up [SongPal] on
your iPhone.
Follow the on-screen instructions.
When the screen on the
right is displayed, tap
[OK].
Press MENU once.
Press / to select [WPS Setting], then press
ENTER.
Press / to select [Ok], then press ENTER.
The [WPS] indication flashes.
MENU
//ENTER
WPS Setting Ok
If your smartphone does not support the NFC function,
see to on the right.
Tap and start up [SongPal] on your
smartphone.
Follow the on-screen instructions.
Touch the N-Mark on the unit with the
smartphone.
Touch and hold
until the
smartphone
responds.
Pairing is completed in about 1 minute.
Within 5 minutes, search for the unit on
the iPhone.
Tap [Settings]
[Bluetooth].
Turn on BLUETOOTH.
Tap [CMT-SX7xx].
Set the unit to pairing mode.
Use the remote and check the display window for confirming the status of the unit during
the setting.
Press FUNCTION repeatedly to select
[BLUETOOTH].
Press MENU once.
Press / to select [Bluetooth Menu], then
press ENTER.
Press / to select [Pairing], then press
ENTER.
Press / to select [Ok], then press ENTER.
The [Pairing] indication flashes.
FUNCTION
MENU
//ENTER
BLUETOOTH Bluetooth Menu Pairing
See overleaf to play back
See overleaf to play back
See overleaf to play back
Continued: “ Listening to music with the unit” overleaf