Texas Instruments TPL0102 Evaluation Module User guide
- Type
- User guide
Texas Instruments TPL0102 Evaluation Module is designed to assess the operation and performance of the TPL0102, which is a two channel, linear-taper digital potentiometer with 256 wiper positions. Each potentiometer can be used as a three-terminal potentiometer or as a two-terminal rheostat. With the help of this module, the user can configure and evaluate the TPL0102. The module has a simple evaluation process. After a few steps of preparation, you can start assessing the resistance between H, W, L terminals.
Texas Instruments TPL0102 Evaluation Module is designed to assess the operation and performance of the TPL0102, which is a two channel, linear-taper digital potentiometer with 256 wiper positions. Each potentiometer can be used as a three-terminal potentiometer or as a two-terminal rheostat. With the help of this module, the user can configure and evaluate the TPL0102. The module has a simple evaluation process. After a few steps of preparation, you can start assessing the resistance between H, W, L terminals.
User's Guide
SLIU004–March 2011
TPL0102 Evaluation Module
Features
• TPL0102: 2-channel, 256-Tap, Linear Taper DPOT with Non-Volatile Memory and I2C Interface.
• Simple Evaluation Module (EVM) for user configuration and evaluation.
• Dual Footprint Option (Board Pre-Populated with TPL0102-100RUCR MicroQFN Package)
• Interface to Host Via Connector J14
General Description
This EVM is designed to evaluate the operation and performance of the TPL0102, which is a two channel,
linear-taper digital potentiometer with 256 wiper positions. Each potentiometer can be used as a
three-terminal potentiometer or as a two-terminal rheostat.
Description of Connectors and Jumpers
Label Description
A2, A1, A0 inputs. Insert header cap in upper position to set to '1' or in lower position to
J1, J2, J3
set to '0'
J4 VDD and GND Terminal.
J5 VSS Terminal. Insert header cap to connect VSS to GND.
J8 HA Terminal
J9 WA Terminal
J10 LA Terminal
J11 HB Terminal
J12 WB Terminal
J13 LB Terminal
J14 Connector to interface with I
2
C Host
1
SLIU004–March 2011 TPL0102 Evaluation Module
Submit Documentation Feedback
© 2011, Texas Instruments Incorporated
VDD
R1
DNI
R2
DNI
SDA
SCL
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
ALT_VDD
1
2
3
4
5
6
7
8
9
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
1
2
3
4
5
6
7
8
9
J14
2
3
4
5
6
1
2
3
4
5
6
7
HEADERl7
14
13
12
11
10
9
8
HA
LA
WA
HB
LB
WB
A2
TPL0102PW
HA
LA
HB
LB
A2
WA
WB
VDD
A0
A1
GND
SCL
SDA
VSS
VDD
A0
A1
SCL
SDA
VSS
C2
0.1 Fμ
C1
0.1 Fμ
VSS
VSS
GND
VSS
ALT_VDD
VDD
GND
VDD
1
2
3
J4
1
2
J5
2
3
4
5
6
1
2
3
4
5
6
7
14
13
12
11
10
9
8
HA
LA
WA
HB
LB
WB
A2
TPL0102RUC
HA
LA
HB
LB
A2
WA
WB
VDD
A0
A1
GND
SCL
SDA
VSS
VDD
A0
A1
SCL
SDA
VSS
C7
0.1 Fμ
C6
0.1 Fμ
VDD
A0
GND
VDD
A1
GND
VDD
A2
GND
A2
1
2
3
VDD
A2
1
2
3
VDD
A1
1
2
3
VDD
A0
J3
J2
J1
A1A0
Alternate QFN Footprint
HA
HA
GND
LA
1
2
J8
J10
LA
GND
J11
J13
J12
WA
HB
WA
LA
WA
HB
GND
HB
LB
LB
GND
LB
WB
GND
WB
WB
1
2
1
2
1
2
1
2
1
2
HA
J9
GND
U1
TPL0102 Evaluation Module
U2
www.ti.com
Setup Procedure
1. Insert header caps in J1, J2, J3 to set A2, A1, A0 respectively. The board is shipped with the following
settings: A2=0, A1=0, A0=1.
2. Connect the I
2
C bus of the host processor to the board via connector J14 (pins marked SCL, SDA).
Also connect the GND pin on J14 to GND of the host processor.
3. Apply the positive supply voltage (VDD) to center pin of J4. Apply GND to lowest pin of J4.
4. Apply the negative supply voltage (VSS) to J5. The board is shipped with a header cap that connects
VSS to GND.
5. Write to the TPL0102 data registers per protocol in the datasheet (Lit# SLIS134).
6. Measure resistance between H, W, L terminals as appropriate on headers J8-J13.
TPL0102 EVM Schematic
2
TPL0102 Evaluation Module SLIU004–March 2011
Submit Documentation Feedback
© 2011, Texas Instruments Incorporated
IMPORTANT NOTICE
Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, modifications, enhancements, improvements,
and other changes to its products and services at any time and to discontinue any product or service without notice. Customers should
obtain the latest relevant information before placing orders and should verify that such information is current and complete. All products are
sold subject to TI’s terms and conditions of sale supplied at the time of order acknowledgment.
TI warrants performance of its hardware products to the specifications applicable at the time of sale in accordance with TI’s standard
warranty. Testing and other quality control techniques are used to the extent TI deems necessary to support this warranty. Except where
mandated by government requirements, testing of all parameters of each product is not necessarily performed.
TI assumes no liability for applications assistance or customer product design. Customers are responsible for their products and
applications using TI components. To minimize the risks associated with customer products and applications, customers should provide
adequate design and operating safeguards.
TI does not warrant or represent that any license, either express or implied, is granted under any TI patent right, copyright, mask work right,
or other TI intellectual property right relating to any combination, machine, or process in which TI products or services are used. Information
published by TI regarding third-party products or services does not constitute a license from TI to use such products or services or a
warranty or endorsement thereof. Use of such information may require a license from a third party under the patents or other intellectual
property of the third party, or a license from TI under the patents or other intellectual property of TI.
Reproduction of TI information in TI data books or data sheets is permissible only if reproduction is without alteration and is accompanied
by all associated warranties, conditions, limitations, and notices. Reproduction of this information with alteration is an unfair and deceptive
business practice. TI is not responsible or liable for such altered documentation. Information of third parties may be subject to additional
restrictions.
Resale of TI products or services with statements different from or beyond the parameters stated by TI for that product or service voids all
express and any implied warranties for the associated TI product or service and is an unfair and deceptive business practice. TI is not
responsible or liable for any such statements.
TI products are not authorized for use in safety-critical applications (such as life support) where a failure of the TI product would reasonably
be expected to cause severe personal injury or death, unless officers of the parties have executed an agreement specifically governing
such use. Buyers represent that they have all necessary expertise in the safety and regulatory ramifications of their applications, and
acknowledge and agree that they are solely responsible for all legal, regulatory and safety-related requirements concerning their products
and any use of TI products in such safety-critical applications, notwithstanding any applications-related information or support that may be
provided by TI. Further, Buyers must fully indemnify TI and its representatives against any damages arising out of the use of TI products in
such safety-critical applications.
TI products are neither designed nor intended for use in military/aerospace applications or environments unless the TI products are
specifically designated by TI as military-grade or "enhanced plastic." Only products designated by TI as military-grade meet military
specifications. Buyers acknowledge and agree that any such use of TI products which TI has not designated as military-grade is solely at
the Buyer's risk, and that they are solely responsible for compliance with all legal and regulatory requirements in connection with such use.
TI products are neither designed nor intended for use in automotive applications or environments unless the specific TI products are
designated by TI as compliant with ISO/TS 16949 requirements. Buyers acknowledge and agree that, if they use any non-designated
products in automotive applications, TI will not be responsible for any failure to meet such requirements.
Following are URLs where you can obtain information on other Texas Instruments products and application solutions:
Products Applications
Audio www.ti.com/audio Communications and Telecom www.ti.com/communications
Amplifiers amplifier.ti.com Computers and Peripherals www.ti.com/computers
Data Converters dataconverter.ti.com Consumer Electronics www.ti.com/consumer-apps
DLP® Products www.dlp.com Energy and Lighting www.ti.com/energy
DSP dsp.ti.com Industrial www.ti.com/industrial
Clocks and Timers www.ti.com/clocks Medical www.ti.com/medical
Interface interface.ti.com Security www.ti.com/security
Logic logic.ti.com Space, Avionics and Defense www.ti.com/space-avionics-defense
Power Mgmt power.ti.com Transportation and www.ti.com/automotive
Automotive
Microcontrollers microcontroller.ti.com Video and Imaging www.ti.com/video
RFID www.ti-rfid.com Wireless www.ti.com/wireless-apps
RF/IF and ZigBee® Solutions www.ti.com/lprf
TI E2E Community Home Page e2e.ti.com
Mailing Address: Texas Instruments, Post Office Box 655303, Dallas, Texas 75265
Copyright © 2011, Texas Instruments Incorporated
-
1
-
2
-
3
-
4
-
5
-
6
Texas Instruments TPL0102 Evaluation Module User guide
- Type
- User guide
Texas Instruments TPL0102 Evaluation Module is designed to assess the operation and performance of the TPL0102, which is a two channel, linear-taper digital potentiometer with 256 wiper positions. Each potentiometer can be used as a three-terminal potentiometer or as a two-terminal rheostat. With the help of this module, the user can configure and evaluate the TPL0102. The module has a simple evaluation process. After a few steps of preparation, you can start assessing the resistance between H, W, L terminals.
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
-
Texas Instruments DAC8560EVM (Rev. A) User guide
-
-
-
-
-
-
-
-
-