HQ Power VLP16B/GU10 User manual

Page is loading ...

VLP16B/GU10 - VLP16C/GU10

V. 01 – 22/10/2013 2 ©Velleman nv

USER MANUAL

1. Introduction

To all residents of the European Union

Important environmental information about this product

This symbol on the device or the package indicates that disposal of the device after its lifecycle

could harm the environment. Do not dispose of the unit (or batteries) as unsorted municipal

waste; it should be taken to a specialized company for recycling. This device should be

returned to your distributor or to a local recycling service. Respect the local environmental

rules.

If in doubt, contact your local waste disposal authorities.

Thank you for choosing HQPower™! Please read the manual thoroughly before bringing this device into

service. If the device was damaged in transit, don't install or use it and contact your dealer.

2. Safety Instructions

Keep this device away from children and unauthorized users.

Indoor use only. Keep this device away from rain, moisture, splashing and dripping

liquids.

Be very careful during the installation: touching live wires can cause life-threatening

electroshocks.

Do not touch the device during operation as the housing heats up.

Do not stare directly at the light source, as this may cause

• epileptic seizure in sensitive people

• temporarily loss of sight (flash blindness)

• permanent (irreversible) eye damage.

• Always disconnect mains power when device not in use or when servicing or maintenance activities

are performed. Handle the power cord by the plug only.

• This device falls under protection class I. It is therefore essential that the device be earthed. Have a

qualified person carry out the electric connection.

• Make sure that the available voltage does not exceed the voltage stated in the specifications of this

manual.

• Do not crimp the power cord and protect it against damage. Have an authorised dealer replace it if

necessary.

• Respect a minimum distance of 1 m between the device’s light output and any illuminated surface.

• Use an appropriate safety cable to fix the device (e.g. VDLSC7N or VDLSC8N).

3. General Guidelines

Refer to the Velleman® Service and Quality Warranty on the last pages of this manual.

• Familiarise yourself with the functions of the device before actually using it. Do not allow operation

by unqualified people. Any damage that may occur will most probably be due to unprofessional use

of the device.

• All modifications of the device are forbidden for safety reasons. Damage caused by user modifications

to the device is not covered by the warranty.

• Only use the device for its intended purpose. All other uses may lead to short circuits, burns,

electroshocks, lamp explosion, crash, etc. Using the device in an unauthorised way will void the

warranty.

• Damage caused by disregard of certain guidelines in this manual is not covered by the warranty and

the dealer will not accept responsibility for any ensuing defects or problems.

VLP16B/GU10 - VLP16C/GU10

V. 01 – 22/10/2013 3 ©Velleman nv

• A qualified technician should install and service this device.

• Do not switch the device on immediately after it has been exposed to changes in temperature.

Protect the device against damage by leaving it switched off until it has reached room temperature.

• This device is designed for professional use on stage, in discos, theatres, etc. The device should only

be used indoors with the appropriate current and power supply (see Technical Specifications).

• Lighting effects are not designed for permanent operation: regular operation breaks will prolong their

lives.

• There may be a particular smell when the device is activated for the first time. This is normal and

any smell will gradually disappear.

• Do not connect the device to a dimming pack, even if the dimmer channel is used solely for 0% to

100% switch.

• Use the original packaging if the device is to be transported.

• Keep this manual for future reference.

4. Features

• lightweight aluminium construction

• for 50 W / 230 V lamp

• with power cable with plug

5. Installation

Lamp

• Only fit or replace a lamp when the device is unplugged from the mains.

• Let a lamp cool down before replacing it as the temperature of a lamp can reach 700°C during

operation.

• When handling a halogen lamp, do not touch it with your bare hands. Use a cloth to insert or remove

it.

• Do not install lamps with a higher wattage. They get hotter than this device was designed for.

• Do not operate the device as long as the lamp is not securely fastened or the cover still opened.

• Replace any deformed or damaged lamp with a lamp of the same type (see Technical Specifications).

To replace the lamp:

1. Pull the extension spring and open the housing.

2. Remove the old and insert a new one.

3. Fix the socket and close the device.

Mounting guidelines

• Have the device installed by a qualified person, respecting EN 60598-2-17 and all other applicable

norms.

• The construction to which the device is attached should be able to support 10 times the weight of the

device for one hour without deformation.

• The installation must always be secured with a secondary attachment e.g. a safety cable.

• Never stand directly below the device when it is being mounted, removed or serviced.

• Have a qualified technician check the device once a year and once before you bring it into service.

• Install the device in a location with few passers-by that is inaccessible to unauthorised persons.

• Overhead mounting requires extensive experience: calculating work load limits, determining the

installation material to be used. Have the material and the device itself checked regularly. Do not

attempt to install the device yourself if you lack these qualifications as improper installation may

result in injuries.

• Make sure there is no flammable material within a 0.5 m radius of the device.

• Connect the device to the mains with the power plug.

• The installation has to be approved by an expert before the device is taken into service.

6. Cleaning and Maintenance

• Disconnect the device from the mains prior to maintenance activities. Let the device cool down.

VLP16B/GU10 - VLP16C/GU10

V. 01 – 22/10/2013 4 ©Velleman nv

• All screws should be tightened and free of corrosion.

• The housing, visible parts, mounting supports and the installation location (e.g. ceiling, suspension,

trussing) should not be deformed, modified or tampered with e.g. do not drill extra holes in mounting

supports, do not change the location of the connections...

• Mechanically moving parts must not show any signs of wear and tear.

• The electric power supply cables must not show any damage. Have a qualified technician maintain

the device.

• Wipe the device regularly with a moist, lint-free cloth. Do not use alcohol or solvents.

• There are no user-serviceable parts apart from the lamp.

• Contact your dealer for spare parts if necessary.

7. Technical Specifications

power supply 230 Vac

lamp socket

GU10

dimensions

Ø 90 x 185 mm

lamp (not incl.)

HQ Power LHALGU1050

available body colours

black VLP16B/GU10

chrome VLP16C/GU10

Use this device with original accessories only. Velleman nv cannot be held responsible in the

event of damage or injury resulting from (incorrect) use of this device.

For more info concerning this product and the latest version of this manual, please visit our

website www.hqpower.eu.

The information in this manual is subject to change without prior notice.

The copyright to this manual is owned by Velleman nv. All worldwide rights reserved. No part

of this manual may be copied, reproduced, translated or reduced to any electronic medium or otherwise

without the prior written consent of the copyright holder.

Page is loading ...

Velleman® Service and Quality Warranty

Since its foundation in 1972, Velleman® acquired extensive experience in

the electronics world and currently distributes its products in over 85

countries.

All our products fulfil strict quality requirements and legal stipulations in

the EU. In order to ensure the quality, our products regularly go through

an extra quality check, both by an internal quality department and by

specialized external organisations. If, all precautionary measures

notwithstanding, problems should occur, please make appeal to our

warranty (see guarantee conditions).

General Warranty Conditions Concerning Consumer Products (for

EU):

• All consumer products are subject to a 24-month warranty on production

flaws and defective material as from the original date of purchase.

• Velleman® can decide to replace an article with an equivalent article, or

to refund the retail value totally or partially when the complaint is valid and

a free repair or replacement of the article is impossible, or if the expenses

are out of proportion.

You will be delivered a replacing article or a refund at the value of 100%

of the purchase price in case of a flaw occurred in the first year after the

date of purchase and delivery, or a replacing article at 50% of the

purchase price or a refund at the value of 50% of the retail value in case

of a flaw occurred in the second year after the date of purchase and

delivery.

• Not covered by warranty:

- all direct or indirect damage caused after delivery to the article (e.g. by

oxidation, shocks, falls, dust, dirt, humidity...), and by the article, as well

as its contents (e.g. data loss), compensation for loss of profits;

- consumable goods, parts or accessories that are subject to an aging

process during normal use, such as batteries (rechargeable, non-

rechargeable, built-in or replaceable), lamps, rubber parts, drive belts...

(unlimited list);

- flaws resulting from fire, water damage, lightning, accident, natural

disaster, etc.…;

- flaws caused deliberately, negligently or resulting from improper

handling, negligent maintenance, abusive use or use contrary to the

manufacturer’s instructions;

- damage caused by a commercial, professional or collective use of the

article (the warranty validity will be reduced to six (6) months when the

article is used professionally);

- damage resulting from an inappropriate packing and shipping of the

article;

- all damage caused by modification, repair or alteration performed by a

third party without written permission by Velleman®.

• Articles to be repaired must be delivered to your Velleman® dealer,

solidly packed (preferably in the original packaging), and be completed

with the original receipt of purchase and a clear flaw description.

• Hint: In order to save on cost and time, please reread the manual and

check if the flaw is caused by obvious causes prior to presenting the

article for repair. Note that returning a non-defective article can also

involve handling costs.

• Repairs occurring after warranty expiration are subject to shipping costs.

• The above conditions are without prejudice to all commercial warranties.

The above enumeration is subject to modification according to the

article (see article’s manual).

Velleman® service- en kwaliteitsgarantie

Velleman® heeft sinds zijn oprichting in 1972 een ruime ervaring

opgebouwd in de elektronicawereld en verdeelt op dit moment producten

in meer dan 85 landen. Al onze producten beantwoorden aan strikte

kwaliteitseisen en aan de wettelijke bepalingen geldig in de EU. Om de

kwaliteit te waarborgen, ondergaan onze producten op regelmatige

tijdstippen een extra kwaliteitscontrole, zowel door onze eigen

kwaliteitsafdeling als door externe gespecialiseerde organisaties. Mocht

er ondanks deze voorzorgen toch een probleem optreden, dan kunt u

steeds een beroep doen op onze waarborg (zie waarborgvoorwaarden).

Algemene waarborgvoorwaarden consumentengoederen (voor

Europese Unie):

• Op alle consumentengoederen geldt een garantieperiode van 24

maanden op productie- en materiaalfouten en dit vanaf de oorspronkelijke

aankoopdatum.

• Indien de klacht gegrond is en een gratis reparatie of vervanging van

een artikel onmogelijk is of indien de kosten hiervoor buiten verhouding

zijn, kan Velleman® beslissen het desbetreffende artikel te vervangen

door een gelijkwaardig artikel of de aankoopsom van het artikel

gedeeltelijk of volledig terug te betalen. In dat geval krijgt u een

vervangend product of terugbetaling ter waarde van 100% van de

aankoopsom bij ontdekking van een gebrek tot één jaar na aankoop en

levering, of een vervangend product tegen 50% van de kostprijs of

terugbetaling van 50 % bij ontdekking na één jaar tot 2 jaar.

• Valt niet onder waarborg:

- alle rechtstreekse of onrechtstreekse schade na de levering veroorzaakt

aan het toestel (bv. door oxidatie, schokken, val, stof, vuil, vocht...), en

door het toestel, alsook zijn inhoud (bv. verlies van data), vergoeding voor

eventuele winstderving.

- verbruiksgoederen, onderdelen of hulpstukken die onderhevig zijn aan

veroudering door normaal gebruik zoals bv. batterijen (zowel oplaadbare

als niet-oplaadbare, ingebouwd of vervangbaar), lampen, rubberen

onderdelen, aandrijfriemen... (onbeperkte lijst).

- defecten ten gevolge van brand, waterschade, bliksem, ongevallen,

natuurrampen, enz.

- defecten veroorzaakt door opzet, nalatigheid of door een

onoordeelkundige behandeling, slecht onderhoud of abnormaal gebruik of

gebruik van het toestel strijdig met de voorschriften van de fabrikant.

- schade ten gevolge van een commercieel, professioneel of collectief

gebruik van het apparaat (bij professioneel gebruik wordt de

garantieperiode herleid tot 6 maand).

- schade veroorzaakt door onvoldoende bescherming bij transport van het

apparaat.

- alle schade door wijzigingen, reparaties of modificaties uitgevoerd door

derden zonder toestemming van Velleman®.

• Toestellen dienen ter reparatie aangeboden te worden bij uw

Velleman®-verdeler. Het toestel dient vergezeld te zijn van het

oorspronkelijke aankoopbewijs. Zorg voor een degelijke verpakking (bij

voorkeur de originele verpakking) en voeg een duidelijke foutomschrijving

bij.

• Tip: alvorens het toestel voor reparatie aan te bieden, kijk nog eens na

of er geen voor de hand liggende reden is waarom het toestel niet naar

behoren werkt (zie handleiding). Op deze wijze kunt u kosten en tijd

besparen. Denk eraan dat er ook voor niet-defecte toestellen een kost

voor controle aangerekend kan worden.

• Bij reparaties buiten de waarborgperiode zullen transportkosten

aangerekend worden.

• Elke commerciële garantie laat deze rechten onverminderd.

Bovenstaande opsomming kan eventueel aangepast worden

naargelang de aard van het product (zie handleiding van het

betreffende product).

Garantie de service et de qualité Velleman®

Depuis 1972, Velleman® a gagné une vaste expérience dans le secteur

de l’électronique et est actuellement distributeur dans plus de 85 pays.

Tous nos produits répondent à des exigences de qualité rigoureuses et à

des dispositions légales en vigueur dans l’UE. Afin de garantir la qualité,

nous soumettons régulièrement nos produits à des contrôles de qualité

supplémentaires, tant par notre propre service qualité que par un service

qualité externe. Dans le cas improbable d’un défaut malgré toutes les

précautions, il est possible d’invoquer notre garantie (voir les conditions

de garantie).

Conditions générales concernant la garantie sur les produits grand

public (pour l’UE) :

• tout produit grand public est garanti 24 mois contre tout vice de

production ou de matériaux à dater du jour d’acquisition effective ;

• si la plainte est justifiée et que la réparation ou le remplacement d’un

article est jugé impossible, ou lorsque les coûts s’avèrent

disproportionnés, Velleman® s’autorise à remplacer ledit article par un

article équivalent ou à rembourser la totalité ou une partie du prix d’achat.

Le cas échéant, il vous sera consenti un article de remplacement ou le

remboursement complet du prix d’achat lors d’un défaut dans un délai de

1 an après l’achat et la livraison, ou un article de remplacement

moyennant 50% du prix d’achat ou le remboursement de 50% du prix

d’achat lors d’un défaut après 1 à 2 ans.

• sont par conséquent exclus :

- tout dommage direct ou indirect survenu à l’article après livraison (p.ex.

dommage lié à l’oxydation, choc, chute, poussière, sable, impureté…) et

provoqué par l’appareil, ainsi que son contenu (p.ex. perte de données) et

une indemnisation éventuelle pour perte de revenus ;

- toute pièce ou accessoire nécessitant un remplacement causé par un

usage normal comme p.ex. piles (rechargeables comme non

rechargeables, intégrées ou remplaçables), ampoules, pièces en

caoutchouc, courroies… (liste illimitée) ;

- tout dommage qui résulte d’un incendie, de la foudre, d’un accident,

d’une catastrophe naturelle, etc. ;

- out dommage provoqué par une négligence, volontaire ou non, une

utilisation ou un entretien incorrect, ou une utilisation de l’appareil

contraire aux prescriptions du fabricant ;

Page is loading ...

HQ Power VLP16B/GU10 User manual

This manual is also suitable for

HQ Power VLP16B/GU10 User manual

in other languages

Related papers

Other documents