Intermec PF8D User manual

Category
Software
Type
User manual
EasyLAN
Users Guide
Intermec Technologies Corporation
Worldwide Headquarters
6001 36th Ave. W.
Everett, WA 98203
U.S.A.
www.intermec.com
e information contained herein is provided solely for the purpose of allowing
customers to operate and service Intermec-manufactured equipment and is
not to be released, reproduced, or used for any other purpose without written
permission of Intermec Technologies Corporation.
Information and specifi cations contained in this document are subject to
change without prior notice and do not represent a commitment on the part of
Intermec Technologies Corporation.
© 2004-2007 by Intermec Technologies Corporation. All rights reserved.
e word Intermec, the Intermec logo, Norand, ArciTech, Beverage Routebook,
CrossBar, dcBrowser, Duratherm, EasyADC, EasyCoder, EasySet, Fingerprint,
INCA (under license), i-gistics, Intellitag, Intellitag Gen2, JANUS, LabelShop,
MobileLAN, Picolink, Ready-to-Work, RoutePower, Sabre, ScanPlus, ShopScan,
Smart Mobile Computing, TE 2000, Trakker Antares, and Vista Powered
are either trademarks or registered trademarks of Intermec Technologies
Corporation.
ere are U.S. and foreign patents as well as U.S. and foreign patents pending.
Microsoft, Windows, and the Windows logo are registered trademarks of
Microsoft Corporation in the United States and/or other countries.
Torx is a registered trademark of Camcar Division of Textron Inc.
is product includes software developed by the OpenSSL Project for use in the
OpenSSL Toolkit (http://www.openssl.org/).
is product includes cryptographic software written by Eric Young (eay@
cryptsoft.com).
EasyLAN Users Guide iii
Document Change Record
is page records changes to this document.  e document was
originally released as version -00.
Version Date Description of Change
-00 5/2003 Original version for Fingerprint v8.00 and IPL v2.00
-01 9/2003 For Fingerprint v8.10 and IPL v2.10
-02 12/2004 For Fingerprint v8.40 and IPL v2.40. Enhanced wireless
security, duplicate IP address handling and DDNS added.
Japan added as regional setting for EasyLAN Wireless.
-03 1/2007 Added information about features that were not previously
documented: Wi-Fi Protected Access (WPA), how to disable
Net1 queuing, and how to close non-printer initiated
TCP connections. Descriptions of the AUTH and ROAM
parameters were also added.
iv EasyLAN User’s Guide
EasyLAN Users Guide v
Contents
Contents
Before You Begin ........................................................................... xi
Safety Information .......................................................... xi
Global Services and Support ........................................... xi
Warranty Information ...................................... xi
Web Support .................................................... xi
Telephone Support .......................................... xii
Who Should Read  is Manual ..................................... xii
Related Documents ...................................................... xiii
1
Introduction ............................................................................... 1
Features and Functions ...................................................................2
Network Connector .........................................................2
Raw TCP .........................................................................2
Alerts ............................................................................... 2
FTP ................................................................................. 2
Security ...........................................................................3
Web Server .....................................................................3
What’s on the CD? .........................................................................4
General ............................................................................4
Documentation ...............................................................4
Firmware .........................................................................4
Software Utilities .............................................................4
2
Setting Up the Printer in Windows ..........................5
Windows 95, 98, and ME ..............................................................6
Prerequisites .....................................................................6
Add a Printer ...................................................................6
Assigning the Printer to a Printer Port..............................8
Windows 2000 and XP ................................................................10
Add a Printer Port ..........................................................10
Add a Printer .................................................................13
Windows NT 4.0 ........................................................................16
Add TCP/IP Printing Service .........................................16
Add a Printer Port ..........................................................19
Add a Printer .................................................................21
vi EasyLAN User’s Guide
Contents
3
Setting Up the Printer in UNIX and Linux .......25
Setting Up the Printer in UNIX ...................................................26
Setting Up the Printer in Linux ....................................................27
4
Using the EasyLAN Web Browser Interface ..... 31
Prerequisites .................................................................................32
Web Browser ................................................................................32
Confi guration ..............................................................................33
Viewing and Changing Printer Settings .........................34
Communication ..............................................34
Media ..............................................................35
Print Engine (Fingerprint only) .......................35
Web Shell (Fingerprint only) ...........................37
Alerts ...............................................................38
Viewing and Changing Network Settings ......................40
General ...........................................................40
SNMP .............................................................44
DDNS ............................................................45
TCP/IP ...........................................................47
Avalanche ........................................................ 49
Wireless LAN ..................................................50
802.1x .............................................................52
Upgrading Firmware ....................................................................54
5
Basic Operations (Fingerprint and IPL) ..............57
Using the EasyLAN FTP Server ...................................................58
Timeout ........................................................................58
User Access Control ......................................................58
Printing Labels (Fingerprint) .........................................59
Creating a Label File........................................59
Printing a Label File ........................................60
Printing Labels (IPL) .....................................................61
Creating a Label File........................................61
Printing a Label File ........................................62
Confi guring the Printer .................................................63
SNMP .........................................................................................63
Password Protection .....................................................................64
Default Settings .............................................................64
EasyLAN Users Guide vii
Contents
Forgotten Passwords ......................................................64
6
Advanced Confi guration ...............................................65
Printer File System (Fingerprint) ..................................................66
Device Tree Structure .....................................................66
Devices and Directories .................................................67
Limitations .....................................................68
Accessing the Printer ....................................................................69
Raw TCP .......................................................................69
Connection Settings ........................................69
Std I/O and Application (Fingerprint only) .....69
TCP Port Number ..........................................69
Connecting .....................................................69
Closing a Connection ......................................70
Server .............................................................. 70
Maximum Connected Clients .........................70
Auto Install .....................................................70
Permissions......................................................70
Anonymous .....................................................70
Password Protected Users ................................71
Timeout ..........................................................71
Client (Fingerprint only) .................................71
Confi gure Printer through Fingerprint .........................................71
prt Section .....................................................................71
alerts Section ................................................................72
lan1 Section ...................................................................72
wlan Section ..................................................................75
8021x Section ................................................................76
Customization (Fingerprint) ........................................................76
Web Style Guide Files ....................................................77
Content of a Web Style Guide File.................................77
Required Environment Variables .....................78
Optional Environment Variables .....................78
x-www-url-Encoding Syntax Rules ..................79
Memory and Storage .......................................79
Creating a Web Style Guide File ....................................80
CGI-Scripts ................................................................................80
Identifying CGI-resources..............................................80
viii EasyLAN Users Guide
Contents
IPP ...............................................................................80
Application Specifi c CGI ...............................................81
Other Files .....................................................................81
Fingerprint CGI-scripting ..............................................81
Fingerprint CGI Commands .........................................82
GETASSOC$ .................................................82
GETASSOCNAME$ ......................................83
MAKEASSOC ................................................ 83
ON HTTP GOTO .........................................84
RESUME HTTP ............................................84
Interrupt .........................................................84
Access to Running Fingerprint Applications ....85
Mail Command ...........................................................................85
SNMP .........................................................................................87
Setting up the Printer for SNMP ...................................87
System Requirements for SNMP ...................................87
Adding Intermec MIBs to NMS Software ......................87
Using Odometer Count1 ...............................................87
Restrict Functionality ...................................................................88
Accounts ........................................................................88
File System ....................................................................88
Restrictions ....................................................................88
Display Current User .....................................................90
Changing User ...............................................................90
Changing Passwords ......................................................91
7
Troubleshooting ................................................................... 93
Diagnostics and Troubleshooting Procedures ................................94
Verifying Settings ...........................................................94
PC Settings ....................................................................94
Printer Settings ..............................................................94
Network Card Not Responding ....................................95
Connection to the Network ............................95
Internal Cabling ..............................................95
Verifying IP Address ......................................................95
Verifying Subnet Mask ...................................................96
Pinging the Printer ........................................................96
EasyLAN Users Guide ix
Contents
A
Glossary .....................................................................................97
B
Technical Specifi cations ...............................................103
x EasyLAN User’s Guide
Before You Begin
EasyLAN Users Guide xi
Before You Begin
Before You Begin
is section provides you with safety information, technical support
information, and sources for additional product information.
Safety Information
Your safety is extremely important. Read and follow all warnings and
cautions in this document before handling and operating Intermec
equipment. You can be seriously injured, and equipment and data can be
damaged if you do not follow the safety warnings and cautions.
is section explains how to identify and understand dangers, warnings,
cautions, and notes that are in this document.
A warning alerts you of an operating procedure, practice,
condition, or statement that must be strictly observed to
avoid death or serious injury to the persons working on the
equipment.
Note: Notes either provide extra information about a topic or
contain special instructions for handling a particular condition
or set of circumstances.
Global Services and Support
Warranty Information
To understand the warranty for your Intermec product, visit the
Intermec web site at www.intermec.com and click Service & Support >
Warranty.
Disclaimer of warranties:  e sample code included in this document
is presented for reference only.  e code does not necessarily represent
complete, tested programs.  e code is provided “as is with all faults.” All
warranties are expressly disclaimed, including the implied warranties of
merchantability and fi tness for a particular purpose.
Web Support
Visit the Intermec web site at www.intermec.com to download our
current manuals (in PDF). To order printed versions of the Intermec
manuals, contact your local Intermec representative or distributor.
Visit the Intermec technical knowledge base (Knowledge Central) at
xii EasyLAN User’s Guide
Before You Begin
intermec.custhelp.com to review technical information or to request
technical support for your Intermec product.
Telephone Support
ese services are available from Intermec:
Services Description
In the USA and Canada
call 1-800-755-5505 and
choose this option
Order Intermec
products
Place an order.
Ask about an existing order.
1 and then choose 2
Order Intermec Media Order printer labels and
ribbons.
1 and then choose 1
Order spare parts Order spare parts. 1 or 2 and then choose 4
Technical Support Talk to technical support about
your Intermec Product.
2 and then choose 2
Service Get a return authorization
number for authorized
service center repair.
Request an on-site repair
technician.
2 and then choose 1
Service contracts Ask about an existing
contract.
Renew a contract.
Inquire about repair billing
or other service invoicing
questions.
1 or 2 and then choose 3
Outside the U.S.A. and Canada, contact your local Intermec
representative. To search for your local representative, from the Intermec
web site, click Contact.
Who Should Read This Manual
is User’s Guide is for the person who is responsible for setting up,
using and maintaing the EasyCoder PF/PM/PX printer equipped with
an EasyLAN network interface.
EasyLAN Users Guide xiii
Before You Begin
Before you work with the EasyLAN network interface, you should be
familiar with your network and general networking terms, such as IP
address.
Related Documents
is table contains a list of related Intermec documents and their part
numbers.
Document Title Part Number
EasyLAN Wireless Kit Installation Instructions
1-960610-XX
Fingerprint Programmers Reference Manual 937-005-XXX
IPL Programmer’s Reference Manual 066396-XXX
e Intermec web site at www.intermec.com contains our documents (as
PDF fi les) that you can download for free.
To download documents
Visit the Intermec web site at www.intermec.com.
Click Service & Support > Manuals.
In the Select a Product eld, choose the product whose
documentation you want to download.
To order printed versions of the Intermec manuals, contact your local
Intermec representative or distributor.
1
2
3
xiv EasyLAN User’s Guide
Before You Begin
EasyLAN Users Guide 1
e Intermec EasyLAN interface is an optional device
that provides the printer with a network connection.
ere are two types of interface:
• EasyLAN Ethernet
• EasyLAN Wireless
Both interfaces can be either factory installed or fi eld
installed.
1
Introduction
2 EasyLAN User’s Guide
Chapter 1 — Introduction
Features and Functions
e EasyLAN network interface card not only provides a network
interface, but also has features such as security, FTP server, web server,
and Alert handling.
Network Connector
e EasyLAN is designed for 10 Mbps Ethernet and 100 Mbps Fast
Ethernet networks.  e EasyLAN connects to the network with a twisted
pair category 5 cable (10baseT and 100baseTX) or better using RJ-45
connectors, or through a wireless LAN interface using IEEE 802.11b
and 802.11g.  e EasyLAN is equipped with an auto-sensing function
that detects the speed of the local network segment and varies the speed
of its data communication accordingly, between 10 Mbps and 100
Mbps.
Raw TCP
Raw TCP allows a user to connect to printers on the network. Using a
network terminal protocol, such as Telnet, you can start a remote session
by specifying an IP-address to connect to. When connected you can send
commands to the printer from your remote computer.
Alerts
You can confi gure EasyLAN to send alert notifi cations triggered by a
number of events. You can easily select what alerts you should be notifi ed
of and what the messages should include. Alerts can either be distributed
via e-mail or SNMP. For more information about Alerts, see Chapter 4.
FTP
e EasyLAN has a built-in FTP server, which allows you to transfer
and store fi les such as pictures and fonts. You can also print fi les by
sending them directly to the printer. FTP simplifi es confi guration when
addressing multiple printers since you can send premade confi guration
les directly to the printers. You will fi nd more information about FTP
in Chapter 6.
EasyLAN Users Guide 3
Chapter 1 — Introduction
Security
e use of the printer’s internal accounts and passwords are made easier
by the EasyLAN due to the possibilities to confi gure through a Web
interface.
Web Server
e Web server gives you an optional way to confi gure the printer,
through the easy-to-use Web interface accessed via the printers IP
address. For more information about confi guring the printer through the
Web interface, see Chapter 4.
e Web server also gives you the possibility to write your own program
and communicate with it through a Web interface. For more information
about advanced use of the Web Server, consult Chapter 6, “Advanced
Confi guration.
4 EasyLAN User’s Guide
Chapter 1 — Introduction
Whats on the CD?
e EasyLAN CD contains the following programs, fi les, and manuals.
General
• Navigation tool
• Product presentation
• Product profi le
Documentation
Intermec EasyLAN Installation Instructions (Ethernet and Wireless)
Intermec EasyLAN User’s Guide (this manual)
Intermec EasyLAN Setup Wizard Users Guide
Intermec Fingerprint Programmers Reference Manual
Intermec IPL Programming Reference Manual
Firmware
Intermec Fingerprint and IPL printer fi rmware
Software Utilities
Intermec InterDriver with ActiveX Controls
• Intermec PrintSet
Intermec Network Setup wizard
Intermec proprietary MIBs
• dptest.txt (test le for DP/FP)
• ipltest.txt (test le for IPL)
Note:  e most current fi rmware and documentation can
always be found on the Intermec website.
EasyLAN Users Guide 5
2
Setting Up the Printer in
Windows
is section describes how to install the printer in a
Windows environment either through a generic
TCP/IP port or through Intermec Printer Monitor.
Before you can set up the printer in Windows you
must connect the printer to your network as described
in the installation guide provided with the network
interface.
You will need the appropriate printer drivers included
on the CD provided with your printer.
6 EasyLAN User’s Guide
Chapter 2 — Setting Up the Printer in Windows
Windows 95, 98, and ME
Follow the procedure below to add the EasyCoder Printer to a computer
running Windows 95, 98, or Windows ME.
Prerequisites
Use Intermec Print Monitor for network printing in Windows 95, 98,
and ME environments. Install the Intermec Print Monitor software now
if you have not already done so. It is available on the CD provided with
the printer. You will fi nd it in the Software section on the CD.
Add a Printer
1 Select Settings – Printers from the start menu.
2 Double-click the Add Printer button and click Next to continue.
3 Select Local Printer, and click Next to continue.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56
  • Page 57 57
  • Page 58 58
  • Page 59 59
  • Page 60 60
  • Page 61 61
  • Page 62 62
  • Page 63 63
  • Page 64 64
  • Page 65 65
  • Page 66 66
  • Page 67 67
  • Page 68 68
  • Page 69 69
  • Page 70 70
  • Page 71 71
  • Page 72 72
  • Page 73 73
  • Page 74 74
  • Page 75 75
  • Page 76 76
  • Page 77 77
  • Page 78 78
  • Page 79 79
  • Page 80 80
  • Page 81 81
  • Page 82 82
  • Page 83 83
  • Page 84 84
  • Page 85 85
  • Page 86 86
  • Page 87 87
  • Page 88 88
  • Page 89 89
  • Page 90 90
  • Page 91 91
  • Page 92 92
  • Page 93 93
  • Page 94 94
  • Page 95 95
  • Page 96 96
  • Page 97 97
  • Page 98 98
  • Page 99 99
  • Page 100 100
  • Page 101 101
  • Page 102 102
  • Page 103 103
  • Page 104 104
  • Page 105 105
  • Page 106 106
  • Page 107 107
  • Page 108 108
  • Page 109 109
  • Page 110 110
  • Page 111 111
  • Page 112 112
  • Page 113 113
  • Page 114 114
  • Page 115 115
  • Page 116 116
  • Page 117 117
  • Page 118 118
  • Page 119 119
  • Page 120 120
  • Page 121 121

Intermec PF8D User manual

Category
Software
Type
User manual

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI