IEI Integration HDB-301R is a high-quality video capture box that allows you to capture and record high-definition video and audio from a variety of sources. With its compact size and lightweight design, the HDB-301R is perfect for use in a variety of applications, including:
- Live streaming: Capture and stream live video and audio from your computer or other devices to the internet.
- Video conferencing: Connect the HDB-301R to your computer to use it as a high-quality webcam for video conferencing.
- Video recording: Record high-definition video and audio from your computer or other devices to a local hard drive or other storage device.
IEI Integration HDB-301R is a high-quality video capture box that allows you to capture and record high-definition video and audio from a variety of sources. With its compact size and lightweight design, the HDB-301R is perfect for use in a variety of applications, including:
- Live streaming: Capture and stream live video and audio from your computer or other devices to the internet.
- Video conferencing: Connect the HDB-301R to your computer to use it as a high-quality webcam for video conferencing.
- Video recording: Record high-definition video and audio from your computer or other devices to a local hard drive or other storage device.
HDB-301R Firmware Update
Page 1
User Manual
HDB-301R Firmware Update / 韌體更新
MODEL:
HDB-301R
Rev. 1.02 – February 6, 2018
HDB-301R Firmware Update
Page 2
Revision
Date Version Changes
February 6, 2018 1.02 Updated for the latest software tool that is improved to
optimize firmware update process /
韌體新增燒入檢查機制
Added English version /
新增英文版說明
August 24, 2017 1.01 Updated for firmware v2.7.2 /
韌體版本更新為
v2.7.2
June 7, 2017 1.00 Initial Release /
初次發行
HDB-301R Firmware Update
Page 3
Copyright
COPYRIGHT NOTICE / 版權聲明
The information in this document is subject to change without prior notice in order to
improve reliability, design and function and does not represent a commitment on the part
of the manufacturer.
In no event will the manufacturer be liable for direct, indirect, special, incidental, or
consequential damages arising out of the use or inability to use the product or
documentation, even if advised of the possibility of such damages.
This document contains proprietary information protected by copyright. All rights are
reserved. No part of this manual may be reproduced by any mechanical, electronic, or
other means in any form without prior written permission of the manufacturer.
本文件中的內容若有為了要改善文件的可靠性，產品設計和功能而做變更，恕不另行通知。
且本文件包含的資訊並不代表製造商的承諾。
即使客戶被告知可能出現的損害，但是對於因不能使用或無能力使用該產品或說明所產生的
直接，間接，特殊，偶然及後續的損害，製造商不承擔任何責任。
本文件包含的所有信息受版權保護。所有版權歸製造商所有。未經製造商書面授權允許，任
何人不得擅自通過機械，電子或其他手段複製此使用手冊。
TRADEMARKS / 商標
All registered trademarks and product names mentioned herein are used for identification
purposes only and may be trademarks and/or registered trademarks of their respective
owners.
在此提及的所有註冊商標和產品名稱僅供識別之用。商標和/或註冊商標屬於各自的產品。
HDB-301R Firmware Update
Page 4
Manual Conventions
WARNING / 警告
Warnings appear where overlooked details may cause damage to the
equipment or result in personal injury. Warnings should be taken
seriously.
此類訊息內警示的資訊可能導致產品損壞甚或造成人身傷害。請嚴正看待
此類訊息內的警示。
CAUTION / 小心
Cautionary messages should be heeded to help reduce the chance of
losing data or damaging the product.
遵循此類訊息內的指示，能減少遺失資料甚或損壞產品的可能性
。
NOTE / 注意
These messages inform the reader of essential but non-critical
information. These messages should be read carefully as any directions
or instructions contained therein can help avoid making mistakes.
此類訊息包含必要但不一定是緊急的資訊。仔細閱讀裡面的說明或指示能
避免犯錯。
HDB-301R Firmware Update
Page 5
1.1 Firmware Update (English)
To update firmware for theHDB-301R, please follow the steps below.
NOTE：
Firstly, go to IEI official website (http://www.ieiworld.com/) and click
Products Video Capture Box HDB-301R Download.
Download the latest firmware update file:
HDB-301R-update_FW-Vx.x.x_FPGA-Vx.x.x (The 'x' represents
characters which vary from version to version).
Step 1: Connect the HDB-301R to a computer. Confirm the connection in Device
Manager.
Step 2: Unzip the firmware update file downloaded from IEI website. Open the folder
and locate the USB30VB.exe file. Note: Avoid saving the unzipped folder in a
directory whose name contains non-English characters.
Step 3: Double click the USB30VB.exe to open.
HDB-301R Firmware Update
Page 6
WARNING！
Please follow the procedures described below
to perform firmware
update. Do not disconnect the USB 3.0 cable during the update
process unless told to do so. Disconnecting the USB 3.0 cable can
cause power interruption and may lead
to firmware update failure or
device damage.
If you have any questions, please contact IEI customer service.
Step 4: Click Update FW/FPGA to start updating firmware and FPGA.
Step 5: The program starts to update the firmware. The green bar on the screen
indicates the update progress.
HDB-301R Firmware Update
Page 7
Step 6: When the update is finished, the following message window appears. Please
unplug the connection between the HDB-301R and the computer, and plug it in
again. Then, click OK to close the pop-up window.
HDB-301R Firmware Update
Page 8
Step 7: The firmware update program allows users to obtain the current firmware and
FPGA version.
Click Get Firmware version: the firmware version will be listed above.
Click Get FPGA version: the FPGA version will be listed above. Step 0:
HDB-301R Firmware Update
Page 9
1.2
韌體更新
(
中文
)
請依照以下步驟更新 HDB-301R 韌體：
注意：
請先至 IEI 官網（http://www.ieiworld.com/），點 選 產品 影像擷取盒
HDB-301R Download，找到並下載最新的韌體安裝包：
HDB-301R-update_FW-Vx.x.x_FPGA-Vx.x.x（檔名內的 x 將會隨著軟
體版號不同而有所變更）。
Step 1: 請於電腦接上 HDB-301R 裝置，並透過裝置管理員來確認 HDB-301R 已連接。
Step 2: 解壓縮於網站下載的韌體安裝包，然後開啟解壓縮檔案的資料夾。注意：解壓縮
後的資料夾的完整路徑建議均使用英文命名。
Step 3: 找到並執行 USB30VB.exe 程式。
HDB-301R Firmware Update
Page 10
警告！
請依照更新說明操作。韌體更新過程中，請勿拔除 USB 3.0 連接線！
若拔除 USB 3.0 連接線導致電源中斷，可能使韌體更新失敗，造成
HDB-301R 無回應或者需要維修。
若有任何問題或需要協助，請聯繫 IEI 客服人員為您處理。
Step 4: 點擊 Update FW/FPGA 開始更新韌體與 FPGA。
Step 5: 使用者可從以下畫面的綠色更新條，瞭解韌體更新狀態。
HDB-301R Firmware Update
Page 11
Step 6: 韌體更新完成後，會出現以下對話方塊。請先拔除再重新插入 USB 3.0 連接線，
並點擊確定。
HDB-301R Firmware Update
Page 12
Step 7: 使用者可透過此韌體更新程式取得目前的韌體/FPGA 版本：
點選 Get Firmware version，韌體版本號會顯示於上方狀態框中；
點選 Get FPGA version，FPGA 版本號會顯示於上方狀態框中。Step 0:
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10
-
11
-
12
IEI Integration HDB-301R is a high-quality video capture box that allows you to capture and record high-definition video and audio from a variety of sources. With its compact size and lightweight design, the HDB-301R is perfect for use in a variety of applications, including:
- Live streaming: Capture and stream live video and audio from your computer or other devices to the internet.
- Video conferencing: Connect the HDB-301R to your computer to use it as a high-quality webcam for video conferencing.
- Video recording: Record high-definition video and audio from your computer or other devices to a local hard drive or other storage device.
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Other documents
-
Acson A5WM 10G User manual
-
-
McQuay A08019025673 Installation guide
-
Datalogic QS65-1030000R Datasheet
-
Microchip Technology MM7150 User manual
-
Sioux Tools SRW07-38 Operating instructions
-
Canon imagePROGRAF IPF8000S Owner's manual
-
Roland F-120R (Blankt Rött) User guide
-
-
Gigabyte GV-N96GMC-512H User manual