Moen WEYMOUTHSPABN Dimensions Guide

Moen
Brand
Moen
Model
WEYMOUTHSPABN
Category
Sanitary ware
Type
Dimensions Guide

This manual is also suitable for

FINISHED
WALL LINE
Max thickness:
2” if mounting into a stud
1-1/4” if mounting
w/toggle bolts
30-5/8"
(778mm)
Vacuum
Breaker
#A714
8" (203mm)
Spray Wand Height
Drop ell sold
separately
Hole Size
5/8" (17mm)
2" (51mm)
4/11
Weymouth™
Single Function Handshower
with Slidebar
Models: S12107EP series
DESCRIPTION
• Various finishes identified by suffix
• Handheld shower
• 69" double interlock spiral hose (metal)
• Vacuum breaker
• 30" slide bar with push button height selection
OPERATION
• Single function
• Handshower holder rotates to adjust angle of handshower
FLOW
• Designed to deliver 1.75 gpm (6.6 L/min) at 80 psi
STANDARDS
• Designed and manufactured to comply with the applicable
re quire ments of CSA B-125.1, ASME A112.18.1 and ASSE 1014
and all applicable specifications referenced therein
WARRANTY
• Lifetime limited warranty against material or manufacturing defects
CRITICAL DIMENSIONS
(DO NOT SCALE)
Spec i fi ca tions
FOR MORE INFORMATION CALL: 1-800-BUY-MOEN
www.moen.com
Specifications
DESCRIPTION
• Metal spray face and shell
• Brass swivel ball assembly
• Available in various nishes identied by sux
OPERATION
• Self pressurizing design that provides strong performance regard-
less of line pressure
• Two function, rain and rinse: operate lever to select
FLOW
• 2.5 gpm max. (9.5 L/min) max
• EP sux models are limited to 2.0 gpm (7.6 L/min) max for products
manufactured prior to June 30, 2018. EP sux models manufac-
tured after June 30, 2018 are limited to 1.75 gpm (6.7 L/min) max.
STANDARDS
• Third party certied to ASME A112.18.1/CSA B125.1, and all applica-
ble requirements referenced therein
WARRANTY
• Lifetime limited warranty against leaks, drips and nish defects to
the original homeowner
• 10 year limited warranty when used in a multifamily installation
• 5 year limited warranty when used in a commercial installation
Visit www.moen.com/support for complete details and limitations
9" Two Function Rainshower
(Showerhead Only)
Models: S1311 series
FOR MORE INFORMATION CALL: 1-800-BUY-MOEN
www.moen.com
CRITICAL DIMENSIONS
(DO NOT SCALE)
Rev. 12/17
8-1/2"
(216mm)
3 - 1/8"
(79mm)
EP Sux Models Only
S1311EP, S1311EPBN,
S1311EPORB
CRITICAL DIMENSIONS
(DO NOT SCALE)
Single Function Body Spray
Models: TS1322 series
Rough-In: S1300
1" Extension Kit: 155656
(available separately)
DIA.
5-3/8"
(137mm)
3-1/4"
(83mm)
4-1/8"± 3/8"
1/2"
(13mm)
HOLE SIZE
4-5/8" DIA. MAX
(117mm) DIA. MAX
1 9 4 3 06 05 6 03 2 0B 6 8 7 A
FOR MORE INFORMATION CALL: 1-800-BUY-MOEN
www.moen.com
DESCRIPTION
• Single function spray with various finishes identified by suffix
• Immersion technology
OPERATION
• Spray face tilts 20 degrees in any direction
FLOW
• Designed to deliver 2.0 gpm max (7.6 L/min) at 80 psi
STANDARDS
• Third party certified to ASME A112.18.1/ CSA B125.1, and all
applicable requirements referenced therein
WARRANTY
• Lifetime limited warranty against leaks and finish defects to the
original consumer purchaser
• 5 year warranty if used in commercial installations
Rev. 6/11
WEYMOUTH
™
3/4” Thermostatic Shower Trim
Models: TS32110 series - Valve Trim only
TS32112 series - Shower Trim only
Valve Models: S3371, S3600
(sold separately)
Rev. 8/11
2-11/16"
(68mm)
9 - 3/16"
(233mm)
2-1/8"
(54mm)
Wall Opening
5-1/4"
(133mm)
Wall Opening
8" (203mm)
6” (153mm) MIN
FINISHED WALL LINE
7-5/16"
(186mm)
CRITICAL DIMENSIONS
(DO NOT SCALE)
1 9 4 3 06 05 6 03 2 0B 6 8 7 A
FOR MORE INFORMATION CALL: 1-800-BUY-MOEN
www.moen.com
FAUCET DESCRIPTION
• Metal construction with various finishes identified by suffix
• Includes 9” rainshower showerhead, arm and flange
• For use with S3371, 3/4” thermostatic valve and S3600, volume
control valve
OPERATION
• Flow lever operates counterclockwise through a 90° arc with
shut off at 6 o’clock and maximum flow at the 3 o’clock position.
Shut off in clockwise direction
• Temperature lever operates through a 340° arc with maximum cold
at full clockwise rotation and maximum hot at full counterclockwise
rotation
• Safety stop preset temperature at 105°F (41°C)
• Safety stop override allows maximum temperature at 120°F (49°C)
• Factory established temperature range from 70°F (21°C) to 120°F (49°C)
• Shower: Two function, rain and rinse: operate lever to select
FLOW
• Showerhead is limited to 2.5 gpm (9.5 L/min) at 80 psi
CARTRIDGE
• 130156 thermostatic cartridge design with
non metallic/nonferrous materials
• 130157 volume ceramic disc cartridge design
STANDARDS
• Third party certified to: ASME A112.18./CSA B-125.1,
ASSE1016 and all applicable requirements referenced therein
• ADA for lever handle
WARRANTY
• Lifetime limited warranty against leaks, drips and finish defects to the
original consumer purchaser
• 5 year warranty if used in commercial installations
CRITICAL DIMENSIONS
(DO NOT SCALE)
1 9 4 3 06 05 6 03 2 0B 6 8 7 A
FOR MORE INFORMATION CALL: 1-800-BUY-MOEN
www.moen.com
DROP ELL
Models: A725 series
DESCRIPTION
• Metal construction with various finishes identified by suffix
WARRANTY
• Warranted for one year against material
or manufacturing defects
BACK VIEW SIDE VIEW
BEFORE 6/1/2011
1/2-14 NPT
1/2-14
NPSL THREAD
3/8" (10mm)
Extended Pipe
1" (25mm) Minimum
Diameter Hole
Finished
Wall Surface
Pipe (Not Included)
1.85"
(47mm)
2.125"
(54mm)
1/2-14 NPT
1/2-14
NPSL THREAD
3/8" (10mm)
1" (25mm) Minimum
Diameter Hole
Finished
Wall Surface
Pipe (Not Included)
2" (51mm)
2-3/8"
(60mm)
Rev. 9/11
14"
(356mm)
2-1/4"
(57mm)
Finished
Wall Line
6-1/8"
(156mm)
DESCRIPTION
• Metal construction with various finishes identified by suffix
STANDARDS
• Third party certified to CSA B125, ASME A112.18.1, ANSI A117.1,
ASSE 1016, and all applicable requirements referenced therein
WARRANTY
• Lifetime limited warranty against leaks, drips and finish defects to
the original consumer purchaser
• 5 year warranty if used in commercial installations
CRITICAL DIMENSIONS
(DO NOT SCALE)
FOR MORE INFORMATION CALL: 1-800-BUY-MOEN
www.moen.com
Spec i fi ca tions
CRITICAL DIMENSIONS
(DO NOT SCALE)
Rev. 3/11
Shower Arm and Flange
Model: S113 series
CRITICAL DIMENSIONS
(DO NOT SCALE)
1 9 4 3 06 05 6 03 2 0B 6 8 7 A
FOR MORE INFORMATION CALL: 1-800-BUY-MOEN
www.moen.com
3" (76mm)
3/16" (5mm)
TYP
3/4" (19mm)
Plaster Ground
Plastic Tub/Shower
Surround
4-1/2"
(114mm)
Wall Opening
2-3/4" (70mm) -
3-1/2" (89mm)
4-3/8" (111mm)
Max Depth w/Extension Kit
Finished
Wall Line
2-1/4" (57mm)
Max Wall
Thickness
3/4" (19mm)
5-1/4"
(133mm)
Wall Opening
ExactTemp®
3/4” Thermostatic Valve
Model: S3371
Rev. 4/13
DESCRIPTION
• Brass construction
• 3/4" IPS connections
• Thermostatic valve design with integral checkstops
• 18 gpm @ 60 psi
OPERATION
• Temperature lever operates through a 340 degree arc with maximum
cold at full clockwise rotation and maximum hot at full
counterclockwise rotation
• Safety stop preset temperature at 105 degrees F ( 41degrees C)
• Safety stop override allows maximum temperature at 120 degrees F
(49 degrees C)
• Factory established temperature range from 80 degrees F (27 degrees
C) to 120 degrees F (49 degrees C)
• Must be used with at least one S3600 valve.
CARTRIDGE
• Thermostatic cartridge design with non metallic/nonferrous materials
STANDARDS
• Third party certified to meet ASME A112.18.1/CSA B-125.1, CSA
B125.3, ASSE 1016, ASSE 1070 and all applicable requirements
referenced therein
WARRANTY
• Lifetime limited warranty against leaks, drips and finish defects to the
original consumer purchaser
• 5 year warranty if used in commercial installations
5-7/8"
(149mm)
Thin Wall
Thick Wall
CRITICAL DIMENSIONS
(DO NOT SCALE)
Body Spray Rough-In
Model: S1300
3-1/4" ± 3/8"
(82mm ± 10mm)
CONNECTOR
TO FINISHED WALL
DIA.
4-1/2" (114mm)
PLASTER GROUND
2-1/2" ± 3/8"
(63mm ± 10mm)
BRACKET
TO FINISHED WALL
HOLE SIZE
4-5/8" DIA. MAX.
(117mm) DIA. MAX.
8-1/2"
(216mm)
1/2" CC/NPT
1/2" CC/NPT
Spec i fi ca tions
FOR MORE INFORMATION CALL: 1-800-BUY-MOEN
www.moen.com
DESCRIPTION
• Metal construction
• 1/2" CC and IPS connections
• Includes mounting bracket and test plug
STANDARDS
• Third party certified to ASME A112.18.1/ CSA B125.1,
and all applicable requirements referenced therein
WARRANTY
• Lifetime limited warranty against leaks to the original
consumer purchaser
• 5 year warranty if used in commercial installations
3/4"
(19mm)
2-1/8"
(54mm)
Wall Opening
Finished Wall Line
2-1/4" (57mm)
Max Wall Thickness
2-3/4" (70mm) -
3-1/2" (89mm)
4-3/4" (111mm)
Max Depth with
Extension Kit
3/4"
(19mm)
3/16"
(5mm)
TYP
Plastic Tub/Shower
Surround
3" (76mm)
2-1/8"
(54mm)
Wall Opening
FOR MORE INFORMATION CALL: 1-800-BUY-MOEN
www.moen.com
CRITICAL DIMENSIONS
(DO NOT SCALE)
1 9 4 3 06 05 6 03 2 0B 6 8 7 A
3/4” Volume Control Valve
Model: S3600
DESCRIPTION
• Brass construction
• 3/4" IPS connections
• 13 gpm @ 60 psi
OPERATION
• Flow lever operates counterclockwise through a 90˚ arc with
off at 6 o’clock and maximum flow at the 3 o’clock position.
Shut off in clockwise direction
CARTRIDGE
• Ceramic disc cartridge design
INSTALLATION
• Volume control valve must be installed with the arrow pointing
in the water flow direction
STANDARDS
• Third party certified to meet CSA B-125.1, ASME A112.18.1 and
all applicable requirements referenced therein including
ASSE1016
WARRANTY
• Lifetime limited warranty against leaks, drips and finish defects
to the original consumer purchaser
• 5 year warranty if used in commercial installations
Rev. 4/13
Thin Wall
Thick Wall
2-3/4"
(70mm)
WEYMOUTH
™
Single Function Flow Valve Trim
Models: TS52104 series
Valve: S3600 (sold separately)
DESCRIPTION
• Metal construction with various finishes identified by suffix
• For use with S3600 3/4" volume control valve
OPERATION
• Lever style handle operation
STANDARDS
• Third party certified to meet ASME A112.18.1/CSA B125.1, and all
applicable requirements referenced therein
• ADA for lever handle
WARRANTY
• Lifetime limited warranty against leaks, drips and finish defects to
the original consumer purchaser
• 5 year warranty if used in commercial installations
4/11
2-11/16"
(68mm)
2-1/8"
(54mm)
Wall Opening
3-1/2"
(89mm)
3"
(76mm)
CRITICAL DIMENSIONS
(DO NOT SCALE)
Spec i fi ca tions
FOR MORE INFORMATION CALL: 1-800-BUY-MOEN
www.moen.com
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10

Moen WEYMOUTHSPABN Dimensions Guide

Moen
Brand
Moen
Model
WEYMOUTHSPABN
Category
Sanitary ware
Type
Dimensions Guide
This manual is also suitable for
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents