Moen T2524 User manual

Type
User manual
Specifications
CRITICAL DIMENSIONS
(DO NOT SCALE)
MONTICELLO
®
Single-Handle Shower Trim Only
Models: T2524, T2524CP, T2524P, T2524W
(Packed 1 per carton)
7"(178mm)
ESCUTCHEON
DIAMETER
HOT
INLET
COLD
INLET
FINISHED WALL LINE
FLOOR
L
C
45"-48"
(1143-1219mm)
8"
(203mm)
MIN.
H/A/F
6' - 6"
(1981mm)
NOMINAL
4-1/2" (114mm)
WALL OPENING
1-7/16" (36mm) MIN.
2-3/16" (55mm) MAX.
15/16"
FLOOR
PLASTER
GROUND
2-3/16"
(55mm)
MAX.
15/16"
PLASTIC
TUB/SHOWER
SURROUND
2-1/16"
(52mm)
REF.
3-1/2" (89mm) MAX.
2" (51mm) MIN.
DIAMETER
WALL OPENING
THIN
WALL APPLICATION
THICK WALL APPLICATION
Rev. 6/05
FOR MORE INFORMATION CALL: 1-800-BUY-MOEN
www.moen.com
ADA
FAUCET DESCRIPTION
Metal construction with a chrome plated, LifeShine
®
polished brass or glacier finish
1/2" CC connections
Includes showerhead, arm and flange
OPERATION
Pull-on/push-off design
Lever style handle with optional interchangeable insert
Allows control of both temperature selection and
volume with a single handle
FLOW
Showerhead limited to 2.5 gpm (9.5 L/min)
CARTRIDGE
1225 cartridge design
Nonmetallic/nonferrous and stainless steel materials
Accommodates back to back installations
STANDARDS
Third party certified by CSA to meet CSA B-125,ASME
A112.18.1M and all applicable requirements referenced
therein and complies with the applicable requirements
of ANSI A117.1
WARRANTY
Lifetime limited warranty against leaks, drips and finish
defects to the original consumer purchaser
5 year warranty if used in commercial installations
  • Page 1 1

Moen T2524 User manual

Type
User manual

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI