Moen T2152EPBN-2510-L Dimensions Guide

Type
Dimensions Guide

This manual is also suitable for

Specifications
CRITICAL DIMENSIONS
(DO NOT SCALE)
Rev. 9/10
THIN
WALL APPLICATION
THICK WALL APPLICATION
FOR MORE INFORMATION CALL: 1-800-BUY-MOEN
www.moen.com
ADA
7" (178mm)
ESCUTCHEON
DIAMETER
2" CC (51mm)
1-7/8" IPS (48mm)
MAX WALL
HOT
INLET
COLD
INLET
FINISHED WALL LINE
FACE OF STUD
4-1/2" (114mm) WALL OPENING
FLOOR
45" (1143mm)/
48" (1219mm)-SHOWER
7"
(178mm)
MIN
TUB RIM
6'-6"
(1981mm)
L
C
1-3/8" (35mm)
2-1/2" MAX. (63mm)
1/2" MIN. CC (13mm)
5/8" MIN. IPS (16mm)
FLOOR LINE
1 3/8"
(35mm)
1 1/2"
(38mm)
3/16" (typ) (5mm)
PLASTER GROUND
3-1/2" (89mm) MAX.
2-1/4" (57mm) MIN.
DIAMETER
WALL
OPENING
PLASTIC
TUB/SHOWER
SURROUND
L
C
7-13/16”
(199mm)
3-1/2”
(89mm)
BRANTFORD™ POSI-TEMP
®
Single-Handle Shower (Trim Only)
Models: T2152, T2152BN, T2152ORB
T62152 (Bulk pack -12 per carton)
FAUCET DESCRIPTION
Metal construction with chrome plated, LifeShine®
brushed nickel or oil rubbed bronze finish
Includes showerhead, arm and flange
OPERATION
Handle operates counterclockwise through a 270˚ arc
with off at 6 oclock and maximum hot at the 9 oclock
position. Shut off in clockwise direction
Adjustable temperature limit stop to control maximum
hot water temperature
Pressure balancing mechanism maintains selected
discharge temperature to ± 3°
FLOW
Showerhead limited to 2.5 gpm max. (9.5 L/min)
CARTRIDGE
1222 cartridge design
Nonmetallic/nonferrous and stainless steel materials
Accommodates back to back installations
STANDARDS
Third party certified to meet CSA B-125, ASME
A112.18.1M, ANSI A117.1 and all applicable requirements
referenced therein
WARRANTY
Lifetime limited warranty against leaks, drips and finish
defects to the original consumer purchaser
5 year warranty if used in commercial installations
MPact™ System
CRITICAL DIMENSIONS
(DO NOT SCALE)
Specifications
®
MOEN SPECIFIER SERVICES 1-800-321-8809 Ext. 2158
TUB
SHOWER
FLOOR
1/2" CC
SUPPLY
2-3/4" (70mm) C.C.
4-1/2" (114mm) PLASTER
GROUND SIZE AND
WALL OPENING
2" CC (51mm)
1 7/8" IPS (48mm)
MAX WALL
FINISHED WALL LINE
FACE OF STUD
32" (813mm) - TUB OR
TUB SHOWER
45" (1143mm)/
48" (1219mm) - SHOWER
2 1/2" MAX.
(63mm)
1/2" MIN. CC (13mm)
5/8" MIN. IPS (16mm)
1 3/8"
(35mm)
FLOOR LINE
1 3/8"
(35mm)
L
C
1 1/2"
(38mm)
3/16" (typ) (5mm)
PLASTER GROUND
3-1/2" (89mm) MAX.
2-1/4" (57mm) MIN.
PLASTIC
TUB/SHOWER
SURROUND
DIAMETER
WALL
OPENING
Rev. 3/00
POSI-TEMP
®
VALVE
Pressure-Balancing Valve
Models: 2520 (CC), 2510 (IPS) - Single Pack
62320 (CC), 62300 (IPS) - Bulk Packed
(Bulk packed 12 per carton)
NOTE: See reverse side
for illustrated parts
DESCRIPTION
Brass construction
1/2" CC or IPS connections
Pressure balancing, four port, cycle valve
OPERATION
Adjustable temperature limit stop to control
maximum hot water temperature
Pressure balancing mechanism maintain selected
discharge temperature to ± 2°F
CARTRIDGE
1222 cartridge design
Nonmetallic/nonferrous and stainless steel materials
Accommodates back to back installations
STANDARDS
Third party certified by CSA to meet CSA B-125,
ASME A112.18.1M and all applicable requirements
referenced therein
WARRANTY
Lifetime limited warranty against leaks, drips and
finish defects to the original consumer purchaser
5 year warranty if used in commercial installations
  • Page 1 1
  • Page 2 2

Moen T2152EPBN-2510-L Dimensions Guide

Type
Dimensions Guide
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI