HOW TO APPLY
Before you start simply watch the step-by-step DVD for tips and a
complete guide to waxing techniques. Always do a patch test on a
small area of your skin for possible skin reaction.
It is also advisable to wash and dry the area you’re going to wax to
temporarily remove the body’s natural oils and help the wax stick to
the hairs.
USING SOFT WAX
Put a small amount of soft wax into the heating cup then place the
cup inside the heater. Switch on the unit to melt the wax. Stir thoroughly until the wax
has the same consistency as syrup.
With a spatula apply a thin coat of wax on the hairs to be treated then rub down a
paper strip over the area. Holding the skin taut and pull the paper off in a quick
motion in the opposite direction of hair growth. You may need to soothe the area
before you move on to the next area.
USING HARD WAX
Put one tablet of hard wax into the heating cup then place the cup inside the heater.
Switch the unit to melt the wax. Stir thoroughly until the wax has a smooth, thick
honey-like consistency.
With a spatula apply a thick and even coat of wax in even strips no wider than 1 inch.
Allow the wax to cool on the skin until it is hard but still pliable. Holding the skin taut
and pull the paper off in a quick motion in the opposite direction of hair growth. You
may need to soothe the area before you move on to the next area.