Cembre CAA-M is designed for deep step indenting of aluminum conductors or aluminum alloy conductors. The tool can be used for creating a stable electrical connection on conductors of any shape or stranding format. The user can achieve the best results by following the correct sequence of indenting, starting from the outer to inner positions in case of a through connector, or from the position near the conductor to the position near the palm in case of a lug.
Cembre CAA-M is designed for deep step indenting of aluminum conductors or aluminum alloy conductors. The tool can be used for creating a stable electrical connection on conductors of any shape or stranding format. The user can achieve the best results by following the correct sequence of indenting, starting from the outer to inner positions in case of a through connector, or from the position near the conductor to the position near the palm in case of a lug.
ISTRUZIONI PER L'ESECUZIONE DI
CONNESSIONI ELETTRICHE SU CAVI
IN ALLUMINIO MEDIANTE PUNZONATURA
PROFONDA A SCALINO
1) Dopo aver sguainato e denudato il conduttore, ridurlo ad
una forma rotonda compatta mediante gli appositi acces-
sori prearrotondatori (Fig. 1), che sono destinati ad arro-
tondare ed a portare a misura tutti i conduttori di uguale
sezione, di ogni forma e cordatura.
2) Introdurre il conduttore nel connettore già scelto.
3) Scegliere l a matrice MV... ed il punzone PS 130... correlati
al connettore da comprimere e predisporli sulla testa
oleodinamica.
4)
Procedere alla punzonatura del giunto o del capocorda
seguendo lo schema sotto illustrato dove è stata numerata
la sequenza delle punzonate (Fig. 2).
È molto importante eseguire le punzonature partendo
dall'estremità dei giunti verso l'interno, onde ottenere il
massimo coefficiente di riempimento, che è condizione
indispensabile per realizzare una connessione elettrica
stabile sui cavi in alluminio.
5) Dopo aver eseguito la punzonatura del connettore, riem-
pire gli alveoli di punzonatura con l'apposito mastice con-
tenuto in ogni confezione.
7
8
3
4
8
6
1
FIG. 1
1 4
3
2
1
2
1 - AU 130...
2 - MV...
3 - Conduttore / Conductor
4 - Utensile da compressione / Crimping tool
5 - PS 130 ... / E
6 - Aggancio rapido / Quick release
7 - AC 130-P
8 - UP 130...
5
4
3
2
1
FIG. 2
PS/E
PS/E
04 I 088 I/E
Cembre S.p.A.
Via Serenissima, 9 - 25135 Brescia (ITALIA)
Te lefono: 030 36921
Te lefax: 030 3365766
Casella Postale 392 - 25100 Brescia (Italia)
Cembre Ltd.
Dunton Park
Kingsbury Road, Curdworth - Sutton Coldfield
West Midlands B76 9EE (GREAT BRITAIN)
Tel.: 01675 470440 - Fax: 01675 470220
Cembre S.a.r.l.
22 Avenue Ferdinand de Lesseps
91420 Morangis (FRANCE)
Tél.: 01 60 49 11 90 - Fax: 01 60 49 29 10
B.P. 37 - 91421 Morangis Cédex
Cembre España S.L.
Calle Llanos de Jerez, 2 - P.I. de Coslada
28820 Coslada - Madrid (ESPAÑA)
Te léfono: 91 4852580
Te lefax: 91 4852581
Cembre AS
Fossnes Senter
N-3160 Stokke (NORWAY)
Phone: (47) 33361765
Te lefax: (47) 33361766
Cembre GmbH
Taunusstraße 23
80807 München (DEUTSCHLAND)
Telefon: 089/3580676
Telefax: 089/35806777
Cembre Inc.
Raritan Center Business Park
70 Campus Plaza II
Edison, New Jersey 08837 (USA)
Tel.: (732) 225-7415 - Fax: (732) 225-7414
Web: www.cembre.com
E-mail: [email protected]
1)
After unsheathing and stripping the conductor, reduce it to
a round and compact shape using the pre-rounding die set
appropriate to this conductor size in any shape or stranding
format (
FIG.
1
below
).
2)
Introduce the conductor into the selected connector.
3)
Select the die MV... and the indentor PS 130... appropriate
to
the connector to be crimped and locate them carefully in
the hydraulic press head.
4)
Indent the connector in the sequence shown below ( ).
For a through connector indent the outer positions rst,
followed by the inner positions.
For a lug indent the position near the conductor rst,
followed by the position near the palm.
It is important to follow the sequence shown in order
to
obtain the correct conductor fill coefficient
essential for
producing a stable electrical connection
on
aluminium
conductors.
5)
After indenting the connector, ll the indents with the
compound provided with each connector.
INSTRUCTIONS FOR THE INSTALLATION
OF ELECTRICAL CONNECTORS
ON ALUMINIUM CONDUCTORS
BY DEEP STEP INDENTING
FIG.
2
Cembre Ltd.
Dunton Park
Kingsbury Road, Curdworth - Sutton Coldfield
West Midlands B76 9EB (Great Britain)
Tel.: 01675 470440 - Fax: 01675 470220
E-mail: [email protected]
www.cembre.co.uk
Cembre S.p.A.
Via Serenissima, 9
25135 Brescia (Italia)
Telefono: 030 36921
Telefax: 030 3365766
E-mail: [email protected]
www.cembre.it
Cembre S.a.r.l.
22 Avenue Ferdinand de Lesseps
91420 Morangis (France)
Tél.: 01 60 49 11 90 - Fax: 01 60 49 29 10
B.P. 37 - 91421 Morangis Cédex
E-mail: [email protected]
www.cembre.fr
Cembre España S.L.
Calle Verano, 6 y 8 - P.I. Las Monjas
28850 Torrejón de Ardoz - Madrid (España)
Teléfono: 91 4852580
Telefax: 91 4852581
E-mail: [email protected]
www.cembre.es
Cembre AS
Fossnes Senter
N-3160 Stokke (Norway)
Phone: (47) 33361765
Telefax: (47) 33361766
E-mail: [email protected]
www.cembre.no
Cembre GmbH
Heidemannstraße 166
80939 München (Deutschland)
Telefon: 089/3580676
Telefax: 089/35806777
E-mail: [email protected]
www.cembre.de
Cembre Inc.
Raritan Center Business Park
181 Fieldcrest Avenue
Edison, New Jersey 08837 (USA)
Tel.: (732) 225-7415 - Fax: (732) 225-7414
E-mail: [email protected]
www.cembreinc.com
www.cembre.com
Cembre Ltd.
Dunton Park
Kingsbury Road, Curdworth - Sutton Coldfield
West Midlands B76 9EB (Great Britain)
Tel.: 01675 470440 - Fax: 01675 470220
E-mail: [email protected]
www.cembre.co.uk
Cembre S.p.A.
Via Serenissima, 9
25135 Brescia (Italia)
Telefono: 030 36921
Telefax: 030 3365766
E-mail: [email protected]
www.cembre.it
Cembre S.a.r.l.
22 Avenue Ferdinand de Lesseps
91420 Morangis (France)
Tél.: 01 60 49 11 90 - Fax: 01 60 49 29 10
B.P. 37 - 91421 Morangis Cédex
E-mail: [email protected]
www.cembre.fr
Cembre España S.L.
Calle Verano, 6 y 8 - P.I. Las Monjas
28850 Torrejón de Ardoz - Madrid (España)
Teléfono: 91 4852580
Telefax: 91 4852581
E-mail: [email protected]
www.cembre.es
Cembre AS
Fossnes Senter
N-3160 Stokke (Norway)
Phone: (47) 33361765
Telefax: (47) 33361766
E-mail: [email protected]
www.cembre.no
Cembre GmbH
Heidemannstraße 166
80939 München (Deutschland)
Telefon: 089/3580676
Telefax: 089/35806777
E-mail: [email protected]
www.cembre.de
Cembre Inc.
Raritan Center Business Park
181 Fieldcrest Avenue
Edison, New Jersey 08837 (USA)
Tel.: (732) 225-7415 - Fax: (732) 225-7414
E-mail: [email protected]
www.cembreinc.com
www.cembre.com
Cembre Ltd.
Dunton Park
Kingsbury Road, Curdworth - Sutton Coldfield
West Midlands B76 9EB (Great Britain)
Tel.: 01675 470440 - Fax: 01675 470220
E-mail: [email protected]
www.cembre.co.uk
Cembre S.p.A.
Via Serenissima, 9
25135 Brescia (Italia)
Telefono: 030 36921
Telefax: 030 3365766
E-mail: [email protected]
www.cembre.it
Cembre S.a.r.l.
22 Avenue Ferdinand de Lesseps
91420 Morangis (France)
Tél.: 01 60 49 11 90 - Fax: 01 60 49 29 10
B.P. 37 - 91421 Morangis Cédex
E-mail: [email protected]
www.cembre.fr
Cembre España S.L.
Calle Verano, 6 y 8 - P.I. Las Monjas
28850 Torrejón de Ardoz - Madrid (España)
Teléfono: 91 4852580
Telefax: 91 4852581
E-mail: [email protected]
www.cembre.es
Cembre AS
Fossnes Senter
N-3160 Stokke (Norway)
Phone: (47) 33361765
Telefax: (47) 33361766
E-mail: [email protected]
www.cembre.no
Cembre GmbH
Heidemannstraße 166
80939 München (Deutschland)
Telefon: 089/3580676
Telefax: 089/35806777
E-mail: [email protected]
www.cembre.de
Cembre Inc.
Raritan Center Business Park
181 Fieldcrest Avenue
Edison, New Jersey 08837 (USA)
Tel.: (732) 225-7415 - Fax: (732) 225-7414
E-mail: [email protected]
www.cembreinc.com
www.cembre.com
Cembre Ltd.
Dunton Park
Kingsbury Road, Curdworth - Sutton Coldfield
West Midlands B76 9EB (Great Britain)
Tel.: 01675 470440 - Fax: 01675 470220
E-mail: [email protected]
www.cembre.co.uk
Cembre S.p.A.
Via Serenissima, 9
25135 Brescia (Italia)
Telefono: 030 36921
Telefax: 030 3365766
E-mail: [email protected]
www.cembre.it
Cembre S.a.r.l.
22 Avenue Ferdinand de Lesseps
91420 Morangis (France)
Tél.: 01 60 49 11 90 - Fax: 01 60 49 29 10
B.P. 37 - 91421 Morangis Cédex
E-mail: [email protected]
www.cembre.fr
Cembre España S.L.
Calle Verano, 6 y 8 - P.I. Las Monjas
28850 Torrejón de Ardoz - Madrid (España)
Teléfono: 91 4852580
Telefax: 91 4852581
E-mail: [email protected]
www.cembre.es
Cembre AS
Fossnes Senter
N-3160 Stokke (Norway)
Phone: (47) 33361765
Telefax: (47) 33361766
E-mail: [email protected]
www.cembre.no
Cembre GmbH
Heidemannstraße 166
80939 München (Deutschland)
Telefon: 089/3580676
Telefax: 089/35806777
E-mail: [email protected]
www.cembre.de
Cembre Inc.
Raritan Center Business Park
181 Fieldcrest Avenue
Edison, New Jersey 08837 (USA)
Tel.: (732) 225-7415 - Fax: (732) 225-7414
E-mail: [email protected]
www.cembreinc.com
www.cembre.com
AA MTA
CAA
MTA-C
LA
MTMA
10 - 16
25
35
PS 130-35/E
50 UP 130-50
70
UP 130-70
PS 130-95/E
UP 130-95
95
120
UP 130-120
150 UP 130-150
PS 130-150/E
185
UP 130-185
240 UP 130-240
PS 130-240/E
AC 130-P
20 MV 95 MUA 95 MVC 95
16 MV 35 MUA 35
25 MV 150 MUA 150 MVC 150
32 MV 240 MUA 240 MVC 240
MVM 35
MVM 95
MVM 150
MVM 240
ACCESSORI / ACCESSORIES
UP 130-35
UP 130-25
∅e
INSTALLAZIONE DI CONNETTORI IN ALLUMINIO MEDIANTE PUNZONATURA PROFONDA A SCALINO : MATRICI E ACCESSORI
INSTALLATION OF ALUMINIUM CONNECTORS BY DEEP STEP INDENTING: DIES & ACCESSORIES
300 UP 130-300 MUA 300-3434
➩
➩
➩
➩
➩
➩
➩
➩
Sezione cavo
Conductor section
( mm
2
)
Prearrotondatore
Pre-rounding die set
Punzone
Indentor
Adattatore
inferiore
Lower adaptor
CONNETTORI / CONNECTORS
ACCESSORI
ACCESSORIES
MATRICI
DIES
AU 130-150
AU 130-240
Adattatore
superiore
Upper adaptor
-
1
-
2
Cembre AA-M Operating instructions
- Type
- Operating instructions
Cembre CAA-M is designed for deep step indenting of aluminum conductors or aluminum alloy conductors. The tool can be used for creating a stable electrical connection on conductors of any shape or stranding format. The user can achieve the best results by following the correct sequence of indenting, starting from the outer to inner positions in case of a through connector, or from the position near the conductor to the position near the palm in case of a lug.
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
-
Cembre AD-GW User manual
-
-
-
-
-
-
-
-
-
Other documents
-
Casella Insight V17 Operating instructions
-
Amazonia SC_KINGSLOUNGER Operating instructions
-
-
mothercare MyCarrier™ Front Carrier User guide
-
Stokke Stroller Cup Holder Black User guide
-
Stokke Scoot User guide
-
-
LEDPRO BY NORLUX TIGRUS VIPPBAR 36DOWNLIGHT, SVART Installation guide
-
LEDPRO BY NORLUX TIGRUS 360 D2W DOWNLIGHT, SVART Installation guide
-
