Rollei DF-S310 SE Owner's manual

Page is loading ...

1

Dear customer,

Congratulations on purchasing a high-quality Rollei product. You have

acquired a modern Negative and Slide Scanner with excellent technical

features and respective accessories, which is particularly easy to operate.

Please study this information in detail, observing safety instructions, in

particular.

The scanner comes with a 2-year warranty. You will need the enclosed

warranty card and your sales receipt in the event of the Negative and Slide

Scanner developing a fault. Keep these in a safe place together with the

instruction manual.

Please include the instruction manual when passing on the scanner to a

third

party.

Note:

Only use the scanner for the intended purposes. Where the scanner

has been used for other purposes, resulting in damage, the warranty

shall be invalidated. Injuries and damage to the environment can

also only be avoided if used correctly.

Contents of box

The box contains the following components:

• Film scanner

• Negative Film Holder

• Positive Slide Holder

• 110 Film Holder

• Super 8

• AC/DC adapter

• USB cable

• Cleaning brush

• TV cable

• User Manual

2

Contents

1 Introduction

1 Contents of box

2 Contents

3 1. Safety Instructions

4 2. Description of parts

5 3.

Negative holder loading method

6 4.

Loading Slide

7 5.

Operation Guided

7 5.1 Introduction of Menu

7 5.2 Capture Picture

10

5.3 Operation Guide

11

5.4 How to playback captured picture

12

5.5 Setting Language

12

5.6 Resolution Choosing

13

5.7 Formatting

14

5.8 Connect to computer

15 6. Product Specication

16 7. Declaration

16 8. Disposal

17 9. Conformity

3

1. Safety Instructions

• Do not disassemble this unit.

• Do not touch inner part of the scanner after dropping or other damage

suering.

• Do stop using it if there is any problem with the scanner, such as smoke

or smell while using.

• Do not clean the scanner with alcohol, gasoline, diluent and other

organic solvent.

• Do not use it in many dusts with the damp environment.

• Do not overload the USB connections on your computer to avoid poor

working of the scanner for overloading.

• Please use lms of standard size.

• Cleaning: Please make sure the scanner is clean before using so as to

produce a clean image.

• Non use period: The USB cord or adapter should be unplugged from

the computer or plug seat when the unit is left unused for a long

period of time.

To protect the machine and save energy, 30 minutes without

continuous operation will automatically shut down in the state of

power-on .Press the power button to turn again to normal use.

4

2. Description of parts

Negative Adapter

THIS SIDE UP

Super8 Insert

Please use a clean product, if you use the cleaning brush to clean the

backlight panel.

•

Negative Film Holder

Positive Slide Holder

TV cable

USB cable

Adapter

Film scanner

Super 8

Brush

User Manual

THIS SIDE UP

110 Insert

110 Film Holder

5

3. Negative holder loading method

Hold up the negative toward the light. Face

the right side of the negative to yourself.

Take out negative holder out. Let the side with

“open” logo face yourself, and let the side with “

◄

”logo face down. Open the negative holder,

then place negative into recessed area in the

holder.Close the negative holder and press the

edges so that it locks in place

Insert the negative holder into the slot on the

right side of the lm scanner .

6

4. Loading Slides

Slide: Its light, shade and color of the slide are

exactly as same as original image.

Place the slide into the holder with the glossy

side facing up and the image should be

upright.

To select the desired thickness of the slide

cartridge, push the slider in an up down

motion along the groove.

Thickness selection indicators are located at

the top of the holder.

Hold it in the position as shown in the film

scanner.

Insert the slide holder into the slot on the

right side of the lm scanner.

Insert slides

7

5. Operation Guided

5.1 Introduction of Menu

①

②

③

④

⑤

⑥

⑦

①

Language mode

④

Format

②

USB mode

⑤

Playback mode

③

Capture mode

⑥

Film Type

⑦

Resolution

5.2 Capture Picture

Before scanning please make sure the inner backlight panel is clean.

Note: You can use the provided brush to clean the screen.

8

In main Menu mode press OK/ENTER enter capture mode, then press

Convert/Mode then press OK/Enter the picture would be captured.

Before pressing to capture picture, you can press left button to mirror and

press right button to ip the current picture. And you can press OK button to

set Exposure.

OK/Enter

Convert/Mode

9

Then press Convert/Mode button again back to main menu.

Press left key ,the image position be altered from left to right

Press right key,the image position be altered from up to down

Press ENTER to set exposure compensation

Mirror

Filp

ENTER

10

5.3 Operation Guide

In main menu, press

◄

or

►

, until lm mode ,then press OK/ENTER you can chose

negative(110, 135, 126KPK), slide(110, 135, 126KPK or Super8), B&W(110, 135,

126KPK)

ENTER

11

5.4 How to playback captured picture

In main menu, press

◄

or

►

, until playback mode, press OK/ENTER to the picture

auto-playback mode press again to stop auto playback and you can view captured

pictures manually, you can press

◄

or

►

to view.

press OK/ENTER again enter picture editing mode, you can rotate, delete, exit, save,

and "home" back to main menu.

①

The current picture rotate 90 digree clockwisely

ENTER

①

②

③

④

⑤

⑥

ENTER

12

②

The current picture rotate 90 digree anticlockwisely

③

Deleting the current picture from memory card

④

Exit the submenu edit mode,back

⑤

Saving the current edited picture

⑥

Exit the submenu edit mode,back to scan

5.5 Setting Language

Under main menu mode, press

◄

or

►

until language mode, press OK/ENTER to

chose language, then press

◄

or

►

and OK/ENTER, one of following language can

be set: English, German, Spanish, Portuguese, Italian, Greek, French, Dutch, Polish,

Czech, Hungarian, Swedish, Finnish, Danish and Norwegian

5.6 Resolution Choosing

Under main menu mode , press

◄

or

►

until Resolution mode, press OK/ENTER to

enter into Resolution choosing Mode, you can choose 14M or 22M(interpolation)

ENTER

13

5.7 Formatting

In the main menu, press

◄

or

►

to Format mode, press OK/ENTER button to enter.

Note: After using this function, all the information in the Micro SD card will be

deleted, please note it !

14

5.8 Connect to computer

Under main menu mode, press

◄

or

►

until USB MSDC, press OK/ENTER after

successfull connectting to computer, you can view and edit captured pictures.

15

Function : Film scanner/USB MSDC

Interface: USB 2.0

Image Sensor : 14.0 Mega pixels(4416*3312) 1/2.3” CMOS sensor

Display: Color 2.4" TFT LCD

Exposure Control : Automatic / Manual (-2.0 EV~ +2.0EV)

White Balance : Automatic

Resolution : 14.0 Mega pixels/ 22Mega pixels(interpolation)

Film type : 135 Film(36*24mm) / 126KPK Film(27*27mm)

110 Film(17*13mm)/Super8 Film(4.01*5.79mm)

Monochrome, Slide

Picture Eects : B&W,Slides,Negatives

File format : JPEG

TV-OUT type:

NTSC/PAL

Built-in memory : 128M

External memory card: SD card up to 32GB

Power Supply: DC 5V Adapter/ USB Port

Language: English, German, Spanish, Portuguese, Italian, Greek,

French, Dutch, Polish, Czech, Hungarian, Swedish,

Finnish, Danish and Norwegian.

Support system: Windows XP/vista/7; Mac10.7.2 or higher

Product Size: L91 x W104 x H105mm

Weight: 276g

MADE IN CHINA

6. Product Specication

16

7. Declaration

Please note products spec is subject to improvement .Any changes of

product will not make additional specify.

Please Note: We reserve the right to change the appearance of the product,

specifications, performance, parameters and design without prior notice.

The pictures of color box and manual are for reference only. Brochure

with pictures for reference,actual product and picture may be slightly

dierent,specic please in kind prevail!

8. Disposal

Dispose of packaging: For disposal, separate packaging

into dierent types. Cardboard and board must be disposed

of as paper and foil must be recycled.

Disposal of old devices: Applicable in the European Union

and other European countries with systems for the separate

collection of reusable materials. Do not dispose old devices

into the household waste! If the Rollei DF-S310SE is no

longer used, every consumer is legally obligated to dispose

them separately from the household waste, for example, at

a collection site of his community / city district. This ensures

that devices are properly recycled and negative effects

on the environment are avoided. Therefore electrical and

electronic equipment needs to be marked with the shown

symbol.

17

9. Conformity

The Manufacturer hereby declares that the CE marking was applied to the

Rollei DF-S310SE in accordance with the basic requirements and other

relevant provisions of the following CE Directives:

2011/65/EC RoHs Directive

2014/30/EU EMC Directive

2006/95/EEC LVD Directive

2009/125/EG EuP Directive

2002/96/EG WEEE Directive

The EC Declaration of Conformity can be requested from the address

specied on the Warranty card.

Page is loading ...

16

7. Declaration

Please note products spec is subject to improvement .Any changes of

product will not make additional specify.

Please Note: We reserve the right to change the appearance of the product,

specifications, performance, parameters and design without prior notice.

The pictures of color box and manual are for reference only. Brochure with

pictures for reference, actual product and picture may be slightly dierent,

specic please in kind prevail!

8. Disposal

Dispose of packaging: For disposal, separate packaging

into dierent types. Cardboard and board must be disposed

of as paper and foil must be recycled.

Disposal of old devices: Applicable in the European Union

and other European countries with systems for the separate

collection of reusable materials. Do not dispose old devices

into the household waste! If the Rollei DF-S310SE is no

longer used, every consumer is legally obligated to dispose

them separately from the household waste, for example, at

a collection site of his community / city district. This ensures

that devices are properly recycled and negative effects

on the environment are avoided. Therefore electrical and

electronic equipment needs to be marked with the shown

symbol.

17

9. Conformity

The Manufacturer hereby declares that the CE marking was applied to the

Rollei DF-S310SE in accordance with the basic requirements and other

relevant provisions of the following CE Directives:

2011/65/EC RoHs Directive

2014/30/EU EMC Directive

2006/95/EEC LVD Directive

2009/125/EG EuP Directive

2002/96/EG WEEE Directive

The EC Declaration of Conformity can be requested from the address

specied on the Warranty card.

Page is loading ...

Rollei DF-S310 SE Owner's manual

This manual is also suitable for

Rollei DF-S310 SE Owner's manual

in other languages

Related papers

Other documents