ZALMAN TM270VA LED User manual

Ver 1.1

Slim & Stylish Monitor Ever

WWW.ZALMAN.COM

User Manual

Model.: TM270VA LED

Page is loading ...

4

WWW.ZALMAN.COM

Cautions for Safety

Before using the product, please read the following cautions to properly use the product.

Cautions are divided into "Warning" and "Attention."

■ Please connect power plug to the grounded outlet.

■ Do not touch the power plug with a wet hand. It may cause electric shock.

■ Do not plug many electric appliances to a single outlet. It may cause re or trouble.

■ Use the adapter provided with the LED monitor only. Using other adapters may

cause re or trouble.

■ Do not use damaged power cord or plug. Do not use loose outlet.

It may cause electric shock or re.

■ When connecting power plug to the outlet, push the plug into the outlet to the end

so that the plug is rmly xed. Instable connection may cause re.

If you do not follow the instruction, serious injury or large accident

in the worst case may occur.

If you do not follow the instruction, light injury or product damage may occur.

Warning

Attention

1. Introduction

■ Acknowledgement

Thank you for purchasing the product.

ZALMAN LED monitor is a high-resolution monitor with various advantages

such a scomplete shutout of electromagnetic wave, reduction of power consumption,

and ecient use of space.

This manual is for correct use of the monitor. Please read the manual thoroughly to

make the best use of the excellent features of the product.

■ Package Contents

Check if the following items are included in the package and if any of the items are

missing, please contact your distributor.

Monitor, adapter, power cord, D-sub cable, DVI cable, audio cable, manual, HDMI cable

■ Monitor ■ Adaptor ■ Power Cord ■ D-SUB Cable ■ Audio Cable

■ User Manual

■ HDMI Cable

USER

MANUAL

5

WWW.ZALMAN.COM

If you do not follow the instruction, serious injury or large accident

in the worst case may occur.

If you do not follow the instruction, light injury or product damage may occur.

2. Monitor Installation

1. Connect Signal Cable

Connect the signal cable connector to D-Sub, HDMI port and fasten two bolts

rmly for grounding.

2. Connect Power Cable

Connect one end of the power cord to AC adapter and the other to the wall outlet or

multiple outlets. Then connect the DC cable of the AC adapter to the power

connector of the monitor.

3. Turn on the Monitor

Turn on the monitor and computer.

When you turn on the monitor, green or light green LED will be on. If LED is red or

ickering, check the connection of video signal cable. If LED is o, press the ' '

button gently.

4. Cautions in Installation

1. Install in the stable place.

2. Install where there is no moisture or dust.

3. Avoid the place exposed to direct sunlight or heating appliances.

4. Do not block the ventilation holes.

5. Avoid objects with strong magnetic forces.

3. Notice

■ This monitor complies with international VESA DPMS standard.

■ This monitor obtained the electromagnetic compatibility certicate for home use,

and therefore it can be used in all type of areas including the residential area.

■ Due to the characteristic of the LED panel, the brightness on the top and bottom

of the screen can be more or less dierent due to the dierence in the viewing angle.

■ Due to the characteristic of the LED panel, viewing the same image for a long time

can cause image retention which will disappear over time.

The optimum resolution is 1920 × 1080.

■ When you use this monitor for the rst time, if you are not satised with the screen,

you can change settings through the menu.

■ VESA hole is on the back of the monitor. (100 × 100mm)

■ Use the adapter provided with the monitor to supply power to the monitor.

Using other adapters can cause trouble and is not covered by the warranty for

free repair service.

■ This monitor can generate noise with few VGA card or at a specic frequency.

When the noise is generated, adjust manually.

6

WWW.ZALMAN.COM

4. Monitor Layout and Buttons

■ Front

■ Back

1. AUTO

(Automatic Screen Adjustment)

2. MENU (Menu, Select)

3. ◀ (Move Down or Left)

4. ▶ (Move Up or Right)

5. ' '

( Power ON or OFF)

1. DC IN: Power connector.

2. Earphone: Earphone cable connector.

3. AUDIO IN: Audio cable connector.

4. VGA: PC D-Sub cable connector.

5. HDMI: PC and HDMI cable connector

LED Status: Blue (Power is on / Red indicates power saving mode)

⑤ ④ ③ ② ①

7

WWW.ZALMAN.COM

5. LED Screen Setting Menu

■ Menu Loading

When you press the MENU button, the setting menu appears on the LED screen.

Using

◀

and

▶

buttons to congure the setting and press the MENU button again.

Brightness

Adjusts the brightness of the screen.

Contrast

Adjusts the contrast of the screen.

Gamma

Adjusts the gamma of the screen.

Horizontal Position / Vertical Position

Adjusts the horizontal/vertical positions

of the screen.

Frequency

Adjusts the frequency of the screen.

Phase

Adjusts the phase of the screen.

Sharpness

Adjusts the sharpness of the screen.

8

WWW.ZALMAN.COM

Preset (sRGB / 6500K / 9300K)

Adjusts the color temperature of the screen.

User Setting (Red / Green / Blue)

Allows the user to adjust the color of the

screen.

Language

Sets the language for the monitor and OSD.

OSD Horizontal Position

Adjusts the horizontal position of OSD.

OSD Vertical Position

Adjusts the vertical position of OSD.

OSD Time

Adjusts the display length of OSD.

Volume

Adjusts the volume of the speaker.

Mute

Turns the speaker on/o.

White Balance

Automatically adjusts the White Balance.

DCR ON/OFF

Turns on/o the dynamic contrast ratio

feature.

Maintain Aspect Ratio

Toggles between wide ratio

(16:9 or 16:10) and 4:3 ratio.

INPUT SELECT

Sets input signal to VGA(D-SUB) or HDMI.

I

nitialization

Resets all settings to the factory setting.

9

WWW.ZALMAN.COM

6. Monitor Specication

Model.

Screen Size

Optimum

Resolution

Pizel Pitch

Brightness

Contrast Ratio

DCR

Viewing Angle

Response Type

Display Colors

Input

Horizontal Sync

Vertical Sync

Built-in Speaker

Adapter

Specication

Dimensions

Certication

TM270VA LED

27"(68cm)

1920 x 1080

16 : 9 Wide

0.311 mm * 0.311 mm

300cd/m²

5,000 : 1

20,000,000 : 1

Horizontal 170˚

Vertical 160˚

G to G 2ms

16.7 M

D-Sub (15 Pin)

HDMI x 2

Audio

31.5~94 KHz

60 ~ 75 Hz

2W + 2W (8Ω)

12V / 4A

646 * 453 *170mm

CB, CE, KC, VCCI, GOST

10

WWW.ZALMAN.COM

7. Troubleshooting

[ ZALMAN LED MONITOR WARRANTY POLICY ]

■

The monitor does not show anything.

- Check if the power cord of the monitor is disconnected.

- Check if the ' ' of the monitor is o.

- Check if the power of the system is o.

- Check if the signal cable of the monitor is disconnected.

■

The screen is too dark.

- Go into OSD menu and adjust brightness and contrast.

■

The monitor is too hot.

- Give at least 5cm of room from other objects for ventilation.

■

The image is twisted or ickering.

- Check PC setting and select appropriate resolution to readjust the frequency.

■

There are spots of white and black.

- Use the monitor for about 20 minutes and clean the screen with the cloth for

cleaning glasses or very soft cloth using LED exclusive cleansing solution.

■

The color of the image is strange.

- Check if the signal cable is twisted or damaged.

ZALAMN LED Monitors are covered by

2 years limited warranty

as stated in the terms and

conditions herein.

* WARRANTY PERIOD

The warranty hereof shall mean a period of 2 years from the date of purchase.

* HOW TO GET SERVICE:

You may visit “Where to buy” section on ZALMAN website below to check who the local distributor

in your region area. (http://www.zalman.com/Company/Network/Network_eng.asp)

WARRANTY TERMS AND CONDITIONS ON ZALMAN LED MONITORS

1.ZALMAN guarantee that the monitor you have purchased is free from manufacturing defects in

materials and workmanship when dispatched from our warehouse. The receipt of purchase shall

be provided as proof of the date of purchase and the warranty period commences as of that date.

2.During the warranty period, ZALMAN LED monitors will be picked up, repaired and returned

by the ZALMAN authorized distributor(s)/reseller(s) or may be delivered and collected by the

customer.

3.Notwithstanding the foregoing, this warranty shall not be construed to come with international

warranty service. The warranty service only covers monitors which have been purchased in the

local country. Extra charges will apply if service or replacement is requested in a different country.

4.Proof of purchase will be required in the event of discrepancy with alternative record(s) of sale.

5.The warranty automatically becomes void if the product has been physically damaged or

rendered defective –

(a)as a result of an accident, misuse, re, lightning, malicious damage, water damage, abuse or

other circumstances beyond ZALMAN’s control;

11

WWW.ZALMAN.COM

(b) by the use of parts or peripherals not authorized by ZALMAN;

(c) as a result of normal wear and tear;

(d) by use in an improper operating environment;

(e) by modication of the monitor;

(f) by the serial number or product code sticker being removed or defected;

(g) as a result of servicing by anyone other than an ZALMAN authorized service centre or its

authorized service agent(s)

(h) as a result of the monitor not being operated in conformity with ZALMAN’s user manual.

6.The customer must ensure that the monitor is packed in appropriate packing for all handling.

Any damage due to improper packing will be chargeable to the customer.

7.The ZALMAN authorized distributor(s)/reseller(s) may charge the customer at current applicable

hourly rates if the technician determines that the problem is;

(a) user related;

(b) caused by changes made to the normal settings of the monitor;

(c) caused by the customer’s computer or electrical power supply;

(d) due to cause(s) that are not covered by this warranty.

8.The customer must ensure that they are available when the distributor(s)/reseller(s)’

representative arrives to pick up or deliver the monitor. Any additional visits made due to the

customer’s unavailability will be chargeable to the customer; or else the customer can choose to

deliver or fetch the monitor to (from) the distributor(s)/reseller(s) at their own cost.

9.Software-related faults resulting from incorrect software installation or usage or

software viruses or software-inherent bugs shall not be considered as product faults and may

incur a charge for rectication.

10.Defective pixel in LED panel monitors are not a warranty issue unless they are beyond the

criteria prescribed in panel manufactures’’ specication for pixel defects. Please refer to ZALMAN

LED Monitor Pixel Policy Below.

[ ZALMAN LED Monitor Defective Pixel Policy

]

The defective monitors will be replaced with new one or refurbished in accordance with a period of

usage and number of non-performing pixel of monitor.

– One to one exchange with new one:

- More than 1 bright non-performing pixels in A-ZONE and more than 3 bright non-performing

pixels in B-ZONE appearing in 30 days from end-user invoice purchase date

- More than 2 bright non-performing pixels in A-ZONE and more than 2 bright non-performing pixel

in B-ZONE appearing in 30 days from end-user invoice purchase date

-

More than 3 bright non-performing pixels in A-ZONE in 30 days from end-user invoice purchase date

-

More than 5 bright non-performing pixels in B-ZONE in 30 days from end-user invoice purchase date

– One to one exchange with the refurbished one:

- More than 1 bright non-performing pixels in A-ZONE and more than 3 bright non-performing

pixels in B-ZONE appearing after 30 days from end-user invoice purchase date

- More than 2 bright non-performing pixels in A-ZONE and more than 2 bright non-performing

pixels in B-ZONE appearing after 30 days from end-user invoice purchase date

- More than 3 bright non-performing pixels in A-ZONE after 30 days from end-user invoice

purchase date

- More than 5 bright non-performing pixels in B-ZONE after 30 days from end-user invoice

purchase date

※

Except dark non-performing pixels

B-ZONE B-ZONE B-ZONE

B-ZONE A-ZONE B-ZONE

B-ZONE B-ZONE B-ZONE

Page is loading ...

28

WWW.ZALMAN.COM

6. Monitor Produktnorm

Model.

Bildschirmgröße

Optimale

Auösung

Rapport d’écran

Pixelabstand

Helligkeit

Kontrast

Dynamischer

Kontrast

Blickwinkel

Ansprechzeit

Farbdisplaz

Eingabe

Horizontale

Frequenz

Vertikale

Frequenz

Interner

Lautsprecher

Adapterfeature

Produktgröße

Produktzertikat

TM270VA LED

27"(68cm)

1920 x 1080

16 : 9 Wide

0.311 mm * 0.311 mm

300cd/m²

5,000 : 1

20,000,000 : 1

Horizontal 170˚

Vertical 160˚

G to G 2ms

16.7 M

D-Sub (15 Pin)

HDMI x 2

Audio

31.5~94 KHz

60 ~ 75 Hz

2W + 2W (8Ω)

12V / 4A

646 * 453 *170mm

CB, CE, KC, VCCI, GOST

Page is loading ...

58

WWW.ZALMAN.COM

6. 显示器的产品规格

Model.

画面大小

最佳分辨率

画面比率

像素间距

亮度

明暗比率

动态明暗比率

视场角

反应速度

标色

输入

水平频率

垂直频率

内置喇叭

适配器配置

产品大小

产品认证

TM270VA LED

27"(68cm)

1920 x 1080

16 : 9 Wide

0.311 mm * 0.311 mm

300cd/m²

5,000 : 1

20,000,000 : 1

Horizontal 170˚

Vertical 160˚

G to G 2ms

16.7 M

D-Sub (15 Pin)

HDMI x 2

Audio

31.5~94 KHz

60 ~ 75 Hz

2W + 2W (8Ω)

12V / 4A

646 * 453 *170mm

CB, CE, KC, VCCI, GOST

Page is loading ...

ZALMAN TM270VA LED User manual

ZALMAN TM270VA LED User manual

in other languages

Related papers

Other documents