Bellfires Wi-fi box User manual

Manual for the Bell• res Wi-Fi box

in combination with the Bell• res Gas app

3

English

Instructions for use

CONTENTS

Page

1 Introduction ....................................................

.....................

..........

....

...

.. 5

2 Installation of the Wi-Fi box .....................................................

................

. 5

2.1 Components ....................................................................

.......

......

....

. 6

2.2 Connections receiver

....................................................

........

...

....

.....

8

2.3 Connections Bellﬁ res Wi-Fi box .

.......................

.........................

.....

.. 9

2.3 Installation Bellﬁ res Wi-Fi box ..........................................

....

.....

..

10

3 Setting the Bellﬁ res Gas app .............................................

.........

....

.

........ 13

3.1 Installation ...........................................................................

....

......

..

. 13

3.2 Registration .............................................................

...........

.....

...

......

.

14

3.3 Connect the tablet or smartphone of the Bellﬁ res Wi-Fi box ............ 16

3.4 Fire settings ......

.............

............................................

......

............

.....

. 19

3.5 Connecting extra mobile devices ..................................................... 20

4 Operating the ﬁ re of the Bellﬁ res Gas app

..

..........................

............

..

...

.

. 21

4.1 Start screen ..............................

.........

...

.....

....

......................

....

.........

. 21

4.2 Explanation of the symbols ................

............................

.......

....

...

....

..

22

4.3 Menu functions .........................................

...........................

.

............

24

5 Troubleshooting ........................................................................................ 40

4

English

Instructions for use

5

English

Instructions for use

1 INTRODUCTION

These instructions describe the installation of the Bellﬁ res Wi-Fi box and the use of the

accompanying Bellﬁ res Gas app for the Bellﬁ res appliances.

The Bellﬁ res Gas app is suitable for use on a smartphone or tablet and can be

downloaded free via the Play Store (Android) or App Store (Apple).

The Bellﬁ res Gas app extends the ﬁ re’s possibilities. It is possible to set personal

preferences per user. It is also possible to carry out fault diagnostics remotely.

Once the Bellﬁ res Wi-Fi box has been installed, it is still possible to operate the ﬁ re

using the remote control supplied. For remote control operation, consult the manual

‘Instructions for use & Daily Maintenance’.

2 INSTALLATION OF THE BELLFIRES WI-FI BOX

The installation must only be carried out by a

“Gas Safe Register” registered installation engineer.

IMPORTANT

6

English

Instructions for use

• Bellﬁ res Wi-Fi box • Receiver (can be recognised by the

Article number: 341645 blue sticker). The receiver with Wi-Fi

functionality can be recognised by the

blue sticker.

Article number: 341644

• Connecting cable between the • 230VAC / 6VDC adapter

Bellﬁ res Wi-Fi box and the receiver Article number: 302092

Article number: 341647

2.1 COMPONENTS

The operating components comprise the following parts.

7

English

Instructions for use

• Hand-held transmitter

Article number: 341643

This must be provided with a blue sticker. If the remote control is provided with a green

or silver-coloured sticker, it is not suitable for use in combination with the Bellﬁ res Wi-Fi

box. In that case, contact your dealer.

8

English

Instructions for use

2.2 CONNECTIONS RECEIVER

Thermocouple

voltage / current

OUT - connection (yellow)

AUX:

Electrical

connection

for gas valve

“rear burner”

Thermocouple

voltage / current

IN - connection (red)

Connection

8 wire cable gas

regulator block

Connection

for external

operating

(option)

Piezo cable

connection

RESET button

SI: Serial Interface

Bellﬁ res Wi-Fi box

connection

SW TC

SI: Serial Interface

Bellﬁ res Wi-Fi box

connection

Sticker Blue

RESET button

AUX:

Electrical

connection

for gas valve

“rear burner”

9

English

Instructions for use

2.3 CONNECTIONS BELLFIRES WIFI BOX

RESET options on the Bellﬁ res Wi-Fi box

Pressing time

RESET button LED Function

1 second Blue Power LED Activates “Acces Point” mode

ﬂ ashes every for 10 minutes. During this time a

½ sec. connection can be made with the

home network.

5 seconds Blue Power LED Reset system.

ﬂ ashes 2 times a

second.

10 seconds Blue Power LED

Reset to factory settings,

ﬂ ashes 10 times this takes about 2 minutes.

a second. (During this time the Bellﬁ res

Wi-Fi box will be displayed

als “xpicowiﬁ _xxxx”)

20 seconds Blue Power LED Reset to factory settings, and all

ﬂ ashes 20 times

user data, this takes about

a second. 2 minutes. (During this time

the Bellﬁ res Wi-Fi box will be

displayed as ‘xpicowiﬁ _xxxx’)

ºC / ºF:

Connection for

temperature sensor

(option)

Reset button Not in use

10

English

Instructions for use

2.4 INSTALLATION BELLFIRES WI-FI BOX

If the ﬁ re is not ﬁ tted with Wi-Fi control, then the existing receiver can be replaced by a

receiver with Wi-Fi functionality using the instructions below.

The installation of the Wi-Fi box is also described.

In this case the hand transmitter must also be exchanged for a model that is suitable for

communication with the new receiver.

• Disconnect the connected receiver (which can be recognised by the green sticker,

receivers before October 2015 are provided with a silver sticker) and connect the

disconnected cables to the new receiver (with blue sticker).

• Connect the receiver with the Bellﬁ res Wi-Fi box using the cable supplied. Connect

this cable to the input “SI” on the receiver and the input “Receiver” on the Bellﬁ res

Wi-Fi box.

• Connect the 6 VDC mains adapter to the receiver.

• As soon as the Bellﬁ res Wi-Fi box is connected, the LED lights will light up.

USB:

Not in use

Receiver:

Receiver

connection

11

English

Instructions for use

LED Status

Power Blue On: mains supply OK

Off: no mains supply

WLAN Green On: connected with the home network

Flashing: “Access point” mode. A connection

can be made to a home network.

See Chapter 3

Off: No network found

Receiver Blue On: Bellﬁ res Wi-Fi box is connected with the receiver

Off: no connection with receiver

All LEDs Flashing: Bellﬁ res Wi-Fi box is being internally

conﬁ gured

• Optionally, an external temperature sensor can be connected to the Bellﬁ res Wi-Fi

box (˚C/˚F) to measure the room temperature. The end of the sensor must be placed

outside the immediate radiation area of the ﬁ re.

Note: If the external temperature sensor is not connected, then the room temperature

will be read by the hand transmitter.

• The Bellﬁ res Wi-Fi box can now be set using the Bellﬁ res Gas app. The ﬁ re can then

be operated using the Bellﬁ res Gas app.

• The ﬁ re can also be operated with the hand transmitter supplied with the Bellﬁ res

Wi-Fi box (can be recognised by the blue sticker). Once the Wi-Fi box is installed, it

is no longer possible to operate the ﬁ re using the old hand transmitter.

12

English

Instructions for use

Gas

supply

connection

Thermocouple

Ignition(piezo)cable

2 Wire cable

Motor-

knob

Gas pipe “Rear burner”

“red”

“black”

AUX

“red”

“yellow”

Pilot light

Pilot light gas pipe

Thermocouple

interruptor

8 Wire

cable

Gas pipe “Front burner”

Gas valve

“Rear burner”

AC power

adapter

230 VAC -

6 VDC

Button

“RESET”

Receiver

(with battery

compartment for

4 AA-batteries)

Connection cable

(option) for

external operating

(i.a. Domotica

systems)

Thermo-

electrical

cable TC

Thermo-electrical

cable

SW

Module

Ambient

lighting

(option)

Connecting cable 230 VAC

Plug with Earth connection

Module (option)

5 Wire

cable

Convection

fan

(option)

Burner

SI

Home Network

Bellﬁ res Gas app for Android/iOS

Temperature

Sensor

(optional)

5 Wire cable

Bellﬁ res

Wi-Fi

box

Hand-held

transmitter

GAS

REGULATOR

BLOCK

13

English

Instructions for use

3 SETTING UP THE BELLFIRES GAS APP

The Bellﬁ res Gas app is available for Apple and Android tablets and smartphones.

Minimum requirements for tablet/smartphone - iOS 8.0 or Android 4.4

Search in the Google Play Store or in the Apple App Store on “Bellﬁ res gas”.

The Bellﬁ res Gas app can be downloaded for free.

Once the Bellﬁ res Gas app has been downloaded, it can be installed straight away.

To set your Bellﬁ res Gas app, you need the name (SSID) and password of your Wi-Fi

router.

System requirements for Wi-Fi router:

• Compatible with IEEE 802.11n/g/b

• WPA2 encryption

• Radio frequency: 2,4 GHz band

• Wireless auto channel; automatic search for Wi-Fi radio channel, free of interference

• Supports User Datagram Protocol (UDP)

Attention: If the Wi-Fi router is part of a corporate network, or if the router is suitable

to be included in a corporate network, the User Datagram Protocol (UDP)

and/or broadcasting needs to be enabled in the router settings.

If the UDP protocol and/or broadcasting are not enabled, the router is not visible to the

Wi-Fi box and they cannot be linked together.

To change the router settings, refer to the corresponding manual or contact the manu-

facturer of the router.

After connecting the Wi-Fi box to the home network, the initial router settings can be

restored, if desired. The connection between the Wi-Fi box and the home network will

remain.

NB: In routers for home use, the UDP protocol is generally always enabled.

3.1 INSTALLATION

The shown screenshots are from an Apple iPad. The screen visual on a smartphone or

Android tablet may differ from these shown screenshots.

14

English

Instructions for use

3.2 REGISTRATION

Before using the Bellﬁ res Gas app, you need to register.

Several people may be registered.

Registration makes it possible to create a user account, with your personal settings.

• If you do not have an

an account yet, you

must register ﬁ rst.

E-mail:

Password:

REGISTRATION

You must register before logging in.

If you have already registered go directly to login.

Registration is one time only.

Back LoginForgot password

Register

LOGIN

To log in you must accept the Terms and Conditions

Start the Bellﬁ res Gas app on your smartphone or tablet

• Select the required language

• Select the required

temperature scale

(˚C or ˚F)

• Select 12-hour or 24-hour

clock

• Select “Next”

Temperature scale

12/24 Hour 12

24

ºF ºC

LANGUAGE

English Deutsch Francais Nederlands Espanol

15

English

Instructions for use

• Complete the requested

details

REGISTRATION

First name:

Last name:

Address:

Zip Code:

City:

Country:

Phone:

• The email address is the

user name for your account

• The password must have

at least 8 characters

• Agree with the “Privacy

Policy”

• Select “Register”

Go to your email in box and click on the link to conﬁ rm. Once the registration is succes-

sfully completed, you will receive an email to conﬁ rm your account details.

As soon as you receive the conﬁ rmation, you can log in on the Bellﬁ res Gas app.

Back

Register

Phone:

Dealer:

E-mail:

Password:

Conﬁ rm Password:

To log in you must accept the Privacy Policy

16

English

Instructions for use

• Return to the Bellﬁ res Gas

app

• Fill in the login details and

agree with the conditions

• Then press “Login”

E-mail:

Password:

REGISTRATION

You must register before logging in.

If you have already registered go directly to login.

Registration is one time only.

Back LoginForgot password

Register

LOGIN

To log in you must accept the Terms and Conditions

• Select “add Wi-Fi box”;

to do this press the

sign

Connect new WiFi-Box

Start APP

Current Wi-Fi Boxes connected:

3.3 CONNECT THE TABLET OR SMARTPHONE TO THE BELLFIRES WI-FI BOX

The Bellﬁ res Wi-Fi box which is installed in the ﬁ re (see chapter 2) creates its own

network.

To operate the ﬁ re using the Bellﬁ res Gas app, the Bellﬁ res Wi-Fi box’s network must

connect to your own home network (wiﬁ router).

Before starting the connection procedure, check:

• The home network availability

• The home network name and password

• That the SSID of the router is not hidden from the Wi-Fi box

• That the home network signal is within range of the Wi-Fi box

• That the Wi-Fi router supports User Datagram Protocol (UDP)

A total of 8 ﬁ res can be linked.

Log into the Bellﬁ res Gas app

17

English

Instructions for use

• Select OK

• Go to the Wi-Fi settings on

your smartphone or tablet

and connect to the Wi-Fi

network

“myﬁ re_WiFi-box_<number>”

Go to Wi-Fi Settings.

Connect Smart Device to Wi-Fi-Box. Password:

‘MYFIREPLACE’

OK

Back

• Select the network

“myﬁ re_WiFi-box_<number>”

•

It may take a few minutes

before the Bellﬁ res Wi-Fi

box is displayed.

• The password for the

Bellﬁ res Wi-Fi network is:

MYFIREPLACE

Settings

Wi-Fi

“myﬁ re_WiFi-Box_<EE9F>”

Wi-Fi “myﬁ re_WiFi-Box_<EE9F>”

Airplane Mode

Bluetooth

On

Notiﬁ cations

Control Centre

Do Not Disturb

General

Display & Brightness

Wi-Fi

Wallpaper

Sounds

Passcode

Battery

Privacy

Other...

Ask to Join Networks

CHOOSE A NETWORK ...

Known networks will be joined automatically. If no known networks are available, you will have

to manually select a network.

Important: If the Bellﬁ res Wi-Fi box is still not displayed after a few minutes, the

Wi-Fi box must be reset by pressing the reset button for 20 seconds (see

page 9). The Bellﬁ res Wi-Fi box will automatically restart after this. As

soon as it is displayed on the screen, the installation can be continued.

Users of IPhone or IPad with iOS 10.0 or higher:

After selection of the network “myﬁ re_WiFi-box” a message appears “No internet

connection”. This message can be ignored. Continue with the instructions below after

selection of the network “myﬁ re_WiFi-box”.

18

English

Instructions for use

• Return to the Bellﬁ res Gas

app and connect the Bellﬁ res

Wi-Fi box to your own

network.

• To do this, complete the

following details

º

Name of the ﬁ re (free to

choose)

º

Name of the home

network (SSID)

º

Home network’s password

º

Select “Connect”

Back

Connect

Name Your Fire:

House Wi-Fi Name (SSID):

House Wi-Fi Password:

Connect Wi-Fi Box To Your Wi-Fi Router

• It may take a few minutes

before the connection has

been established with your

smartphone or tablet.

Connecting

• Select OK

• Go to the Wi-Fi settings on

your smartphone or tablet

and connect to your home

network.

• Then return to the Bellﬁ res

Gas app

Connect your Smart Device to

your Wi-Fi Router

OK

Back

Attention: Connection is only possible if the so-called UDP protocol of the Wi-Fi

router is enabled. Where applicable, please check with the provider of

the Wi-Fi router. (see also section 3 of these instructions)

19

English

Instructions for use

3.4 FIREPLACE SETTINGS

Once the Bellﬁ res Wi-Fi box of the appliance has been connected to your home net-

work, the ﬁ re’s speciﬁ cations can be entered into the Bellﬁ res Gas app.

• Please select options your

ﬁ re is equipped with.

NOTE: The double burner

is described as AUX

Note: If the ﬁ re is not provided

with the optional fan system

and/or lighting, then the app will

not display these options.

• Select complete as soon

as the details have been

entered. (scroll down to

do this)

Signal strenght

Wi-Fi-Box 1.3 / 20

Receiver b8.10 / 40.2b

Handset B6R-H8TV21P - N/A

Back

Finish

Time settings: Current: 01-03-00 19:11:50

Firename

CONFIRM FIREPLACE SETTINGS

Fireplace name:

Icon

Fan

Light

20

English

Instructions for use

The Bellﬁ res Gas app is ready for use.

Set-up successful

Update available

Set-up failed

Not compatible

• Explanation of the symbols:

If is shown on the screen, it

is recommended to ﬁ rst

download and install the update

before continuing with the

installation.

Current Wi-Fi Boxes connected:

My ﬁ replace

Connect new Wi-Fi Box

Start APP

3.5 CONNECTING EXTRA MOBILE DEVICES

Once you have connected a mobile device to the Bellﬁ res Wi-Fi box for the ﬁ rst time,

you can connect other mobile devices.

• Download the Bellﬁ res Gas app from the App Store or Google Play on the mobile

device that you want to connect

• Start the Bellﬁ res Gas app

• Log in to the Bellﬁ res Gas app (see page 15).

• The Bellﬁ res Gas app will display the connected Wi-Fi boxes.

Then, click on ‘Start app’.

Now you can operate the ﬁ re from the mobile device.

Note: Make sure that the mobile device is connected to the same Wi-Fi network as the

Bellﬁ res Wi-Fi box during the initial installation procedure.

Page is loading ...

Bellfires Wi-fi box User manual

Bellfires Wi-fi box User manual

Related papers

Other documents