2
2
AirSenz Digital Instructions:
Open the front cover and you will see 7 pink buttons: (From left to right)
RESET, SPRAY, MODE, WEEK, HOUR,MIN,ON/OFF
1. Set Start And Stop Time Of Spray
This dispenser can set start and stop
time of spray from 00:00 to 24:00.
Push the MODE button for 2 seconds
(”START” appears on the LCD), then
push the HOUR and MIN buttons to
set start time (for example, start from
09.00 and stop 18.00).
Push Mode button again (”STOP”
appears), push the HOUR and MIN
buttons to set the stop time.
2. Set Spray Time Interval
Push the MODE button. When
“INTERVAL” appears push the MIN
button to set the interval time
between 1-60 minutes
3. Check The Number Of Times Of Spray
Push the MODE button. When “COUNT”
appears on the LCD screen, the total
spray times will also appear (on average a
rell can can spray 3000 times in total).
If you want to clear the spray times away,
press the RESET button.
4. Set Weekend Working
Push the Mode button. When “WEEK”
appears on the LCD, push the WEEK
button to set the weekend operation
times. There are 3 working cycles to
choose from:
1.2.3.4.5 (work from Mon to Fri)
1.2.3.4.5.6 (work from Mon to Sat)
1.2.3.4.5.6.7 (work from Mon to Sun)