Abit GC-02 User manual

Abit
Brand
Abit
Model
GC-02
Type
User manual
4200-0417-02 Rev. 1.01 ABIT Computer Corporation Guru Clock
Easy Installation
PC Power On/Off
H/W Monitor & Warning
Prompt OverClocking
Current Time Indicating
Room Temperature Indicating (10°C~50°C)
MSN Checking
E-Mail Checking
Large LCD Screen (4x7cm)
Guru Linking Cable (1.8m)
PC Connection:
The Guru Clock is a hot-swappable device, no needs to power-off your computer to do the connection. All you
have to do is to install the ABIT uGuru Utility first (bundled in the driver-CD) and restart the system before
connecting Guru Clock to your computer. A µGuru icon appears at the lower right of the status bar represents
your system is ready to connect Guru Clock.
This device only works together with top-of-the-rank of ABIT’s motherboards equipped with uGuru technology.
DO NOT connect this device with regular USB cable or on any other motherboards.
Attach the end of the linking cable’s 5-pin-plug to the
GURU1 header on your ABIT motherboard.
Screw the I/O shield with the linking cable passing
through into any position with empty PCI slot at the
computer’s back panel.
Attach the other end of the linking cable to the linking
connector at the back of the Guru Clock, no matter
when the system is on or off.
The Guru Clock is now ready to serve at your fingertips.
G
G
G
u
u
u
r
r
r
u
u
u
C
C
C
l
l
l
o
o
o
c
c
c
k
k
k
T
T
T
h
h
h
e
e
e
3
3
3
r
r
r
d
d
d
E
E
E
y
y
y
e
e
e
O
O
O
n
n
n
Y
Y
Y
o
o
o
u
u
u
r
r
r
P
P
P
C
C
C
LCD Screen:
• [CPU Speed]: This section displays the reading
of CPU speed.
• [OC Level]: This section displays the level you
choose in the OC Guru Setting.
• [AutoDrive]: This section lights up when
running AutoDrive OC Guru Setting.
•
[FAN Speed]: This section displays the reading
of fan speed detected at the fan connectors for
CPU, SYS, NB, VGA AUX1, or AUX2.
• [Current Time]: This section displays your local
time, available in 12 or 24-hour format.
• [MSN Information]: This icon blinks when the
computer is having MSN message.
• [H/W Warning]: This icon blinks when an
abnormal temperature reading has been
detected.
• [H/W Temperature]: This section displays the
reading of temperature detected at the area near
CPU, SYS, PWM, or VGA.
• [H/W Frequency/Voltage]: This section displays the
reading of frequency or voltage detected at CPU,
SYS, PWM, or VGA.
• [Room Temperature]: This section displays your
room temperature detected by the thermal sensor
mounted at the back of the Guru Clock.
• [E-mail Information]: This icon blinks when the
computer is having E-mail message.
Note: (1) Except the E-mail and MSN information icon,
all the icons on the screen will still displaying your
hardware readings even after system power-off as long
as the system power supply is connected with AC
power source. (2) The VGA icon appears only when
applying ABIT’s VGA card to ABIT’s motherboard
equipped with uGuru technology.
Button Operation:
There are three buttons to control the options to be
monitored on the Guru Clock.
• [Power On/Off]: Press this button to power-on your
computer, press and hold this button for more than
4 seconds to power-off your computer.
• [Menu]: Press the button to select the menu from
the options of [OC Mode], [Temperature], [Fan],
[Voltage], and [Frequency].
• [Select]: Press button to select the options in this
menu.
After selected the categories you want to monitor,
press [Menu] button again to confirm your selection.
Setting Menu:
After completed the installation of ABIT uGuru Utility
(bundled in the driver-CD) and restart the system, a µGuru
icon appears at the lower right of the status bar.
To enter the Guru Clock setting menu, power on the
system, move your mouse pointer to this µGuru icon, right
click your mouse button. The µGuru menu spreads up.
Move your mouse pointer to the Guru Clock icon, left click
your mouse button once again.
ABIT-EQ:
• [Temperature], [Fan], [Voltage], [Frequency]: Select
the options you want Guru Clock to monitor from these
main categories.
• [Temperature Format]: Select the temperature format
from Celsius or Fahrenheit.
• [Time Format]: Select the 12 or 24-hour time format.
• [Run at system start up]: Check this box to enable the
system to run the Guru Clock setting menu.
• [OK]: Confirm and exit this menu.
• [Apply]: Confirm and save the new settings modified in
the menu of ABIT-EQ to Guru Clock.
• [Refresh]: Confirm and save the new settings modified
in the menu of Guru Clock to ABIT-EQ.
Email / IM:
• [Connect To MSN Messenger]: Enable/Disable
connection to MSN Messenger.
• [Check Email]: Enable/Disable Email checking function.
• [Check every minutes]: Type in the time interval
you want to check Email.
• [Add]: Add in another new POP3 address setting. The
[POP3 Setting] screen pops up.
• [Remove]: Remove the POP3 address selected in the
POP3 address column.
• [Modify]: Modify the POP3 address selected in the
POP3 address column.
POP3 Setting:
Here in this menu you can key in your user name,
password, and POP3 server information for adding another
new E-mail account. Click [OK] to confirm and exit this
menu. Click [Cancel] to exit this menu without saving any
information.
  • Page 1 1
  • Page 2 2

Abit GC-02 User manual

Abit
Brand
Abit
Model
GC-02
Type
User manual
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents