2. Whirlpool
  3. WM1450 W
WM1450 W

Whirlpool WM1450 W, KRVA 3801, PRC 281W A+, PRC 330W A+, PRC 380W A+, WM1600 A++W, WM1602 A+W, WM1630 A++W, WM1830 A++W Program Chart

  • Hello! I am an AI chatbot trained to assist you with the Whirlpool WM1450 W Program Chart. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
PRODUCT SHEET
GB
GB
I
D F NL E P GR
DK
S N FIN
Refrigerator Compartment
1.
Crisper drawer
2.
Shelves / Shelf area
3.
Control panel
4.
Upper door tray
5.
Door trays
6.
Bottle rack
7.
Removable bottle restrainer (if present)
8.
Rating plate (at the side of crisper drawer)
9.
Light, positioned either below the control
panel or inside the appliance (depending on
model)
10.
Divider between Refrigerator
compartment and Cool Compartment, in
fixed position (if provided)
11.
Fan with filter (if provided), see relevant
instructions for filter
A
. Refrigerator Zone
B
. Compartment for storage of matured
cheese and cold cuts (if provided)
Notes
: The number of shelves and type of accessories may vary, depending on the model.
All shelves, door trays and racks are removable.
Important: Refrigerator accessories must not be washed in a dishwasher.
4
5
7
6
11
2
10
3
8
1
9
A
B
A
5019 635 01015
GB
I
D F NL E P GR
DK
S N FIN
Refrigerator compartment controls
(depending on the model)
1.
Thermostat knob
2.
Green indicator (operation of appliance)
Thermostat on
z
/Off
: no refrigeration, no light
Thermostat on
1-min
:
minimum
refrigeration.
Thermostat on
7-max
:
maximum
refrigeration.
Recommended thermostat setting: 3-4/med position.
The refrigerator can operate at ambient temperatures between +10°C and +38°C. Optimal performance is obtained
at temperatures between +16°C and +38°C.
Note
: The ambient air temperature, the frequency of door opening and the position of the appliance can affect the
internal temperatures of the refrigerator. These factors must be taken into account when setting the thermostat.
Removing the light bulb Replacing the bulb
1.
Unscrew the light bulb as shown in the figure.
1.
Loosen the screw and remove the lamp cover.
2.
When replacing the bulb, bear in mind that this
appliance is fitted with a special bulb (15W with
bayonet fitting); to replace do not unscrew, but pull
towards the inside of the appliance (as indicated by
the arrow).
3.
Refit the lamp cover and secure it with the screw.
P
rin
te
d
in
Ita
ly
02/10
5019 635 01015
(if included)
/