Impact SLS-AC Serise Air Cushioned Link Stand Operating instructions

Brand: Impact

Model: SLS-AC Serise Air Cushioned Link Stand

Type: Operating instructions

SLS-AC-7

SLS-AC-79

SLS-AC-9

SLS-AC-12

Air Cushioned

Link Stand

INSTRUCTIONS

Introduction

Thank you for choosing Impact.

The air-cushioned link stands are industry-standard general-purpose light

stands that interlock, which makes them perfect for storage and travel because

they take up minimal space. When the stands are stacked together, you can

easily carry several of them with one hand. These stands feature beefy locks

with T-handles for exceptional torque, so even at maximum height, they provide

a secure mount for your lights.

Each stand features a corrosion-resistant brass baby pin that’s compatible with

most studio lights and ash heads. And for extra functionality, the baby pin has

a 3/8-inch male thread to add a ball head has a 3/8-inch male thread to add an

accessory such as a ball head. A 3/8-16 to 1/4-20 adapter is included to mount an

accessory like a ring light or microphone. Air cushioning ensures protection for

your mounted equipment and ngers when the locks are loosened. The sections

will slowly ease down without slamming.

Precautions

• Please read and follow these

instructions, and keep this manual in a

safe place.

• Handle the unit with care.

• Clean the unit with a soft, dry cloth.

• Make sure everything is secure

before proceeding.

• Make sure the item is intact and

there are no missing parts.

• Do not exceed the maximum load

capacity.

• Use caution when mounting a

product at the maximum load

capacity.

• All images are for illustrative

purposes only.

Setting Up the Stand

1. If the stands are interlocked,

separate them by pressing the

release button and removing

the stand in the direction

indicated by the recessed

arrow.

2. Loosen the center lock, and

spread the tripod legs.

For the widest footprint and

maximum stability, make sure the

spreader is parallel to the oor.

Interlocking the Stands

1. Close the stands so the legs

fold at, and tighten the

center lock.

2. Make sure the release button

arrows are all pointing in the

same direction, and place the

bottom tab into the triangular

notch.

3. Press the tops of the stands

together. Insert the triangular

tab into the slot so they click

and lock together.

Specications

Model SLS-AC-7 SLS-AC-79 SLS-AC-9 SLS-AC-12

Number of Sections 4 3 3 4

Maximum Working Height 83.9 in.

(2.13 m)

94.9 in.

(2.41 m)

108.1 in.

(2.75 m)

144 in.

(3.66 m)

Minimum Working Height 29.9 in. (76

cm)

40.6 in.

(103 cm)

47.5 in.

(120.5 cm)

49.3 in.

(125 cm)

Load Capacity 8.8 lb.

(4 kg)

8.8 lb.

(4 kg

22 lb.

(10 kg)

22 lb.

(10 kg)

Closed Length 27.4 in.

(69.5 cm)

34.9 in.

(88.5 cm)

40.6 in.

(103 cm)

42 in.

(106.5 cm)

Footprint Diameter 27.6 in. (70

cm)

44.5 in.

(113 cm)

43.3 in.

(110 cm)

43.3 in.

(110 cm)

Material Aluminum,

Polymer,

Brass

Aluminum,

Polymer,

Brass

Aluminum,

Brass

Aluminum,

Brass

Weight 2.68 lb.

(1.22 kg)

3 lb.

(1.35 kg)

4.9 lb.

(2.2 kg)

5.6 lb.

(2.55 kg)

Mounting

Stand/Column Top Mount 5/8 in. receiver with 3/8-16 male thread

Included Adapter 3/8-16 female to 1/4-20 male

One-Year Limited Warranty

This Impact product is warranted to the original purchaser to be free from defects

in materials and workmanship under normal consumer use for a period of one

(1) year from the original purchase date or thirty (30) days after replacement,

whichever occurs later. The warranty provider’s responsibility with respect

to this limited warranty shall be limited solely to repair or replacement, at the

provider’s discretion, of any product that fails during normal use of this product in

its intended manner and in its intended environment. Inoperability of the product

or part(s) shall be determined by the warranty provider. If the product has been

discontinued, the warranty provider reserves the right to replace it with a model

of equivalent quality and function.

This warranty does not cover damage or defect caused by misuse, neglect,

accident, alteration, abuse, improper installation or maintenance. EXCEPT AS

PROVIDED HEREIN, THE WARRANTY PROVIDER MAKES NEITHER ANY EXPRESS

WARRANTIES NOR ANY IMPLIED WARRANTIES, INCLUDING BUT NOT LIMITED

TO ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A

PARTICULAR PURPOSE. This warranty provides you with specic legal rights, and

you may also have additional rights that vary from state to state.

To obtain warranty coverage, contact the Impact Customer Service Department

to obtain a return merchandise authorization (“RMA”) number, and return the

defective product to Impact along with the RMA number and proof of purchase.

Shipment of the defective product is at the purchaser’s own risk and expense.

For more information or to arrange service, visit www.impactstudiolighting.com

or call Customer Service at 212-594-2353.

Product warranty provided by the Gradus Group.

www.gradusgroup.com

Impact is a registered trademark of the Gradus Group.

GG1

Impact SLS-AC Serise Air Cushioned Link Stand Operating instructions

Impact SLS-AC Serise Air Cushioned Link Stand Operating instructions

Impact SLS-AC Serise Air Cushioned Link Stand Operating instructions

Related papers

Other documents