OTC 3829 Reference guide

  • Hello! I have analyzed the SPX-VCI user guide and I am ready to assist you with any questions you may have about the installation procedure. This document covers the steps needed to install the VCI software, from language selection to finalizing the installation on your PC, including both 32-bit and 64-bit systems.
  • What should I do if the install doesn't initiate automatically?
    What do I need to do if Microsoft Visual C++ 2005 Redistributable package has not been installed previously?
    What should I do when prompted that the installation was successfully completed?
SPX-VCI Quick Start Guide
Installation
Turn PC on and allow Windows1. ® to boot up.
Insert the SPX-VCI CD into the CD reader. If the 2.
install does not automatically initiate, open the Run
utility from the start menu and enter:
(your CD drive):\setup.exe
Example: D:\setup.exe
Select a language from the list of choices offered in 3.
the drop down menu. Click OK.
If Microsoft Visual C++ 2005 Redistributable 4.
package has not been installed on the PC
previously a prompt to install it now opens. Click
Install.
A prompt to ensure that VCI applications are not 5.
running and the VCI is not connected to a PC is
shown. When conrmed, click OK.
Read the Software Product License Agreement 6.
that appears. Select the “I accept the terms in the
license agreement” choice and click Next.
At the Welcome screen, click 7. Next.
1
2
Choose where the les should install to. Click 8. Next
if the location shown is correct; click Change if the
location needs to change.
32-bit PCs
64-bit PCs
Click9. Install to begin the installation.
A warning appears, however, certication of 10.
this software is in process and it is safe to click
Continue Anyway.
When prompted the installation was successfully 11.
completed, click Finish to exit
August 30, 2011
©2011 SPX. All rights reserved.
/