Symmons SRT-4572-STN Installation guide

Category
Faucets
Type
Installation guide

This manual is also suitable for

Symmons SRT-4572-STN is a Roman tub faucet with a satin nickel finish. It is designed for durability and ease of use, with a variety of features that make it a great choice for any bathroom.

The faucet has a two-handle design, with hot and cold indicators on the handles. The handles are easy to grip and turn, even with wet hands. The faucet also has a high-arc spout that provides plenty of clearance for filling the tub or washing your hair.

The SRT-4572-STN is made from solid brass and is covered by a limited lifetime warranty. It is also WaterSense certified, meaning that it meets the EPA's standards for water efficiency.

Symmons SRT-4572-STN is a Roman tub faucet with a satin nickel finish. It is designed for durability and ease of use, with a variety of features that make it a great choice for any bathroom.

The faucet has a two-handle design, with hot and cold indicators on the handles. The handles are easy to grip and turn, even with wet hands. The faucet also has a high-arc spout that provides plenty of clearance for filling the tub or washing your hair.

The SRT-4572-STN is made from solid brass and is covered by a limited lifetime warranty. It is also WaterSense certified, meaning that it meets the EPA's standards for water efficiency.

Quick Install Guide Canterbury Roman Tub Faucet, SRT-4570
Step 8
Flush water supply lines
Step 5
Attach handles
Step 4
Attach valve assembly
Step 6
Connect water supply lines
and check for leaks
Step 2
Solder valve assembly together
Step 1
Cut copper tubing to length
nished deck
Step 3
Mount valve assembly
Step 7
Attach water spout
SRT-4570 ..............Chrome finish
SRT-4570-STN .....Satin Nickel finish
1 2 3 4
1/8"
WARNING: This product can expose you to chemicals including lead, which is known to the state of California to cause cancer, birth defects,
or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.
Roman Tub Faucet SRT-4570
Installation and Service Instructions
Canterbury®
Model Numbers Tools & Materials Need Help?
Symmons customer service:
Phone: (800) 796-6667
Monday - Friday 7:30 am - 6:00 pm EST
www.symmons.com/service
Compliance
ASME A112.18.1/CSA B125.1
Step 1 Cut copper tubing to length
Step 2 Solder valve assembly together
Length = (d) minus 2-1/4 inches (57 mm) divided by 2.
Example:
-
If center to center distance (d) is 14 inches.
-
14 inches minus 2-1/4 inches = 11-3/4 inches.
-
11-3/4 inches divided by 2 = 5-7/8 inches.
-
Cut 2 copper tubes into 5-7/8 inch lengths.
* Maximum distance (d) with supplied
copper tubing is 18-1/4 inches (463 mm)
center to center distance (d)*
1/2" (12.7 mm) copper tubing
Ensure valves are
parallel aligned
when soldering.
Step 3 Mount valve assembly to deck
Step 4 Attach valve assembly to deck
red
(hot)
blue (cold)
nished deck
front view
Thread down until
stop is reached
nished deck
front view
D1 D2
D1 = D2
Caution: If replacing an older faucet ensure water supply is
turned OFF before removing and then turn faucet handles ON
to relieve water pressure.
Installation Instructions
Page 2
Step 5 Attach faucet handles
Step 6 Solder supply lines to valve inlets
Step 7 Attach faucet spout to deck
OFF = CCW
OFF = CW
cold
hot
1/8"
Step 1 Remove faucet handle and collar
Step 2 Remove and replace cartridge
Step 3 Attach collar and faucet handle
Valve cartridge replacement
OFF = CCW
OFF = CW
Care of faucet finish
Clean nish area by using mild soap and water or non-abrasive
cleaner and then rinse immediately. A non-abrasive wax may
be used to preserve nish area.
Step 8 Flush water supply lines
Page 3
Symmons Industries, Inc. 31 Brooks Drive Braintree, MA 02184
Phone: (800) 796-6667 Fax: (800) 961-9621
Website: symmons.com Email: [email protected]
Copyright © 2019 Symmons Industries, Inc. ZV-579 REV C 091919
KN-113E
identified
by groove
KN-114E (hot)
OFF = CW
KN-113E (cold)
OFF = CCW
valve cartridge
LOCT-RB-KIT*
2 handles
included
plug button (2)
screw (2)
handle (2)
collar (2)
fastener (2)
gasket (2)
Replacement Parts
Part Number Item (Qty)
Parts Assembly Canterbury Roman Tub Faucet, SRT-4570
aerator
RT-106*
valve cartridge
ange nut
hot/cold identier
valvebody
copper tube
tee
Ordering replacement parts:
Call Symmons customer service at (800) 796-6667,
(781) 848-2250 M-F 7:30 am - 6:00 pm EST or
check our website at www.symmons.com for a
list of Symmons distributors.
Note: For decorative nish faucets add sufx
letters to parts marked with an asterisk.
*
plug button
hot/cold identier
screw
handle
collar
fastener
gasket
spout
plug button
screw
plug
centerbody
retainer
ange nut
3-13/16"
96 mm
3-1/8"
(80 mm)
2-1/16" (52 mm) dia.
Connect using
1/2" copper tubing
1" dia. (25 mm)
Hole size
1-1/16" (27 mm) min.
1-1/2" (38 mm) max.
Finished deck thickness
1-3/8" (35 mm) max.
Dimensions Canterbury Roman Tub Faucet, SRT-4570
8" (203 mm) min.
18-1/4" (464 mm) max. with
Symmons supplied copper tubing
3-15/16"
(101mm)
8-9/16" (218 mm)
10-11/16" (272 mm)
4"
102 mm 1-15/16"
48 mm
3"
76 mm
3-1/4"
83 mm
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4

Symmons SRT-4572-STN Installation guide

Category
Faucets
Type
Installation guide
This manual is also suitable for

Symmons SRT-4572-STN is a Roman tub faucet with a satin nickel finish. It is designed for durability and ease of use, with a variety of features that make it a great choice for any bathroom.

The faucet has a two-handle design, with hot and cold indicators on the handles. The handles are easy to grip and turn, even with wet hands. The faucet also has a high-arc spout that provides plenty of clearance for filling the tub or washing your hair.

The SRT-4572-STN is made from solid brass and is covered by a limited lifetime warranty. It is also WaterSense certified, meaning that it meets the EPA's standards for water efficiency.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI