2. Babbitt Steam Specialty
  3. CIRG-1.5

Babbitt Steam Specialty CIRG-1.5 Installation guide

  • Hello! I've reviewed the installation instructions for the Babbitt Chainwheel 1.5. The document provides a clear, step-by-step guide on how to install the chainwheel using U-straps, bolts, washers and nuts. The instructions are accompanied by images to assist with the installation process. I'm ready to answer any questions you may have about the installation process or other aspects of this product.
  • What is the first step in installing the chainwheel?
    How do you align the chainwheel?
    How many U straps are used to secure the chainwheel?
INSTALLATION INSTRUCTIONS FOR CHAINWHEEL NUMBER 1.5
1. Drop a U strap over the top of the valve
hand wheel.
2. Place the chainwheel against the front of
the valve hand wheel aligning the top slot
(12 o’clock) of the chainwheel to the holes
in the strap. Put one washer (if included) on
a bolt, pass the bolt through the slot in the
chainwheel from the front, pass through
both sides of the strap, and fasten loosely
with a lock washer (if included) and nut.
3. Follow step 2 to loosely secure the 2
remaining U straps, bolts, washers (if
included), and nuts.
4. Center the chainwheel and tighten the
nuts securely.
/