Watts CWS-300H Duplex Systems Installation guide
- Type
- Installation guide
Watts CWS-300H Duplex Systems are designed to provide reliable and efficient water softening for residential and commercial applications. These systems utilize a duplex configuration, which allows for continuous operation while one tank is regenerating. Key features of the CWS-300H Duplex Systems include:
- High flow rates of up to 60 gallons per minute (GPM)
- Operating pressures of up to 125 PSI
- Durable construction with a fiberglass-reinforced mineral tank and Noryl control valve
- Easy maintenance with quick-disconnect fittings and a simple-to-use control panel
The CWS-300H Duplex Systems are ideal for a variety of applications, including:
Watts CWS-300H Duplex Systems are designed to provide reliable and efficient water softening for residential and commercial applications. These systems utilize a duplex configuration, which allows for continuous operation while one tank is regenerating. Key features of the CWS-300H Duplex Systems include:
- High flow rates of up to 60 gallons per minute (GPM)
- Operating pressures of up to 125 PSI
- Durable construction with a fiberglass-reinforced mineral tank and Noryl control valve
- Easy maintenance with quick-disconnect fittings and a simple-to-use control panel
The CWS-300H Duplex Systems are ideal for a variety of applications, including:
FRONT VIEW
TOP VIEW
SIDE VIEW
ISOMETRIC VIEW
SIDE VIEW
1
1
2
2
3
3
4
4
5
5
6
6
7
7
8
8
A A
B B
C C
D D
DATE:
DATE:
NTS
4 /3 /20 2 3
CHD BY:
JR
JR
DWG BY:
4 /3 /20 2 3
SCALE:
SUPERSEDES:
SEE TABLE
T H IS D R A W IN G D IS C L O S E S C O N F ID E N T IA L A N D O T H E R D A T A O F A P R O PR IE T A R Y N A TU R E O W N E D B Y W A T T S W A T E R
T E C H N O LO G IE S , IN C A N D M A Y N O T B E U S E D O R D IS C L O S E D T O O T H E R S W IT H O U T T H E P R IO R W R IT T E N C O N S E N T O F W A T T S
W A T E R T E C H N O L O G IE S , IN C .
REV:
D
SIZE:
1
SEE TABLE
EDP NO.:
N/A
FILE TYPE:
PART NO.:
ESTIM ATED W EIGH T: SEE TABLE CAD
SEE TABLE
815 C HESTNU T ST.
NORTH AND OVER, MA 01845
LIM ITS UN LESS SPEC IFIED
FRAC TIONAL ANG ULAR
±1/32 ±1°
DECIM AL in[mm ]
.XXX[0.XX ] ±.125[3.175]
.XX[0.X] ±.25[6.35]
COM MO N AXIS in[m m]
.015[0.38] TIR
SUR FACE FIN IS H µin[µm eter]
12 5[3.2] RMS
_________________________
DO NOT SCALE D RAW IN G
SHEET:
1 O F 1
MATERIAL:
TITLE:
OTHER:
GENERAL INSTALLATION, SERIES CW S-300H DUPLEX
PROGRESSIVE SYSTEM S 3" W ATER SO FTENERS
NOTES:
1. ALL DIMENSIONS SHOW N IN TABLE ARE IN INCHES, UNLESS
OTHERW ISE NOTED & ARE ± 1 INCH (25MM).
2. ALL ITEMS SHOWN IN PHANTOM LINE ARE TO BE PROVIDED BY OTHERS.
3. ALL DIMENSIONS ARE SUBJECT TO CHANGE WITHOUT ANY NOTICE.
4. INSTALL UNIONS FITTINGS ON INLET, OUTLET & DRAIN PLUMBING
CONNECTIONS.
5. PROVIDE A 2 FEET MINIMUM CLEARANCE ABOVE MINERAL TANK FOR
FILLING MEDIA.
6. A GFCI EQUIPT ELECTRICAL OUTLET SHOULD BE PROVIDED W ITHIN 5
FEET OF EQUIPMENT LOCATION.
7. USE DIELECTRIC UNIONS ON PLUMBING CONNECTIONS OF CONTROL
VALVE WHEN DISSIM ILAR M ETALS ARE PRESENT.
8. PROVIDED SYSTEM SHALL NOT BE SUBJECT TO ANY VACUUM. IF RISK
OF VACUUM IS PRESENT, INSTALL SIPHON BREAK ON DRAIN LINE &
INSTALL VACUUM RELIEF VALVE WATTS ORDERING CODE # 0556031 ON
INLET LINE.
9. BRINE TANK DIM ENSIONS SHOW N ON TABLE ARE FACTORY SELECTED
FOR USE W ITH THE SPECIFIED SYSTEM SIZE.
10. DO NOT INSTALL DRAIN LINE DIRECTLY TO A DRAIN. FOR PROPER
DRAIN CONNECTION FOLLOW ALL NATIONAL, STATE AND LOCAL
CODES. DO NOT CONSTRUCT DRAIN LINE TO ELEVATIONS THAT
EXCEED 4 FEET ABOVE THE CONTROL VALVE'S DRAIN PORT.
11. THE FULL W EIGHT OF THE PIPING AND VALVES MUST BE SUPPORTED
BY PIPE HANGERS OR OTHER MEANS.
12. INLET AND OUTLET HEADERS NEED TO BE SIZED ACCORDING TO FLOW
RATE REQUIREM ENTS BY OTHERS.
13. POW ER REQUIREMENTS: 115V/60HZ 2.7 AMPS PER CONTROL VALVE
UNLESS OTHERWISE SPECIFIED.
14. BRINE TANK MUST BE LOCATED WITHIN 10 FEET OF SYSTEM CONTROL
VALVE AND ON A COMMON FLOOR ELEVATION WITH MINERAL TANK TO
ENSURE PROPER BRINE DRAW OPERATION.
15. USE A MINIMUM OF 1 INCH SCH. 40 PVC PIPING FOR CONSTRUCTION OF
BRINE LINE
16. LIMIT INLET PRESSURE TO NOT EXCEED MAXIMUM PUBLISHED
OPERATING PRESSURE.
SERIES CWS-300H DUPLEX PROGRESSIVE SYSTEMS DIMENSION (INCHES) & SPECIFICATIONS
MODEL NO.
ORDERING
CODES
(EDP NO.)
MINERAL
TANK
SIZE
INLET OUTLET OVERALL HEIGHT
(SEE NOTE 5)
OVERALL
DEPTH
OVERALL
WIDTH
MINIMUN
INLET PIPE
DISTANCE
BRINE TANK
(SEE NOTE 9)
CONTROL VALVE
INLET/OUTLET
PIPE SIZE (NPT)
DRAIN
CONN.
SIZE
(NPT)
SERVICE
FLOW GPM @
15 PSI DROP
PEAK
SERVICE
FLOW GPM
@ 25 PSI
DROP
DRAIN
FLOW
RATE
(GPM)
MIN/MAX
OPERATING
TEMP F°
MIN/MAX
OPERATING
PRESSURE
(PSI)
ESTIMATED
OPERATING
WEIGHT (LBS)
ESTIMATED
SHIPPING
WEIGHT (LBS)
M4610W TI-NH 68110803 24 X 72 80.75 80.75 84.5 24 73.4 7.0 30 X 50 3.0 1.0 240 340 15.0 34/110 25/125 6713 2140
M4612W TI-NH 68110804 30 X 72 80.75 80.75 84.5 30 79.6 9.5 39 X 48 3.0 1.5 316 424 25.0 34/110 25/125 10314 3200
M4614W TI-NH 68110805 36 X 72 80.75 80.75 84.5 36 84.6 12.0 39 X 48 3.0 1.5 370 500 35.0 34/110 25/125 13321 4030
M4616W TI-NH 68110806 42 X 72 80.75 80.75 84.5 42 92.6 14.5 42 X 60 3.0 2.0 400 536 45.0 34/110 25/125 17721 6490
M4618W TI-NH 68110807 48 X 72 80.75 80.75 84.5 48 106.6 17.0 50 X 60 3.0 2.0 426 560 60.0 34/110 25/125 24394 8590
CLIENT PROJECT SIGN-OFF
JOB NAME:
CONTRACTOR APPROVAL DATE:
CONTRACTOR:
JOB LOCATION:
CONTRACTOR APPROVAL:
CONTRACTOR PO NO:
ENGINEER:
ENGINEER APPROVAL:
ENGINEER APPROVAL DATE:
INLET
(SEE NOTE 12) OUTLET
(SEE NOTE 12)
OVERALL WIDTH
(SEE TABLE)
OVERALL DEPTH
(SEE TABLE)
MINIM UM INLET PIPE DISTANCE
(SEE TABLE)
MINERAL TANK
SAMPLE PORT
BYPASS VALVE
(NORMALLY CLOSED)
INLET/OUTLET
(SEE TABLE)
OVERALL HEIGHT
(SEE TABLE & NOTE 5)
DRAIN LINE
(SEE NOTE 10)
BRINE TANK
(SEE NOTE 14)
1" SCH 40 PVC PIPING
(SEE NOTE 15)
VACUUM RELIEF
(SEE NOTE 8)
HEADER PIPE
(SEE NOTE 12)
SAMPLE PORT
INLET UNION
ISOLATION VALVE
(SEE NOTE 4)
OUTLET UNION
ISOLATION VALVE
(SEE NOTE 4)
INLET/OUTLET PIPE SIZE
(SEE TABLE)
-
1
Watts CWS-300H Duplex Systems Installation guide
- Type
- Installation guide
Watts CWS-300H Duplex Systems are designed to provide reliable and efficient water softening for residential and commercial applications. These systems utilize a duplex configuration, which allows for continuous operation while one tank is regenerating. Key features of the CWS-300H Duplex Systems include:
- High flow rates of up to 60 gallons per minute (GPM)
- Operating pressures of up to 125 PSI
- Durable construction with a fiberglass-reinforced mineral tank and Noryl control valve
- Easy maintenance with quick-disconnect fittings and a simple-to-use control panel
The CWS-300H Duplex Systems are ideal for a variety of applications, including:
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
Other documents
-
Delfield N8600P Series User manual
-
Arctic Spas COY-ECONDIDO User manual
-
Cleveland Range HCWH2020 Datasheet
-
Delfield 8100-EF User manual
-
Munters CT CB Cooling Owner's manual
-
Delfield N8018 Specification
-
Swann Smith's Caspian EC 60 Installation, Commissioning And User Manual
-
-
aqua-pure CWS200ME Installation guide
-
Eagle Group 1848E Datasheet
