Mr. Gasket 51340G Operating instructions

REMOTE MOUNT

SOLENOID KIT 51340G

This kit is designed to eliminate hot start problems that are common with starter mounted solenoids. It also

provides easy access to tap into the wiring system. This solenoid kit does NOT use suppression diodes to

protect the electrical system. Do not use this kit on late model vehicles with computer controlled electronics.

“S” to Ignition

switch +

“I/R” to Coil +

if needed

< Positive (+)

battery cable

Positive “B” (+) starter

terminal on starter solenoid

Small “S” spade

terminal on starter

solenoid

SI/R

< Positive (+)

10 Gauge wire >

“M” to Starter motor

Starter

Solenoid

Battery