ICUSB128410
Installation Guide
Warranty Information
This product is backed by a one year warranty.
In addition, StarTech.com warrants its products against defects in materials
and workmanship for the periods noted, following the initial date of purchase. During this period, the products may be returned for repair, or replacement with
equivalent products at our discretion. The warranty covers parts and labor costs only. StarTech.com does not warrant its products from defects or damages arising
from misuse, abuse, alteration, or normal wear and tear.
Limitation of Liability
In no event shall the liability of StarTech.com Ltd. and StarTech.com USA LLP (or their officers, directors, employees or agents) for any damages (whether direct
or indirect, special, punitive, incidental, consequential, or otherwise), loss of profits, loss of business, or any pecuniary loss, arising out of or related to the use of
the product exceed the actual price paid for the product. Some states do not allow the exclusion or limitation of incidental or consequential damages. If such laws
apply, the limitations or exclusions contained in this statement may not apply to you.
Packaging Contents
1 x ICUSB128410 adapter cable•
1 x Driver Mini CD•
1 x User Manual•
System Requirements
Available USB port•
Microsoft Windows•
®
98SE/ME/2000/XP/Vista
Installation
Windows 2000/XP/Vista
No driver installation is required for these operating sys-
tems, as they this adapter cable is natively supported, so
the drivers are already installed.
Windows 98SE/ME
Power on the computer and make sure that the USB 1.
port is enabled and working properly.
Plug the ICUSB128410 adapter cable into the USB port 2.
and Windows will detect the IEEE1284 device and run
the Add New Hardware Wizard to assist you in setting
up the new device. Click “Next”.
Insert the provided driver mini CD into the CD-ROM 3.
drive and click “Next”. For Windows 98, click “Search” for
the best driver for your device and click to search driver
from the CD-ROM drive.
Windows will detect the driver (U2PAR.INF). Click “Next” 4.
to continue.
Click “Next” and let Windows copy the needed files to 5.
your hard disk.
When Windows finishes installing the required software, 6.
click “Finish”.
Specications
Bus Interface USB 1.1
Connectors
USB type A
Centronics 36 (male)
Cable Length 10 feet
Protocol Specification IEEE1284-1994
Operating Temperature 5~40
o
C
Storage Temperature -20~60
o
C
Operating System Support
Windows 98SE/ME/2000/
XP/Vista
/
