KYOCERA KM-5050 User manual

Operation Guide

KM-NET for Clients

Legal and General Information

Notice

Unauthorized reproduction of all or part of this guide is prohibited. The information in

this guide is subject to change without notice.

Kyocera Mita cannot be held liable for any problems arising from the use of this product,

regardless of the information herein.

Regarding Trademarks

KYOCERA, KYOCERA MITA, ECOSYS and PRESCRIBE are registered trademarks of

Kyocera Corporation.

KPDL and KIR (Kyocera Image Refinement) are trademarks of Kyocera Corporation.

Microsoft, Windows and Windows NT are registered trademarks of Microsoft

Corporation.

Apple, AppleTalk, Mac, Macintosh, Mac OS and TrueType are registered trademarks of

Apple Computer, Inc.

Adobe, Acrobat and Postscript are registered trademarks of Adobe Systems

Incorporated.

Novell and NetWare are registered trademarks of Novell, Inc.

HP and PCL are registered trademarks of Hewlett-Packard Company.

Intel, Pentium and Celeron are registered trademarks of Intel Corporation.

Other brand and product names contained in this document are registered trademarks

or trademarks of their respective companies.

General Information

When using this utility, the items that can be configured will differ depending on the

model of your printing system or multifunctional printer (hereinafter referred to as

"printing system").

Examples in this document are described in terms of the Internet Explorer 6.0 and

Microsoft Windows XP operating system environment.

1. Features................................................................................................................. 1

1.1. What is KM-NET for Clients?.......................................................................... 1

1.2. System Requirements..................................................................................... 1

1.3. Support Language .......................................................................................... 2

2. Installation and Startup........................................................................................ 3

2.1. Installation....................................................................................................... 3

2.2. Startup ............................................................................................................ 3

3. Main Screen........................................................................................................... 4

3.1. Views and Buttons.......................................................................................... 4

3.2. Settings........................................................................................................... 8

4. Add Printing System Wizard.............................................................................. 10

4.1. Adding the Printing Systems Using Standard Mode..................................... 10

4.2. Adding the Printing Systems Using Advanced Mode.................................... 11

4.3. Adding the Printing Systems Using History Mode ........................................ 14

5. Properties ............................................................................................................ 15

5.1. Accessing the Properties Dialog Box............................................................ 15

5.2. Status Tab..................................................................................................... 16

5.3. Input Tab....................................................................................................... 17

5.4. Output Tab.................................................................................................... 17

5.5. Media Tab..................................................................................................... 18

5.6. Printer Tab.................................................................................................... 19

5.7. Copy Tab ...................................................................................................... 20

5.8. Scan Tab....................................................................................................... 21

5.9. FAX Basic Tab.............................................................................................. 22

5.10. FAX Advanced Tab....................................................................................... 25

5.11. Resources Tab.............................................................................................. 27

5.12. Consumable Tab........................................................................................... 28

5.13. Counters Tab................................................................................................ 28

5.14. Management Tab.......................................................................................... 29

5.15. Interface Tab................................................................................................. 31

6. Address Book...................................................................................................... 32

6.1. Address Book Window.................................................................................. 32

6.2. Search and Filtering Functions..................................................................... 34

6.3. Edit Address Dialog Box............................................................................... 35

6.4. Edit Group Dialog Box .................................................................................. 41

6.5. Adding Members........................................................................................... 42

7. Job Manager........................................................................................................ 44

7.1. What is Job Manager?.................................................................................. 44

7.2. Using the Job Manager................................................................................. 44

8. Job Viewer........................................................................................................... 46

8.1. What is Job Viewer?..................................................................................... 46

8.2. Using the Job Viewer.................................................................................... 46

9. Broadcast ............................................................................................................ 48

9.1. Broadcast...................................................................................................... 48

9.2. FRPO Parameter Setting.............................................................................. 49

10. Document Box..................................................................................................... 50

10.1. Document Box Window................................................................................. 50

10.2. Creating or Deleting a Document Box .......................................................... 53

10.3. Editing a Document Box ............................................................................... 54

11. Troubleshooting.................................................................................................. 56

Table of Contents

Operation Guide

1

Features

1. Features

1.1. What is KM-NET for Clients?

KM-NET for Clients is a network utility intended for use to monitor and configure the

printing systems and maintain e-MPS (enhanced-Multiple Printing System) jobs in

storage devices. Monitoring the status of the printing system in real-time, confirming

and modifying default settings and manipulating jobs stored temporarily or permanently

can all be implemented between computers and printing systems.

1.2. System Requirements

KM-NET for Clients operates in the following environment. Check the requirements

before installation.

† Administrator rights are required for installation.

Note

When the printing system is used locally, conform that KX Driver has already been

installed before using KM-NET for Clients.

Item Description

OS Microsoft Windows 98 SE/Me (Not supported depending on the

model)

Microsoft Windows 2000 Professional

†

Microsoft Windows Server 2000/2003

†

Microsoft Windows XP Home Edition/Professional Edition

†

Microsoft Windows Vista

†

Web Browser Microsoft Internet Explorer 5.5 or later

Hardware A processor equivalent to a Pentium 200 MHz or greater

At least 32 MB of free memory

At least 10 MB of free hard disk space

SVGA (800 × 600, 256 color) or greater

A sound card capable of playing WAV files (optional)

Protocol TCP/IP

IPX/SPX

Interface Ethernet (10BASE-T/100BASE-TX)

Parallel (IEEE1284)

USB

MFP

Printer

KM-NET

Features

2

KM-NET for Clients

1.3. Support Language

KM-NET for Clients supports the following languages: Arabic, Brazilian Portuguese,

Czech, Danish, Dutch, English, Farsi, Finish, French, German, Hebrew, Hungarian,

Italian, Lithuanian, Japanese, Korean, Norwegian, Polish, Russian, Simplified Chinese,

Spanish, Swedish, Traditional Chinese and Turkish.

Operation Guide

3

Installation and Startup

2. Installation and Startup

2.1. Installation

Install KM-NET for Clients on your computer.

Note

Before installing this application, check that the KX driver is installed on the computer.

KX Driver is on the CD-ROM supplied with the printing system.

Insert the CD-ROM that came with the printing system into the optical drive of the

computer.

The installation program starts up automatically. Follow the installation instructions.

2.2. Startup

When the installation is completed, start the KM-NET for Clients by proceeding from

the start menu > All Programs > Kyocera > KM-NET for Clients.

Main Screen

4

KM-NET for Clients

3. Main Screen

3.1. Views and Buttons

The main screen is explained below.

The following table explains the views and buttons on the main screen of KM-NET for

Clients.

The numbers appearing in the figure above are referred to in the Reference Number

column on the following pages.

Note

The explanations of messages appearing in this manual are based on the premise that

the printing system is used over a network. Accordingly, the explanations include some

messages that do not appear when the printing system is used locally.

1

2

4

9

8

3

5

6

10

7

Operation Guide

5

Main Screen

Ref.

No.

Name and Icon Description

1

Connection View The Connection View displays connected printing

system icons for that have been discovered

through the printer discovery process.

A maximum of five printing system icons can be

displayed in this view. Each icon describes the

status of the printing system.

Add button

Click this button to start the wizard.

Follow instructions to add the printing

system.

Remove button

Select the icon for the desired printing

system within the Connection view, and

click this button to remove the printing

system.

Ready

Not connected

Error

Warning

Sleep

Main Screen

6

KM-NET for Clients

2

Information View The Information View describes the status of the

printing system in greater detail. Green indicates

normal status and red indicates that a problem has

occurred.

Click the triangular icon circled in red in the left

diagram to switch screens.

Depending on a model, the status icons shown in

the information view is different.

Status Icon Pattern 1

The printing system is ready to print.

The paper runs out or the cassette is not

installed properly.

A paper jam has occurred.

Toner is low or runs out. When the toner

becomes low, the icon blinks. When the

loner runs out, the icon lights up.

An error has occurred.

Status Icon Pattern 2

The printing system is ready to print.

An error occurs for printing.

The printing system is ready to scan.

An error occurs for scanning.

The printing system is ready to fax.

An error occurs for fax.

Switch status information by clicking the icons

circled by red in the left images.

The various type of icons are displayed on

Information View according to options attached to

printing system and specific features. For details,

refer to online help.

Ref.

No.

Name and Icon Description

Operation Guide

7

Main Screen

3

3D View 3D View can be set up to display a 3D rendering of

the selected printing system. It displays the status

of the printing system in real-time.

For example, if the top cover of the printing system

is opened, the top cover of the 3D image also

opens.

4

Properties Button Click this button to open the properties dialog box.

The dialog box displays detailed information about

the printing system.

For details, refer to the section Properties.

5

Job Manager Button

Job Viewer Button

Click the Job Manager button to open the Job

Manager window and click the Job Viewer button

to open the Job Viewer window.

These windows enable the user to obtain job

information and administer jobs stored in the

storage devices in the printing system.

These buttons are available only when a hard disk

is installed. The button to be displayed will differ

depending on the model.

For details, refer to Job Manager on page 44 or Job

Viewer on page 46.

6

Broadcast Button Click this button to open the Broadcast dialog box.

For details, refer to Broadcast.

7

Document Box Button Click this button to open the Document Box

window. For details, refer to Document Box on

page 50.

8

Setup Button The Setup button has 2 tabs.

For details, refer to Settings.

Status Polling Tab

Set up a polling interval and audible notification for

device error conditions here.

Appearance Tab

Set up a 3D image view and the appearance of this

utility here.

9

Help Button The Help button displays the Help window.display

Ref.

No.

Name and Icon Description

Main Screen

8

KM-NET for Clients

3.2. Settings

When operating KM-NET for Clients, you can change settings for polling interval,

audible (error) notification, whether you want to use the 3D virtual printing system to

monitor the printing system status, etc.

1 Click SETUP on the main screen. The KM-NET for Clients dialog box appears.

2 Configure the settings for status polling and appearance.

Status Polling Tab

Polling

When Polling is activated (check box checked),

KM-NET for Clients logs itself

onto the printing system and automatically recognizes printing system changes at

predetermined intervals. The interval can be configured by moving the slider with

the mouse. The default setting is 5 seconds. Polling should normally be left

activated (check box checked).

Audible notification

When Audible notification is activated (check box checked), a sound is played

when an error occurs. Specify the WAVE file (.wav file extension) by clicking

Browse and browsing for the folder that contains it.

10

Title Bar Click in the title bar to display the menu.

About KM-NET for Clients

Displays the version information on KM-NET for

Clients.

Ref.

No.

Name and Icon Description

Operation Guide

9

Main Screen

Appearance Tab

Show 3D image

This displays the 3D virtual printing system for monitoring the status of the printing

system.

3D accelerator

Select the method which the PC renders the 3D image. The default is Software

rendering. Selecting Hardware rendering may improve the performance of

rendering the 3D image depending on the hardware requirement.

Show on Taskbar

When minimizing the main screen, the taskbar button will disappear from the task

tray, and an application icon will be displayed in the task tray. When clicking the

icon, the main screen resizes.

When an error occurs, the main screen with the type of error notification will be

displayed.

If the box is unchecked, then a minimized button will be displayed on the task bar.

Always on top

Error notification is given by a message that is displayed on top of all other

windows that may be currently open on the desktop.

Add Printing System Wizard

10

KM-NET for Clients

4. Add Printing System Wizard

To search for printing systems to be registered, click Add . The Add Printing

System Wizard starts.

4.1. Adding the Printing Systems Using Standard Mode

To add the printing systems using standard mode, perform the following procedure.

1 Select Standard.

2 Select the check box for Network or Local connection according to the desired

printing system.

3 Click Next.

4 Perform the instructions displayed by the wizard. The instructions are different

depending on the connection type selected above.

Operation Guide

11

Add Printing System Wizard

5 After searching completes, the searched printing systems are displayed. Up to five

desired printing systems can be selected. To select multiple printing systems,

press and hold Ctrl key and click on the desired printing system name.

6 Click Finish to return the main screen. The Connection View displays the icon for

the selected printing system.

4.2. Adding the Printing Systems Using Advanced Mode

Advanced mode has the following three options below to find the printing systems.

Local Printer

To add printing system using local printer option, perform the following procedure.

1 Select Advanced.

2 Click Next.

Option Description

Local printer Finds the printing system by selecting the local printer

name installed on PC.

Network address Finds the printing system by entering the network

address.

Import printing systems Imports printing systems from the selected file.

Add Printing System Wizard

12

KM-NET for Clients

3 Select Local printer.

4 Click Next.

5 Perform the instructions displayed by the wizard.

Network Address

To add printing system using network address option, perform the following procedure.

1 Select Advanced.

2 Click Next.

3 Select Network address.

4 Click Next.

5 Select the protocol for printing system discovery.

6 Perform the instructions displayed by the wizard. The instructions are different

depending on the protocol selected above.

Operation Guide

13

Add Printing System Wizard

Import Printing Systems

To add printing system using import printing systems option, perform the following

procedure.

1 Select Advanced.

2 Click Next.

3 Select Import printing systems.

4 Click Next.

5 Select one data file to import network address. The data file that can be imported

is the CSV file exported by Network Print Monitor.

6 Click Next.

7 Perform the instructions displayed by the wizard.

Add Printing System Wizard

14

KM-NET for Clients

4.3. Adding the Printing Systems Using History Mode

History mode displays the printing systems that were previously searched using

standard mode or IP range discover in advanced mode.

To add the printing system using history mode, perform the following procedure.

1 Select History.

2 Click Next. The printing systems that were previously searched are displayed.

3 Select the desired printing system up to five. To select multiple printing systems,

press and hold Ctrl key and click on the desired printing system name.

4 Click Finish.

Operation Guide

15

Properties

5. Properties

5.1. Accessing the Properties Dialog Box

When you click the Properties button on the main screen, the printing system

properties dialog box as shown below appears. For details of the property items, refer to

Help.

Notes

• The contents of the printing system property will be different depending on the printing

system model, the installed optional devices, and whether the printing system is

connected via network interface or local interface. Also, if the printing system does not

support color printing, only the level of remaining black toner will be displayed.

• The default settings and the range of possible values in this utility may be different

depending on the printing system model. For details, refer to the Operation Guide of

the each printing system.

• When a password is set for the printing system, pressing the Properties button

displays the screen for entering the password. Enter your password and click OK. The

properties dialog box appears.

• If you have set the user login function for the printing system, a login prompt will

appear. Enter login user name and login password and click OK. The properties

dialog box appears.

• If you are instructed during configuration, turn the printing system off and on.

Properties

16

KM-NET for Clients

5.2. Status Tab

Displays the current condition of the printing system.

If an error occurs, Trouble tips appears instead of General information like below.

Page is loading ...

KYOCERA KM-5050 User manual

KYOCERA KM-5050 User manual

Related papers

Other documents