Kathrein 218362 Datasheet

Category
Mounting kits
Type
Datasheet

This manual is also suitable for

57
Mounting accessories
Mast relay set
ZTH 01 218362
Q
For xing masts with an allowable bending moment of
max. 1,650 Nm
Q
With extra strut and xture for upright alignment of the mast
Q
In combination with ZAS 02 suitable for wall mounting of 60 cm,
75 cm and 90 cm offset parabolic antennas
Q
Max. forces exerted on the xing points (hole diameter of xing
points: 11.5 mm) if a 90 cm antenna is used:
- pressure 300 N; - pull 300 N; - shearing strain 835 N
Q
Packing unit/weight (pc./kg): 1 (4)/5.1
Mast holder at the bottom
ZTH 12 218364
Q
To x mast with an allowable bending moment of max. 1,650 Nm
Q
Packing unit/weight (pc./kg): 1 (2)/3.2
ZTH 12
ZTH 13
Mast holder at the top
ZTH 13 218365
Q
To x mast with an allowable bending moment of max. 1,650 Nm
Q
Packing unit/weight (pc./kg): 1 (2)/2.9
  • Page 1 1

Kathrein 218362 Datasheet

Category
Mounting kits
Type
Datasheet
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI