Kathrein 218 362 Datasheet

Mounting accessories

Mast relay set

ZTH 01 218362

For ﬁ xing masts with an allowable bending moment of

max. 1,650 Nm

With extra strut and ﬁ xture for upright alignment of the mast

In combination with ZAS 02 suitable for wall mounting of 60 cm,

75 cm and 90 cm offset parabolic antennas

Max. forces exerted on the ﬁ xing points (hole diameter of ﬁ xing

points: 11.5 mm) if a 90 cm antenna is used:

- pressure 300 N; - pull 300 N; - shearing strain 835 N

Packing unit/weight (pc./kg): 1 (4)/5.1

Mast holder at the bottom

ZTH 12 218364

To ﬁ x mast with an allowable bending moment of max. 1,650 Nm

Packing unit/weight (pc./kg): 1 (2)/3.2

ZTH 12

ZTH 13

Mast holder at the top

ZTH 13 218365

To ﬁ x mast with an allowable bending moment of max. 1,650 Nm

Packing unit/weight (pc./kg): 1 (2)/2.9

This manual is also suitable for

Download PDF