Gigabyte MC62-G40 User manual

Category
Servers
Type
User manual
MC62-G40
AMD Ryzen™ Threadripper™ PRO Workstation Board
User Manual
Rev. 1.0
Copyright
© 2021 GIGA-BYTE TECHNOLOGY CO., LTD. All rights reserved.
The trademarks mentioned in this manual are legally registered to their respective owners.
Disclaimer
Information in this manual is protected by copyright laws and is the property of GIGABYTE.
Changes to the specifications and features in this manual may be made by GIGABYTE
without prior notice. No part of this manual may be reproduced, copied, translated, transmitted, or
published in any form or by any means without GIGABYTE's prior written permission.
Documentation Classications
In order to assist in the use of this product, GIGABYTE provides the following types of documentation:
 UserManual:detailedinformation&stepsabouttheinstallation,congurationandusethis
product (e.g. motherboard, server barebones), covering hardware and BIOS.

User Guide: detailed information about the installation & use of an add-on hardware or
  softwarecomponent(e.g.BMCrmware,rail-kit)compatiblewiththisproduct.
Quick Installation Guide: a short guide with visual diagrams that you can reference easily for
installation purposes of this product (e.g. motherboard, server barebones).
Please see the support section of the online product page to check the current availability of these
documents
For More Information
Forrelatedproductspecications,thelatestrmwareandsoftware,andotherinformation,pleasevisit
our website at: http://www.gigabyte.com.
For GIGABYTE distributors and resellers, additional sales & marketing materials are available from our
reseller portal: http://reseller.b2b.gigabyte.com
For further technical assistance, please contact your GIGABYTE representative or visit
http://esupport.gigabyte.com/ to create a new support ticket.
For any general sales or marketing enquires, you may message GIGABYTE server directly by
email: server[email protected].
- 3 -
Table of Contents
MC62-G40 Motherboard Layout ...................................................................................... 5
Block Diagram .................................................................................................................7
Chapter 1 Hardware Installation .....................................................................................8
1-1 Installation Precautions .................................................................................... 8
1-2 ProductSpecications ...................................................................................... 9
1-3 Installing and Removing the CPU and Heat Sink ........................................... 11
1-4 Installing and Removing Memory ................................................................... 12
1-4-1 8-ChannelMemoryConguration ..........................................................................12
1-4-2 Installing and Removing a Memory Module ..........................................................13
1-5 Installing and Removing the M.2 SSD Module ............................................... 14
1-6 Installing and Removing the M.2 WiFi Module ............................................... 14
1-7 Back Panel Connectors .................................................................................. 15
1-8 Internal Connectors ........................................................................................ 17
1-9 Jumper Settings ............................................................................................. 25
Chapter 2 BIOS Setup ..................................................................................................26
2-1 The Main Menu .............................................................................................. 28
2-2 Advanced Menu ............................................................................................. 31
2-2-1 Trusted Computing .................................................................................................32
2-2-2 AST2600SuperIOConguration ...........................................................................34
2-2-3 S5 RTC Wake Settings ...........................................................................................36
2-2-4 Serial Port Console Redirection .............................................................................37
2-2-5 CPUConguration ..................................................................................................41
2-2-6 PCI Subsystem Settings .........................................................................................42
2-2-7 USBConguration ..................................................................................................44
2-2-8 NetworkStackConguration ..................................................................................46
2-2-9 NVMeConguration ...............................................................................................47
2-2-10 SATAConguration.................................................................................................48
2-2-11 GraphicOutputConguration .................................................................................49
2-2-12 AMDMemCongurationStatus .............................................................................50
2-2-13 TlsAuthConguration ............................................................................................51
2-2-14 iSCSIConguration ................................................................................................52
2-2-15 Intel(R) I210 Gigabit Network Connection ..............................................................53
2-2-16 Intel X550 10GBASE-T Network Connection .........................................................55
2-2-17 VLANConguration ................................................................................................57
2-2-18 MACIPv4NetworkConguration ...........................................................................58
2-2-19 MACIPv6NetworkConguration ...........................................................................59
- 4 -
2-3 AMD CBS Menu ............................................................................................. 60
2-3-1 CPU Common Options ...........................................................................................61
2-3-2 DF Common Options ..............................................................................................63
2-3-3 UMC Common Options ..........................................................................................66
2-3-4 NBIO Common Options ..........................................................................................74
2-3-5 FCH Common Options ...........................................................................................78
2-3-6 SOC Miscellaneous Control ...................................................................................79
2-3-7 Chipset Common Options ......................................................................................80
2-4 AMD PBS Menu ............................................................................................. 81
2-4-1 RAS ........................................................................................................................82
2-5 Chipset Setup Menu ....................................................................................... 84
2-5-1 North Bridge ...........................................................................................................85
2-6 Server Management Menu ............................................................................. 86
2-6-1 System Event Log ..................................................................................................88
2-6-2 View FRU Information ............................................................................................89
2-6-3 BMCVLANConguration .......................................................................................90
2-6-4 BMCNetworkConguration ...................................................................................91
2-6-5 IPv6BMCNetworkConguration ...........................................................................92
2-7 Security Menu ................................................................................................ 93
2-7-1 Secure Boot ...........................................................................................................94
2-8 Boot Menu ...................................................................................................... 96
2-9 Save & Exit Menu ........................................................................................... 98
2-10 BIOS Recovery .............................................................................................. 99
2-11 BIOS POST Beep code (AMI standard) ....................................................... 100
2-11-1 PEI Beep Codes ...................................................................................................100
2-11-2 DXE Beep Codes .................................................................................................100
- 5 -
MC62-G40 Motherboard Layout
CPU
DIMM-D
DIMM-C
DIMM-B
DIMM-A
DIMM-E
DIMM-F
DIMM-G
DIMM-H
1 2 3 4 5 6 87 9
16
10
11
12
13
14
15
17
1819
25
26
21222324 20
27
28
29
30
31
32
33 34
35
36
38
37
39 40 41 42 43 44 45
- 6 -
Item Code Description
1 LED_BMC BMC Firmware Readiness LED
2 CN_NCSI NCSI Connector
3 Audio Audio Connectors
4 10G_LAN 10GbE LAN Ports
5 USB3_MLAN1 Server Management LAN Port (Top)/ USB 3.2 Ports (Bottom)
6 USB3_LAN_1 GbE LAN Port (Top)/ USB 3.2 Ports (Bottom)
7 R_USB32C/USB32A USB 3.2 Type A Port (Top)/ USB 3.2 Type C Port (Bottom)
8 SW_ID ID Button with LED
9 VGA_1 VGA Port
10 M2E1 M.2 Slot (WiFi/BT Module, Support NGFF-2230)
11 TPM1 TPM Connector
12 CPU_FAN CPU Fan Connector
13 ATX 2x12 Pin Main Power Connector
14 P12V_AUX1 2x4 Pin 12V Power Connector (for CPU)
15 P12V_AUX2 2x4 Pin 12V Power Connector (for PCIe)
16 P_X4_M2_A M.2 Slot (PCIe Gen4 x4, Support NGFF-2280)
17 BAT Battery Socket
18 SL_CN1 SlimLine SAS 4i Connector (SATA III/PCIe Gen4 x4 Signal)
19 SL_CN2 SlimLine SAS 4i Connector (SATA III/PCIe Gen4 x4 Signal)
20 SL_CN3 SlimLine SAS 4i Connector (SATA III/PCIe Gen4 x4 Signal)
21 SATA_0_1 SATA III 6Gb/s Connector #0/#1
22 SATA_2_3 SATA III 6Gb/s Connector #2/#3
23 PMBUS1 PMBus Connector
24 FP_1 Front Panel Header
25 P_X4_M2_B M.2 Slot (PCIe Gen4 x4, Support NGFF-2280)
26 FUSB30_2 Front Panel USB 3.2 Connector #2
27 FUSB30_1 Front Panel USB 3.2 Connector #1
28 SYS_FAN7 System Fan Connector #7
29 SYS_FAN8 System Fan Connector #8
30 SYS_FAN6 System Fan Connector #6
31 BP_1 HDD Back Plane Board Connector
32 SYS_FAN1 System Fan Connector #1
33 SYS_FAN2 System Fan Connector #2
34 SYS_FAN3 System Fan Connector #3
35 IPMB IPMB Connector
36 SYS_FAN4 System Fan Connector #4
37 SYS_FAN5 System Fan Connector #5
38 COM1 Serial Port Connector
39 PCIEX16_1 PCIe x16 Slot (Gen4 x16)
40 PCIEX8_2 PCIe x16 Slot (Gen4 x8)
41 PCIEX16_3 PCIe x16 Slot (Gen4 x16)
42 PCIEX16_4 PCIe x16 Slot (Gen4 x16)
43 PCIEX16_5 PCIe x16 Slot (Gen4 x16)
44 PCIEX16_6 PCIe x16 Slot (Gen4 x16)
45 PCIEX16_7 PCIe x16 Slot (Gen4 x16)
- 7 -
Block Diagram
- 8 -
Hardware Installation
1-1 Installation Precautions
The motherboard contains numerous delicate electronic circuits and components which can
become damaged as a result of electrostatic discharge (ESD). Prior to installation, carefully read
the user's manual and follow these procedures:
Prior to installation, do not remove or break motherboard S/N (Serial Number) sticker or
warranty sticker provided by your dealer. These stickers are required for warranty validation.
Always remove the AC power by unplugging the power cord from the power outlet before
installing or removing the motherboard or other hardware components.
When connecting hardware components to the internal connectors on the motherboard,
make sure they are connected tightly and securely.
When handling the motherboard, avoid touching any metal leads or connectors.
It is best to wear an electrostatic discharge (ESD) wrist strap when handling electronic
components such as a motherboard, CPU or memory. If you do not have an ESD wrist
strap,keepyourhandsdryandrsttouchametalobjecttoeliminatestaticelectricity.
Prior to installing the motherboard, please have it on top of an antistatic pad or within an
electrostatic shielding container.
Before unplugging the power supply cable from the motherboard, make sure the power
supply has been turned off.
Before turning on the power, make sure the power supply voltage has been set according to
the local voltage standard.
Before using the product, please verify that all cables and power connectors of your
hardware components are connected.
To prevent damage to the motherboard, do not allow screws to come in contact with the
motherboard circuit or its components.
Make sure there are no leftover screws or metal components placed on the motherboard or
within the computer casing.
Do not place the computer system on an uneven surface
.
Do not place the computer system in a high-temperature environment.
Turning on the computer power during the installation process can lead to damage to
system components as well as physical harm to the user.
If you are uncertain about any installation steps or have a problem related to the use of the
product,pleaseconsultacertiedcomputertechnician.
Chapter 1 Hardware Installation
- 9 -
Hardware Installation
1-2 Product Specications
Form Factor CEB
305W x 267D (mm)
CPU AMD Ryzen™ Threadripper™ Pro 3000WX processors
Processor up to 64-core, 128 threads; TDP up to 280W
Chipset AMD WRX80
Memory 8 x DIMM slots
DDR4 memory supported only
8 channel memory architecture
Support for 3200/2933/2666/2400/2133 MHz; ECC & non-ECC; buffered &
unbuffered; UDIMM, RDIMM, 3DS R-DIMM, LRDIMM
Total up to 2TB of system memory (256GB single LRDIMM capacity)
NOTE: When installing memory modules, make sure to begin with the first
socket of each channel, such as DIMM_P0_A0, DIMM_P0_B0, DIMM_P0_C0,
DIMM_P0_D0
LAN 2 x 10GbE LAN (Intel® X550-AT2)
1 x GbE LAN (Intel® i210)
1 x 10/100/1000 Management LAN
Video Integrated in Aspeed® AST2600
2D Video Graphic Adapter with PCIe bus interface
1920x1200@60Hz 32bpp
Audio Realtek® ALC4080 HD audio codec
Supports7.1channelcongurations
3 ports Audio Jack (Audio in/Audio out/Mic)
Storage Interface
4 x SATA III 6Gb/s ports
2 x M.2 slot for storage (PCIe Gen4 x4 or SATA III 6Gb/s)
3 x SlimSAS ports (PCIe Gen4 x4 or 4x SATA III 6Gb/s each)
RAID RAID 0, RAID 1, RAID5 and RAID 10
Expansion Slots Slot_7: 1 x PCIe x16 (Gen4 x16) slot
Slot_6: 1 x PCIe x16 (Gen4 x16) slot
Slot_5: 1 x PCIe x16 (Gen4 x16) slot
Slot_4: 1 x PCIe x16 (Gen4 x16) slot
Slot_3: 1 x PCIe x16 (Gen4 x16) slot
Slot_2: 1 x PCIe x16 (Gen4 x8) slot
Slot_1: 1 x PCIe x16 (Gen4 x16) slot
2 x M.2 slot:
- M-key
- PCIe Gen4 x4 or 4x SATA 6Gb/s
- Supports NGFF-2242/2280 cards
NOTE:
We reserve the right to make any changes to the product specications and product-related
information without prior notice.
- 10 -
Hardware Installation
Expansion Slots
(Continued)
1 x M.2 slot for Wi-Fi:
- E-key
- Supports NGFF-2230 card
3 x U.2 connector:
- SlimSAS type
- PCIe Gen4 x4 or 4x SATA III 6Gb/s
Internal I/O
Connectors
1 x 24-pin ATX main power connector
2 x 8-pin ATX 12V power connector
1 x CPU fan header
1 x PCH fan header
8 x System fan headers
2 x USB 3.0 headers for 4 ports
1 x PMBus connector
4 x SATA III 6Gb/s ports
2 x M.2 slot for storage
1 x M.2 slot for Wi-Fi
3 x U.2 connector
1 x Front panel header
1 x Back plane board header
1 x PMBus header
1 x IPMB header
1 x TPM header
1 x COM header
Rear I/O
Connectors
1 x VGA
1 x ID Button
2 x USB 3.2 gen2 (Type-A + Type-C®)
1 x RJ45 (GbE LAN)
1 x MLAN
4 x USB 3.2 gen2 Type-A
2 x RJ45 (red) (10GbE LAN)
1x3in1Audiojacks
TPM 1 x TPM header with SPI interface
Optional TPM2.0 kit: CTM010
Board
Management
Aspeed® AST2600 management controller
GIGABYTE Management Console (AMI MegaRAC SP-X) web interface
Socket
Socket
Security
Security
Operating
Properties
Operating temperature: 10°C to 40°C
Operating humidity: 8-80% (non-condensing)
Non-operating temperature: -40°C to 60°C
Non-operating humidity: 20%-95% (non-condensing)
- 11 -
Hardware Installation
1-3 Installing and Removing the CPU and Heat Sink
Follow these instructions to Install the CPU:
1. Loosen the three captive screws in sequential order (1g2g3) securing the CPU cover.
2. Flip open the CPU cover.
3. Remove the CPU cap with CPU from the CPU frame using the handle on the CPU cap.
4. Using the handle on the CPU cap insert the new CPU cap with CPU installed into the CPU frame.
Note: Ensure that the CPU is installed in the CPU cap in the correct orientation, with the gold triangle
on the CPU aligned to the top left corner of the CPU cap.
5 Flip the CPU frame with CPU installed into place in the CPU socket.
Read the following guidelines before you begin to install the CPU:
Make sure that the motherboard supports the CPU.
Always turn off the computer and unplug the power cord from the power outlet before installing
the CPU to prevent hardware damage.
Unplug all cables from the power outlets.
Disconnect all telecommunication cables from their ports.
Placethesystemunitonaatandstablesurface.
Open the system according to the instructions.
WARNING!
Failure to properly turn off the server before you start installing components may cause serious
damage. Do not attempt the procedures described in the following sections unless you are a
qualiedservicetechnician.
3
3
1
1
2
2
1
External cap
2
3
CPU
4
5
7
1
1
3
3
2
2
6
8
9
3
3
1
1
2
2
44
- 12 -
Hardware Installation
1-4 Installing and Removing Memory
Read the following guidelines before you begin to install the memory:
Make sure that the motherboard supports the memory. It is recommended that memory of the
same capacity, brand, speed, and chips be used.
Always turn off the computer and unplug the power cord from the power outlet before installing
the memory to prevent hardware damage.
Memory modules have a foolproof design. A memory module can be installed in only one
direction. If you are unable to insert the memory, switch the direction.
1-4-1 8-Channel Memory Conguration
This motherboard provides 8 DDR4 memory sockets and supports 8-Channel Technology. After the memory
isinstalled,theBIOSwillautomaticallydetectthespecicationsandcapacityofthememory.
CPU
DIMM-D
DIMM-C
DIMM-B
DIMM-A
DIMM-E
DIMM-F
DIMM-G
DIMM-H
- 13 -
Hardware Installation
1-4-2 Installing and Removing a Memory Module
Before installing a memory module, make sure to turn off the computer and unplug the
power cord from the power outlet to prevent damage to the memory module.
Be sure to install DDR4 DIMMs on to this motherboard.
Follow these instructions to install a DIMM module:
1. Insert the DIMM memory module vertically into the DIMM slot and push it down.
2. Close the plastic clip at both edges of the DIMM slots to lock the DIMM module.
3. Reverse the installation steps when you want to remove the DIMM module.
12
2
Note:
8 Channel DDR4 up to 3200MHz Memory Support
Supports 1 DIMM per Channel
Support for UDIMM (ECC), RDIMM, 3DS RDIMM.
- 14 -
Hardware Installation
1-5 Installing and Removing the M.2 SSD Module
Follow the steps below to install an optional M.2 SSD module on your motherboard.
Step1. Insert the M.2 SSD module into the slot.
Step2. Secure it with the screw, tightening as necessary to fasten the M.2 SSD module in place.
1
2
Follow the steps below to install a M.2 WiFi module on your motherboard.
Step1. Carefully Insert the M.2 WiFi module into the slot.
Step2. Secure it with the screw, tightening as necessary to fasten the M.2 WiFi module in place.
1-6 Installing and Removing the M.2 WiFi Module
- 15 -
Hardware Installation
1-7 Back Panel Connectors
1VGA Port
Connect to a monitor device.
2ID button with LED
Whenthesystemidenticationisactive,theIDLEDonthefront/backpanelglowsblue.
3USB 3.2 Type-A Port
The USB port supports the USB 3.2 specification. Use this port for USB devices such as a USB
keyboard/mouse,USBprinter,USBashdriveetc.
4USB 3.2 Type-C Port
The USB port supports the USB 3.2 specification. Use this port for USB devices such as a USB
keyboard/mouse,USBprinter,USBashdriveetc.
5GbE LAN Port
The Gigabit Ethernet LAN port provides Internet connection at up to 1 Gbps data rate. See the section
below for a description of the states of the LAN port LEDs.
6USB 3.2 Ports
The USB port supports the USB 3.2 specification. Use this port for USB devices such as a USB
keyboard/mouse,USBprinter,USBashdriveetc.
710/100/1000 Server Management LAN Port
The LAN port provides Internet connection with data transfer speeds of 10/100/1000Mbps. This port is
the dedicated LAN port for Server Management.
810GbE LAN Ports
The 10 Gigabit Ethernet LAN port provides Internet connection at up to 10 Gbps data rate. See the
section below for a description of the states of the LAN port LEDs.
9Line In Jack (Blue)
ThedefaultLineinjack.Usethisaudiojackforlineindevicessuchasanopticaldrive,walkman,etc
10 Line Out Jack (Green)
ThedefaultLineOutjack.Usethisaudiojackforaheadphoneor2-channelspeaker.Thisjackcanbe
usedtoconnectfrontspeakersina4/5.1/7.1-channelaudioconguration.
11 Mic In Jack (Pink)
ThedefaultMICInjack.AmicrophonecanbeconnectedtotheMICInjack.
12
3
4
5
68
7
9
6
10
11
- 16 -
Hardware Installation
LAN and ID Button LEDs
Link/Activity LED
Speed LED
LAN Port
Whenremovingthecableconnectedtoabackpanelconnector,rstremovethecablefromyour
device and then remove it from the motherboard.
When removing the cable, pull it straight out from the connector. Do not rock it side to side to
prevent an electrical short inside the cable connector.
ID button/LED:
10/100/1000 LAN LED:
State Description
Yellow On 1Gbps data rate
Green On 100Mbps data rate
Off 10Mbps data rate
State Description
Blue On Systemidenticationisactive
Off Systemidenticationisdisabled
10GbE LAN LED:
State Description
Yellow On 5Gbps, 2.5Gbps, 1Gps data rate
Green On 10Gbps data rate
Off 100Mbps data rate
- 17 -
Hardware Installation
1-8 Internal Connectors
Read the following guidelines before connecting external devices:
First make sure your devices are compliant with the connectors you wish to connect.
Before installing the devices, be sure to turn off the devices and your computer. Unplug the power
cord from the power outlet to prevent damage to the devices.
After installing the device and before turning on the computer, make sure the device cable has
been securely attached to the connector on the motherboard.
1) ATX 11) FP_1
2) P12V_AUX1/P12V_AUX2 12) BP_1
3) SATA_0_1/SATA_2_3 13) TPM1
4) CPU_FAN 14) IPMB
5) SYS_FAN1/2/3 15) CN_NCSI
6) SYS_FAN4/5 16) LED_BMC
7) SYS_FAN6/7/8 17) BAT
8) PMBUS1
9) FUSB30_1/FUSB30_2
10) COM1
CPU
DIMM-D
DIMM-C
DIMM-B
DIMM-A
DIMM-E
DIMM-F
DIMM-G
DIMM-H
4
16
17
1
2
3
5
6
7
8
9
10
11
12
13
14
15
- 18 -
Hardware Installation
1/2) ATX/P12V_AUX1/P12V_AUX2
(2x12 Main Power Connector & 2x4 12V Power Connector)
With the use of the power connector, the power supply can supply enough stable power to all the components
onthemotherboard.Beforeconnectingthepowerconnector,rstmakesurethepowersupplyisturnedoff
and all devices are properly installed. The power connector possesses a foolproof design. Connect the power
supply cable to the power connector in the correct orientation. The 12V power connector mainly supplies
power to the CPU. If the 12V power connector is not connected, the computer will not start.
To meet expansion requirements, it is recommended that a power supply that can withstand high
power consumption be used (500W or greater). If a power supply is used that does not provide the
required power, the result can lead to an unstable or unbootable system.
ATX
P12V_AUX1/ P12V_AUX2
8
5
4
1
113
1224
Pin No. Denition Pin No. Denition
1 3.3V 13 3.3V
2 3.3V 14 -12V
3 GND 15 GND
4 +5V 16 PS_ON
5 GND 17 GND
6 +5V 18 GND
7 GND 19 GND
8 Power Good 20 -5V
9 5VSB 21 +5V
10 +12V 22 +5V
11 +12V 23 +5V
12 3.3V 24 GND
Pin No. Denition
1 GND
2 GND
3 GND
4 GND
5 +12V
6 +12V
7 +12V
8 +12V
- 19 -
Hardware Installation
3) SATA_0_1/SATA_2_3 (SATA III 6Gb/s Connectors)
The SATA connectors conform to SATA III 6Gb/s standard and are compatible with SATA 3Gb/s standard.
Each SATA connector supports a single SATA device.
17
SATA3 SATA1
SATA2 SATA0
4/5/6/7) CPU_FAN/SYS_FAN1/SYS_FAN2/SYS_FAN3/SYS_FAN4/SYS_FAN5/SYS_FAN6/
SYS_FAN7/SYS_FAN8 (CPU FAN/System FAN Headers)
The motherboard has one 4-pin CPU fan header (CPU_FAN), and two 4-pin (SYS_FAN) system fan headers.
Most fan headers possess a foolproof insertion design. When connecting a fan cable, be sure to connect
it in the correct orientation (the black connector wire is the ground wire). The motherboard supports CPU
fan speed control, which requires the use of a CPU fan with fan speed control design. For optimum heat
dissipation, it is recommended that a system fan be installed inside the chassis.
1
Be sure to connect fan cables to the fan headers to prevent your CPU and system from
overheating. Overheating may result in damage to the CPU or the system may hang.
 Thesefanheadersarenotconfigurationjumperblocks.Donotplaceajumpercaponthe
headers.
4
Pin No. Denition
1 GND
2 TXP
3 TXN
4 GND
5 RXN
6 RXP
7 GND
Pin No. Denition
1 GND
2 +12V
3 Sense
4 Speed Control
- 20 -
Hardware Installation
8) PMBus Connector
The Power Management Bus (PMBus) is a variant of the System Management Bus (SMBus) which is
targeted at digital management of power supplies.
5
1
9) FUSB30_1/ FUSB30_2 (USB 3.2 Connector)
Theconnector/headerconformtoUSB3.2specication.EachUSBconnector/headercanprovidetwoUSB
ports via an optional USB bracket. For purchasing the optional USB bracket, please contact the local dealer.
Pin No. Denition Pin No. Denition
1 Power 11 IntA_P2_D+
2 IntA_P1_SSRX- 12 IntA_P2_D-
3 IntA_P1_SSRX+ 13 GND
4 GND 14 IntA_P2_SSTX+
5 IntA_P1_SSTX- 15 IntA_P2_SSTX-
6 IntA_P1_SSTX+ 16 GND
7 GND 17 IntA_P2_SSRX+
8 IntA_P1_D- 18 IntA_P2_SSRX-
9 IntA_P1_D+ 19 Power
10 NC 20 No Pin
120
11 10
Pin No. Denition
1 PMBus Clock
2 PMBus Data
3PMBus Alert
4 GND
5 3.3V Sense
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56
  • Page 57 57
  • Page 58 58
  • Page 59 59
  • Page 60 60
  • Page 61 61
  • Page 62 62
  • Page 63 63
  • Page 64 64
  • Page 65 65
  • Page 66 66
  • Page 67 67
  • Page 68 68
  • Page 69 69
  • Page 70 70
  • Page 71 71
  • Page 72 72
  • Page 73 73
  • Page 74 74
  • Page 75 75
  • Page 76 76
  • Page 77 77
  • Page 78 78
  • Page 79 79
  • Page 80 80
  • Page 81 81
  • Page 82 82
  • Page 83 83
  • Page 84 84
  • Page 85 85
  • Page 86 86
  • Page 87 87
  • Page 88 88
  • Page 89 89
  • Page 90 90
  • Page 91 91
  • Page 92 92
  • Page 93 93
  • Page 94 94
  • Page 95 95
  • Page 96 96
  • Page 97 97
  • Page 98 98
  • Page 99 99
  • Page 100 100

Gigabyte MC62-G40 User manual

Category
Servers
Type
User manual

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI