2. Atos
  3. Technical data Tracoe Comfort Plus

Atos Technical data Tracoe Comfort Plus Operating instructions

  • I've reviewed the datasheet for the Tracoe Comfort Plus tracheal tubes. The document provides detailed technical specifications, including dimensions for various sizes (07-11) . I'm ready to assist with any specific questions you have about the tubes.
  • What is ID-OC?
    What does OD-OC bc mean?
    What is the meaning of OD-OC bf?
    What does TL stand for?
    What does OB stand for?
Size ID-
OC OD-OC bc OD-OC
bf
ID-
IC TL OB BA
mm mm mm mm mm mm mm Ѳ°
07 7.0 8.8 10.5 5.8 81 87 100
08 8.0 10.2 11.3 6.8 84 91 100
09 9.0 11.6 12.6 7.6 86 94 100
10 10.0 12.0 13.7 8.7 88 97 100
11 11.0 13.5 15.0 9.7 91 100 100
ID-OC: inner diameter (clear width) at bottom of outer cannula;
OD-OC bc: outer diameter at bottom of outer cannula; OD-OC bf: outer
diameter of outer cannula behind the flange; ID-IC: inner diameter at bottom
of inner cannula; TL: length along center line from start of neck flange to
bottom of tube; OB: length along outer bend (greatest length); BA: bending
angle
Please be aware when switching a patient from another tube type in a cer-
tain size to one of the Tracoe Comfort tubes, the outer and inner diameter
should be considered.
ID-OC
ID-IC
OD-OC bc
OD-OC bf
BA OB
TL
Head office:
Atos Medical AB
Hyllie Boulevard 17
SE-215 32 Malmo, Sweden
Tel: +46 (0) 415 198 00
Email: info@atosmedical.com
Manufacturer:
Tracoe Medical GmbH
Reichelsheimer Straße 1/3
55268 Nieder-Olm, Germany
MC3049-TcEN 202306
© Coloplast A/S. All rights reserved.
Atos and the Atos Medical logo are
trademarks of Coloplast A/S.
Tracoe Comfort Plus
Technical Data
/