2. Article
  3. SKU19108

Article SKU19108, SKU19105 Assembly Instructions

  • Hello, I've reviewed the assembly instructions for the PACTERA Storage Bed. This document provides guidance on assembling the bed frame, attaching sideboards and casters, as well as installing the under-bed drawers. The guide highlights the importance of aligning the frame before tightening and notes that two people are required for installing drawers. I'm ready to help answer any questions you may have about assembling this bed.
  • What should I do before assembly?
    What should be ensured before fully tightening?
    How many people are needed to install drawer boxes?
    Why might the soft closing function not work?
    How to install the drawer?
If you’re having difficulty, our friendly Customer Care
team is always here to help. Call us at 1.888.746.3455
during business hours, email [email protected] or chat
live at article.com.
1 hour
Page 2 of 11
CASTER
SIDEBOARD LEFT
SIDEBOARD RIGHT
Page 3 of 11
Page 4 of 11
Page 5 of 11
Ensure the bed frame are aligned
perpendicular to each other before
fully tighten
Cut the plastic cable tie on part BL , BR, and
sides of part E before assembling
Page 6 of 11
Ensure the bed frame are aligned
perpendicular to each other before
fully tighten
Page 7 of 11
Page 8 of 11
Page 9 of 11
Page 10 of 11
Soft closing function might not work
when the drawer is fully loaded.
This is nature of the under bed drawer boxes
with undermount casters.
Drawer boxes must be
installed by two persons
To install the drawer, place the drawer on top of the slide.
And push closed until the latches click into place.
Page 11 of 11
/