Omron CK3M Firmware User guide

Omron
Brand
Omron
Model
CK3M Firmware
Type
User guide

Omron CK3M Firmware

Omron CK3M Firmware is a powerful tool that can help you upgrade the firmware on your CK3M device. This firmware comes with a user-friendly interface that makes it easy to update your device's firmware. With this firmware, you can also check the current firmware version of your device and perform a factory reset if needed. Additionally, the firmware provides various validations to indicate a successful firmware upgrade, giving you peace of mind.

The CK3M Firmware is a versatile tool that can be used in various applications. Here are some examples:

  • Upgrading the firmware on your CK3M device to the latest version

Omron CK3M Firmware

Omron CK3M Firmware is a powerful tool that can help you upgrade the firmware on your CK3M device. This firmware comes with a user-friendly interface that makes it easy to update your device's firmware. With this firmware, you can also check the current firmware version of your device and perform a factory reset if needed. Additionally, the firmware provides various validations to indicate a successful firmware upgrade, giving you peace of mind.

The CK3M Firmware is a versatile tool that can be used in various applications. Here are some examples:

  • Upgrading the firmware on your CK3M device to the latest version
1
Technical Note
CK3M Firmware
Upgrade Procedure
SV065-E-01
2
This document explains how to:
- Upgrade Firmware on the CK3M via Power PMAC IDE
Author: Jonathan Beltran
Editor: Dulce Varela
Date: 03/2020
Table of Contents:
1. Introduction: ...................................................................................................................... 3
2. Beginning Upgrade: .......................................................................................................... 3
3. Firmware Upgrade: ............................................................................................................ 5
3
1. Introduction:
The following tools are needed in order to properly upgrade the CK3M to the latest firmware:
- CK3M
- Power Cable (for CK3M)
- Power PMAC IDE
- Ethernet Cable
- File (Powerpmac_arm.deb)
2. Beginning Upgrade:
Begin by providing power (input 24VDC) to the CK3M located on the lower left-hand side of the device. (1)
NOTE: Verification will show a green LED appear on the top-left of device next to power (abbreviated PWR).
(Image 1: Power Supply Location to CK3M and Validation)
Next, connect an Ethernet cable from laptop/desktop to the Ethernet Port on the CK3M (this will allow
communication from the CK3M to IDE software). (2) Afterwards open the Power PMAC IDE 4 software.
(Image 2: CK3M Ethernet Connection Port)
4
To establish communication with the CK3M. (3) Select “Communication Setup” located on the top-left of the
PMAC IDE’s navigation bar. Apply the proper settings for the device including IP Address, Protocol, User, and
Password. Once the desired settings are established, select the “Test” button. Verification to proper connection
from the CK3M will show a message indicating “Power PMAC connection successful. Select OK to Apply or
Cancel to go back to Device dialog”. (4)(5)
(Image 3: Communication Procedure)
(Image 4: Communication Sucessful Message)
(Image 5: Terminal Communication Validation Messages)
5
NOTE: After successfully establishing communication. Users are recommended to check the current
firmware version, before proceeding. Type the following command in the Terminal window (6): “vers”.
(Image 6: Power PMAC “vers” Terminal Response, Current Firmware Version on Device)
3. Firmware Upgrade:
In the IDE software, proceed to navigate to “Delta Tau->Update Firmware” located in the menu bar. The
following window titled “Firmware” will display. Click the “Download Firmware” button, a message will appear
stating a factory reset is recommended for Power PMAC before proceeding, select “OK”. (8) Afterwards, navigate
and select the stored file on laptop/desktop named “Power_pmac.deb”. (9) Power PMAC IDE will then perform
the firmware update. During this time, PMAC IDE will process a reboot.
(Image 8: Update Firmware Window)
(Image 9: PowerPmac_Arm.deb Image File)
6
NOTE: It is important not to disable power/disconnect Ethernet during this process. IDE will disconnect
from device which will display a red bar on the top of the IDE. Once firmware update is completed,
multiple validations will indicate that a successful firmware upgrade has been finished. The various
validations will indicate a green bar appearing at the top of the IDE screen showing device is re-
connected, the terminal window indicating a successful connection, and the firmware screen window also
establishing a successful connection. On the top of the IDE (within the green bar), there will now show
the newest uploaded firmware version as verification. (10)
(Image 10: Successful Firmware Upgrade message, and Firmware Version is updated)
4. Power Cycle Validation
Upon completing the upgrade, it is recommended to power cycle the device and repeat step 2, validating the
device’s current firmware version (IMAGE 6). The terminal will display the successful upgrade version.
If issue’s do arise and the firmware upgrade did not successfully upgrade:
PLEASE CONTACT ODT SUPPORT FOR FURTHER ASSITANCE.
ODT TECHNICAL SUPPORT: 818 717-5656
OMRON CANADA, INC. • HEAD OFFICE
Toronto, ON, Canada • 416.286.6465 • 866.986.6766 • automation.omron.com
OMRON ELECTRONICS DE MEXICO • HEAD OFFICE
Ciudad de México • 52.55.5901.4300
• 01.800.386.6766 • [email protected]
OMRON ELECTRONICS DE MEXICO • SALES OFFICE
San Pedro Garza García, N.L. • 81.12.53.7392 • 01.800.386.6766 • [email protected]
OMRON ELECTRONICS DE MEXICO • SALES OFFICE
Eugenio Garza Sada,León, Gto • 01.800.386.6766 • [email protected]
OMRON ELETRÔNICA DO BRASIL LTDA • HEAD OFFICE
São Paulo, SP, Brasil • 55 11 5171-8920 • automation.omron.com
OMRON ARGENTINA • SALES OFFICE
Buenos Aires, Argentina
• +54.11.4521.8630
• +54.11.4523.8483
[email protected]
OTHER OMRON LATIN AMERICA SALES
+54.11.4521.8630 • +54.11.4523.8483 • [email protected]
Authorized Distributor:
SV065-E-01
Note: Specifications are subject to change. © 2020 Omron. All Rights Reserved. Printed in U.S.A.
Printed on recycled paper.
OMRON AUTOMATION AMERICAS HEADQUARTERS • Chicago, IL USA • 847.843.7900 • 800.556.6766 • automation.omron.com
Controllers & I/O
• Machine Automation Controllers (MAC) • Motion Controllers
• Programmable Logic Controllers (PLC) • Temperature Controllers • Remote I/O
Robotics
• Industrial Robots • Mobile Robots
Operator Interfaces
• Human Machine Interface (HMI)
Motion & Drives
• Machine Automation Controllers (MAC) • Motion Controllers • Servo Systems
• Frequency Inverters
Vision, Measurement & Identification
• Vision Sensors & Systems • Measurement Sensors • Auto Identification Systems
Sensing
• Photoelectric Sensors • Fiber-Optic Sensors • Proximity Sensors
• Rotary Encoders • Ultrasonic Sensors
Safety
• Safety Light Curtains • Safety Laser Scanners • Programmable Safety Systems
• Safety Mats and Edges • Safety Door Switches • Emergency Stop Devices
• Safety Switches & Operator Controls • Safety Monitoring/Force-guided Relays
Control Components
• Power Supplies • Timers • Counters • Programmable Relays
• Digital Panel Meters • Monitoring Products
Switches & Relays
• Limit Switches • Pushbutton Switches • Electromechanical Relays
• Solid State Relays
Software
• Programming & Configuration • Runtime
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7

Omron CK3M Firmware User guide

Omron
Brand
Omron
Model
CK3M Firmware
Type
User guide

Omron CK3M Firmware

Omron CK3M Firmware is a powerful tool that can help you upgrade the firmware on your CK3M device. This firmware comes with a user-friendly interface that makes it easy to update your device's firmware. With this firmware, you can also check the current firmware version of your device and perform a factory reset if needed. Additionally, the firmware provides various validations to indicate a successful firmware upgrade, giving you peace of mind.

The CK3M Firmware is a versatile tool that can be used in various applications. Here are some examples:

  • Upgrading the firmware on your CK3M device to the latest version
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents