2. AMG
  3. Ademco-Microtech Galaxy Intruder Alarm Equipment D04195-00

AMG Ademco-Microtech Galaxy Intruder Alarm Equipment D04195-00 Installation guide

  • Hello! I've reviewed the Interconnection Details document for AMG video, audio, and data transceivers. This document outlines how to connect these devices with Ademco-Microtech Galaxy Intruder Alarm Equipment using RS485. It specifies the pin configurations for data input/output for mentioned models: AMG2261, AMG2241, AMG2151, and AMG2131. I'm ready to assist you with any questions you have about this document or these devices.
  • What is the data interface used?
    What does the document describe?
    What are the pin connections for RS485 A and RS485 B?
AMG Systems Ltd. reserve the right to make changes to this document without notice. The
information herein is believed to be accurate. No responsibility however is assumed by
AMG for its use.
Page 1 of 1 D04195-00
Vision™ &
Ademco-Microtech
Equipment
Interconnection Details for Ademco-Microtech
Galaxy Intruder Alarm Equipment.
AMG Vision™ DATA INTERFACE: RS485 2 WIRE UNTERMINATED
Part Numbers:
STANDALONE UNITS RACKMOUNT UNITS
AMG2261 VIDEO Tx + DATA Tx/Rx AMG2151 VIDEO Rx + DATA Tx/Rx
AMG2241 VIDEO Tx + DATA Tx/Rx + AUDIO Tx/Rx AMG2131 VIDEO Rx + DATA Tx/Rx + AUDIO Tx/Rx
For Rackmount, Long Distance and Single Fibre Unit For Standalone, Long Distance and Single Fibre Unit
part numbers contact AMG Systems. part numbers contact AMG Systems.
PIN CONNECTIONS:
GALAXY EQUIPMENT AMG EQUIPMENT
(GENERIC) (GENERIC)
RS485 A PIN 9 – [ Data I/O (B) - ]
RS485 B PIN 8 – [ Data I/O (A) + ]
AMG Systems Limited
Tel: +44(0)1767 600777
Fax: +44(0)1767 600077
Email: sales@amgsystems.co.uk
P
L
1
JP3
JP3
1
3
5
7
9
2
4
8
10
6
RS485 (2 wire)
Internal TX
Data
Co
ntr
o
l
LEDs
VIDEO
AUDIO
DATA
POWER
JP3
RS485 (2 wire)
1
2
3
4
57
8
9
10 6
JP3
Internal TX
data controlled
/