2. AMG
  3. Meyertech Connections D04579-00

AMG Meyertech Connections D04579-00 Installation guide

  • Hello, I've reviewed the document detailing the interconnection of AMG2261 and AMG2151 units for Meyertech camera control using RS422 interface. The document describes pin connections for both camera and control room sites and explains the use of RS485 for data transmission. I am ready to answer your questions regarding this document.
  • What is the data interface used?
    What is the model number for the video transmitter unit?
    What is the model number for the video receiver unit?
    What is the data output pin for the transmitter?
    What is the data input pin for the receiver?
    What is the state of all the jumpers?
AMG Systems Ltd. reserves the right to make changes to this document without notice.
The information herein is believed to be accurate. No responsibility however is assumed
by AMG for its use.
Page 1 of 1 D04541-01
P
L
1
1
3
5
7
9
2
4
8
1
6
JP3
JP3
1
3
5
7
9
2
4
8
10
6
RS485 (2 wire)
Internal TX
Data Control
Vision™&
Meyertech
Interconnection Details for Meyertech Camera Control
and
AMG Vision 2000
AMG Vision™DATA INTERFACE: RS422 4 WIRE UNTERMINATED
Part Numbers:
Video TX Standalone Units – Camera Video Rx Rackmount Units - Controller
AMG2261 Video TX + Data Tx/Rx AMG2151 Video Rx + Data Tx/Rx
All Jumpers off All Jumpers Off
PIN CONNECTIONS:
Camera Site - 2261
Meyertech AMG2261
RX +ve PIN 11 – [Data 0ut (B) -ve]
RX –ve PIN 10 – [Data Out (A) +ve]
LEDs
VIDEO
AUDIO
DATA
POWER
JP3
RS485 (2 wire) 1
2
3
4
57
8
9
10 6
JP3
Internal TX
Data controlled
AMG Systems Ltd. reserves the right to make changes to this document without notice.
The information herein is believed to be accurate. No responsibility however is assumed
by AMG for its use.
Page 2 of 1 D04541-01
Control Room Site - 2151
Meyertech 2151
TX +ve Pin 4 PIN 9 – [Data I (B) -ve]
TX –ve Pin 3 PIN 8 – [Data I (A) +ve]
AMG Systems Limited
Tel: +44(0)1767 600777
Fax: +44(0)1767 600077
Email: [email protected]
/